Question about Euro-Pro 9105 Computerized Sewing Machine
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
First make sure the needle is in the machine correctly- all the way up into the needle bar and that it is threaded correctly, etc
If this all checks out ok, take the bobbin case out of the machine. There are two ears on either side of the bobbin case- turn the left one to the left and the right one to the right. Remove the silver ring, and inspect the piece of metal that the ring came off of (looks like a circle with the top cut off). You have to locate the hook which is the piece that looks like a half moon inside the big round metal piece. Locate the tip of it, turn the handwheel toward you until the needle is in the lowest position, at this point the tip of the hook should be flush with top of the left side of the cut off circle. If this is not so, your machine needs to be re-timed which can be done from the bottome of the machine usually.
Let me know if you need any help with this
Posted on May 23, 2008
I hope this helps. It took some searching but this is what i found. Good luck!
Posted on Jan 22, 2010
Tips for a great answer:
Oct 19, 2013 | Euro-Pro 9105 Computerized Sewing Machine
Jul 05, 2012 | Euro-Pro 9105 Computerized Sewing Machine
Aug 30, 2011 | Euro-Pro 9105 Computerized Sewing Machine
Jul 31, 2011 | Euro-Pro 9105 Computerized Sewing Machine
Oct 30, 2009 | Euro-Pro 9105 Computerized Sewing Machine
Jun 24, 2009 | Euro-Pro 9105 Computerized Sewing Machine
61 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: