Question about Sport & Outdoor - Others
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There are four o2 sensors on this truck. one on each side just below the exhaust manifold, and one on each side behind the second catalytic converters. (just about even with the back of the front doors.
Posted on Jun 18, 2008
the heater bypass is quite simple, if you look at the firewall you will see two medium sized coolant lines, remove them from the firewall and link them together using a proper sized tube, you can purchase a kit at a parts store quite cheaply
Posted on Oct 11, 2008
when you look at the back are there three small rectangular indents evenly spaced on the edge on the back? If so you'll need a special tool for opening waterproof watches. the tool adjusts to fit the three indents then press down as you turn counterclockwise. you can find the tool on amazon.com or your local jewelry store. make sure the gasket is in place and not damaged before screwing the back on.
here is a link to the tool
Posted on Jan 23, 2009
First, snap out the black pieces that attach the cover to the seat with a pair of pliers or a kitchen knife. Then turn the seat over and remove the base by sliding out the metal rod that runs thru the base and seat. Then unhook the center buckle from the bottom of the seat and back up thru the seat. Unhook the straps from the metal bar on the back of the seat and thread them back thru the seat. Be sure to remember the order in which you slide it thru the components so you can reassemble. It may be helpful to lay them out in the order you removed them. Unhook the elastic bands holding the bottom in place and slide it over the top part of the seat and off the seat. If you need to remove the top part and wash, remove the black pieces the same way as the bottom, unhook all elastic and slip it off the top. I wash mine in cold water with mild detergent and usually let it air dry so as to not shrink it. Reassemble by reversing steps.
Posted on Jun 15, 2009
Tips for a great answer:
May 01, 2015 | 2007 Ford Explorer Eddie Bauer
Jul 31, 2013 | Exercise & Fitness
Apr 29, 2012 | Eddie Bauer Baby Gear
Apr 27, 2012 | Eddie Bauer Adventure Travel System Bryant...
Nov 10, 2011 | Sportline 345 Electronic Pedometer
Jun 21, 2011 | Eddie Bauer Baby Gear
Jan 16, 2010 | Eddie Bauer Vector Sport - Titanium Jogger...
May 02, 2009 | Eddie Bauer 22757MRC Convertible Car Seat
147 people viewed this question
Usually answered in minutes!