Question about InFocus Proxima UltraLight LX1 Multimedia Projector

2 Answers

Image looks like it has graph paper in the background

Colors are good, light is bright, but the unwanted images must go

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

If it's very tiny, you are looking at the individual lcs elements (it's a sign you have the unit in focus). It's the lowest level of resolution in the projector and if you are projecting an image from your PC, that's the pixels you will see projected.

This is not a "problem", it's the nature of the system - just as there is a pixel limit on your lcd panel or monitor.

Try projecting a picture and then go up to the screen and you will see what I mean.

Posted on Apr 18, 2010

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 31 Answers

If it looks like a VERY tiny grid then that's an effect called "screen door." It tends to mainly plague LCD-type projectors and is a bit evident with DLP-type projectors. Unfortunately there is no fix for this issue.

Posted on Jun 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have what looks like black sots/dust on my projected image. I thought it might have been the bulb but after replacing and cleaning the color wheel i am still seeing the "dusty" image.


Hi Jay,

It sounds like you are having some issues with the polarizing plates. If you are in the US, I can have one of our technicians speak with you. Feel free to check out our website and send us a message. Projector Repair Bulb Replacement

Jan 27, 2014 | InFocus IN104 Projector

1 Answer

Image very dark


go nto the main setting and clear everything and reset it you will have to start from new but the brightness will improve

Apr 29, 2013 | Optoma MovieTime DV10 Multimedia Projector

1 Answer

Light is bright but the image rapidily switches colores. And this toggles off and on. Is this a bad bulb?


hi,
You have to check the color wheel of your projector. If the colour wheel dosen't sync with DLP then this type of complaint can occur. You have to remove and clean the color wheel and its rpm counter sensor. Have added the picture of colur wheel for yur refference.
OK

Aug 16, 2011 | ViewSonic PJD6531W Projector

1 Answer

The projector is not giving a bright picture. The image on the wall is very dim


I you were using the projector in the same room with the same ambient light and if you notice this problem try increasing brightness, if still the brightness is not sufficient then it is time to replace the projector lamp.


If you have moved your projector to a different place, check if the existing light / ambient light in that room is making the image look dull / not so bright. If this is the case, try to reduce the ambient light

Mar 09, 2011 | Dell 1100MP Multimedia Projector

1 Answer

I have a viewsonic pj500 projector which has functioned perfectly for 5 years. Now the area around the image area either shows a dark blue with dark stripes and the image area has a yellow cast which seems...


LCD projector 101, your blue device is dying inside of projector. Consider purchasing a dlp based product, they do not suffer from color decay.

Really you are blessed , most lcds last about 3-4000 hours or 4 lamp changes. good luck

Apr 13, 2009 | ViewSonic PJ500 Multimedia Projector

1 Answer

Proector image is dim


I have changed the bulb on my LG projector recently. I found the rotating colour wheel to be full of dust. Upon opening the cavity where the light is redirected and reflected onto the imager, I saw all mirrors also had a layer of dust. I don't think it was so dirty that it affected the brightness of the image, but I cleaned it anyway using an earbud. I cleaned both sides of the color wheel as well. You need to be careful in working with the optics of the projector!

Sep 05, 2008 | InFocus X1 Multimedia Projector

1 Answer

Color problem after warm up.


The probelm is caused by either a bad color wheel sensor, color wheel or formatter board. I have the new redesigned sensor assembly and color wheels that I can sell. It is best if you send me the projector for proper diagnosis.

Apr 30, 2008 | HP vp6320 Multimedia Projector

1 Answer

Lately, all "white" objects, text, spaceships, etc. have "glows"


Do you also have a glow around the projected image, try projecting on a white wall without any borders. The cause for this is dirt inside the lens elements diffusing the light.

Oct 22, 2007 | InFocus ScreenPlay 4805 Multimedia...

Not finding what you are looking for?
InFocus Proxima UltraLight LX1 Multimedia Projector Logo

537 people viewed this question

Ask a Question

Usually answered in minutes!

Top InFocus Multimedia Projectors Experts

Juan Carlos Pacheco

Level 1 Expert

36 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5612 Answers

Are you an InFocus Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...