Question about Konica Minolta magicolor 5430 DL Laser Printer

1 Answer

Konica magicolor 5430 smuding all over page

Hello,

I bought a "refurbished" 5430DL printer last August and barely have used it. Recently, when I attemp to print, it comes out with a light to darkish grey tone over the entire page. A few times, it came out blue, so I changed to black and white printing. It was fine for a bit, now its grey all over again. When could cause this. The tech said it may be the motherboard. Thank you.

Posted by on

  • Joyce Hesketh
    Joyce Hesketh Sep 25, 2008

    When printing I get a blue haze over the whole page.  My waste toner cartridge was full and I emptied that but I still get the same dotted haze of color over the whole page.

  • kasher2 Sep 28, 2008

    blue prints over entire page after cleaning everything. black prints fine.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 214 Answers

Also there can be problem with the waste toner pipes, that the waste toner wont go away and smug the page. check waste toner box also check transfer belt and pc drums that they are clean.

Posted on Jun 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Magicolor 5430DL firmware


located at a secure Konica Minolta web site seem that Konica Minolta protects their Copier/printer firmware, available to only Konica Minolta dealerships and KMBS, need a tech

Feb 15, 2014 | Konica Minolta magicolor 5430 DL Laser...

1 Answer

Magicolor 5430 dl printer driver needed for windows 7


Try downloading this
Extract and go to
mc5430DL_Win7_v2.0.1.0\English\English\setup.exe
Run this setup file.
Install the components that you want.
If you select local and USB ensure printer is plugged in to your computer.
Hope this helps.

Feb 14, 2013 | Konica Minolta magicolor 5430 DL Laser...

1 Answer

How do i load a firmware upgrade on a Konica Minolta 5430DL


it requires some firmware files and another software, which you cannot get easily.so its better to call konica minolta's representative.

May 19, 2010 | Konica Minolta magicolor 5430 DL Laser...

1 Answer

Konica Minolta 5430dl wrinkles paper when printing. How do I fix?


suggestions= check the tray, that papers are properly inserted in the tray, papers should be moist free, this problem can also be caused by dusty pickup rollers, which picks the paper and also due to fixing unit problem.

Apr 21, 2010 | Konica Minolta magicolor 5430 DL Laser...

1 Answer

How do I print 8-1/2" x 14" paper. I only have one 8-1/2" x 11" tray? Konica Minolta Magicolor 5430DL


On the 5430 DL there is an aux legal tray that can be purchased for legal printing. On a later successor the 5550 a manual feed option was included, however for the 5430 there is no option for printing legal without the extra tray being installed. On a side note, I have this tray and when not printing legal it lets me load an extra 500 sheets of letter paper which is very convenient when I need to print a bunch of sheets overnight.

Mar 15, 2010 | Konica Minolta magicolor 5430 DL Laser...

1 Answer

Magicolor 5430dl, "No Toner Magenta" error


Hi this might work, have you tried to remove the toner and re-seat it??
If this doesnt work very carefully take the toner somewhere well ventelated preferablly outside and give it a good shake for about 15-20 seconds, this frees any clogged toner there may be.

Failing all of that you would want to try outting a new toner in and see what happens.

Mar 05, 2009 | Konica Minolta magicolor 5430 DL Laser...

1 Answer

Konica Minolta 5430DL error code 111112


I couldn't find the install disks so downloaded the driver from the Konica website, un-installed the software and re-installed it. After calibrating the colours everything seems fine now.

Oct 01, 2008 | Konica Minolta magicolor 5430 DL Laser...

3 Answers

Konica minolta 5430dl colour printer


13D0H: Parameter Chip failure

Unplug the power cord and plug it in, then turn
OFF and ON the Power Switch.
the PWB-A may be faulty.

May 21, 2008 | Konica Minolta magicolor 5430 DL Laser...

1 Answer

Printing colours?


solutions :
Try changing consumables, if near emty or maybe with defect.
If it does't help, there may be problem with cleaning system, then you have to call for service.

First try consumables

Apr 11, 2007 | Konica Minolta magicolor 5430 DL Laser...

Not finding what you are looking for?
Konica Minolta magicolor 5430 DL Laser Printer Logo

394 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Printers & Copiers Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5695 Answers

David Burkhart
David Burkhart

Level 2 Expert

207 Answers

George Mclaughlin

Level 2 Expert

330 Answers

Are you a Konica Minolta Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...