Question about Scott LCT37SHA TV

2 Answers

My Scott Remote Control #KC01-B1 one night just would not connect to the sensor in my tv. I thought my batteries were low and changed them. The remote would still not work. I went to a Radio Shack store in New Milford, CT and asked the person there if I put the batteries in wrong and explained my problem and said since the TV was only 3 years old bought on 2/1/07, he did not know why I was having this problem. Since then, I have bought 2 Universal remote controls and have not been able to put the tv on with it and have to do it manually. Is there a way I can send my Scott remote to see if it can be repaired as I am very frustrated and disappointed in the Scott product. Or do you have any suggestions. Thank you and looking forward to having you help me in my dilemma.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Scott Master
  • 8,457 Answers

The Scott remote is 3 years old,it out warrenty and it junk now.The Scott remote control the CPU chip is dead,that why the tv sensor is not sensing the Scott remote anymore.Return those 2 universal remotes to the store,where u bought them.No used,if those codes on the owner manual for those 2 universal remotes don't function the tv.Try website like Remotes.com to buy an exact remote to the old Scott remote.

Posted on Oct 16, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,140 Answers

Before you throw any more money at this problem, have you considered that the problem might be with the Infra-red (IR) receiver in the TV?

Also, did you programme the correct codes for your Scott TV into the universal remote/s? If you can let me know the model number/s of the universal remote/s - and you still have them - I can probably verify the codes and the programming instructions.

Hope this helps.

Posted on Oct 16, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Akai PDP5073TM with a Akai KC01-A1 control and the remote control is not working.


Check the remote control for its infrared emission. Check it with fresh batteries. Check it by pressing all the keys. You can detect the presence of infra-red emission from the remote control, using a cell-phone camera. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about it. Surf the site with patience. In some cases, the remote control might need to clean.
http://remotesearch.blogspot.com/
Search the site by type in this key phrase "how to test a remote control "in the "search box at the top right of the display window of the Homepage" to get the related post quickly.
https://www.youtube.com/watch?v=jsSCNCW3IbQ [open and clean]
https://www.youtube.com/watch?v=Qp-l1uh-5gE [open and clean]

If it is found OK, check and replace the infrared sensor inside the TV. If you wish to get some details; check the site linked here. It has details about how to check a remote control; by one among the post. Surf the site with patience. Pull up older posts. If the remote control is found OK; check and replace the infra-red sensor inside the TV. Contact any service technician.

Nov 27, 2016 | Akai Televison & Video

1 Answer

Sorry, the Scott tv I just wrote about with the remote that doesn't work is model# LCT 32SHA


Check the remote control for its infra-red emission. Check it with fresh batteries. If it is found OK, check and replace the infrared sensor inside the TV. If you wish to get some details; check the site linked here. It has details about how to check a remote control; by one among the post. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ If remote control is OK, check and replace the infra-red sensor inside the TV. Contact any service technician.

Oct 21, 2014 | Scott LCT37SHA TV

1 Answer

Tv volume control


Since it works when close, more likely the battery in the remote is running low, or you have some dust over the remote sensor on the front of the tv panel.

Mar 08, 2014 | JVC Televison & Video

2 Answers

How to replace the remote control for the 32"Scott KC01-B1


You just buy a replacement remote control, put battery inside, and the replacement remote will be ready to use.

You can find a replacement remote from one of the links below:

Scott KC01B1 Replacement Remote Control

NewRemoteControl New OEM Replacement Remotes

eBay Feedback Profile for buyeverythingguy

discount replacement Scott tv remote

Apr 16, 2009 | Televison & Video

1 Answer

Scott TV remote not working


yes the sensors on all sets go bad and the remote signals will never get to the eprom chip that takes the signals and processes them

Dec 29, 2008 | RCA 32V420T 32" TV

1 Answer

Need setup codes for Akai KC01-B2 to run with comcast remote


I recently bought a used LCT2060 that had no remote. I figured my comcast cable remote would work without a problem but it didn't. So 3 universal remotes later I found my solution...a radio shack2_bing.gif universal gamer remote. It controls up to 5 components plus your xbox360, playstation and pc. The price on sale was a mere 12.97, not bad if you ask me. Hope this helped. The code that worked for the Akai2_bing.gif was 11676. Take care...

Dec 27, 2008 | Akai LCT2785TA 27 in. LCD Television

1 Answer

Lcd tv not receiving remote control signal


Whatever circuit board the remote signal is received on is faulty.

May 19, 2017 | Televison & Video

2 Answers

Need setup codes for Akai KC01-B2 to run with comcast remote


I have an Akai 42"lct & had the same problem. I bought an universal remote URC R6 at walmart for $19. I can now control the tv, u-vrerse cable, panasonic surround system & still have the aux open. You must use the "learn" method but I can control channels, volume, record, menues for all devices as well as setup, record for dvr & more. I hope this helps.........

Jan 29, 2008 | Akai CF2791 27" TV

3 Answers

Comcast remote


true most all the new lcd panels use a new code that no remote has.
about all you will be able to find is the on/off code if you scan for it.

Jan 06, 2008 | RCA Universal Remote Control

Not finding what you are looking for?
Scott LCT37SHA TV Logo

389 people viewed this question

Ask a Question

Usually answered in minutes!

Top Scott Televison & Video Experts

Radames Pagan
Radames Pagan

Level 3 Expert

196 Answers

Sp Gupta

Level 3 Expert

681 Answers

CoppellTVRepair.com

Level 3 Expert

749 Answers

Are you a Scott Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...