Question about Uniden DECT 6.0 Cordless Phone ID

1 Answer

No caller ID. TP company says I have service.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 38 Answers

  • Did you fully charge your phone? - Make sure you fully charge for 16-24 hours .

  • Is the battery old? - Replace the battery.

  • Is the electrical outlet switch turned on? - If you are using AC (electrical) power, make sure that the unit is connected to a non-switched electrical outlet.

  • Are the connecting wires tight - Unplug the AC power converter from the unit and plug it back in.

  • Do you have Caller ID service with your telephone company - In order to receive Caller ID records, you must subscribe to the standard name and number Caller ID service available through your local telephone company. If the Caller ID works for normal calls but not on Call waiting calls, then you must contact your phone company to get the combined CID/CW service.

  • Caller ID shows up after second ring - Be sure to wait until the second ring before answering. Caller ID signals comes through after the first ring, if caller pick ups phone too soon Caller ID signal will not be transmitted to the handset.

  • Confirm that caller ID is still working on that particular line by checking another phone on the same line - If Caller ID is not coming through contact your phone company provider.

If this does not fix your problem, contact your authorized Service Center.*

Posted on Oct 16, 2010

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Caller ID Light Won't Stop Blinking on Base of KX TC1713 Phone

Solved this myself simply by scrolling through all the Caller ID entries from recent calls . . .

Posted on Mar 02, 2008

  • 201 Answers

SOURCE: Caller id

Unfortunately just adding caller ID to your phone line will not work with many business phone systems, especially older systems.

You can have this phone on one of several different Toshiba phone systems. The system must have caller ID equipment installed and programmed correctly for caller ID information to be shown on your phone's display.

Caller ID information is transmitted between the first and second ring. With business phone systems the system itself needs to collect this information and then pass it along to any phones that are programmed to ring at any given time.

Posted on Oct 27, 2007

feelfemi009
  • 277 Answers

SOURCE: Have Durabrand-Model HAC PH-540

you can do that through your network service provider

Posted on Jul 17, 2009

  • 17 Answers

SOURCE: StarTalk Flash is 1.7.00 + caller ID

The Star Talk Flash is a voice mail prduct. The caller ID feature is a phone system feature. If your system is a norstar CICS or a MICS the caller ID will work only if you have the caller ID capable central office circuit packs installed. Look on the card and see if the label has "CLID". If it dose there is also additional programming required for each set under.... terminals &sets/telco features/featue assignments/show line/caller ID...set:Y. You also have to program (under sets) /telco features/caller ID: Y.

Hope this helps.

Posted on Mar 24, 2010

  • 6771 Answers

SOURCE: I just purchased a slim caller id phone. The

If the phone company has got everything in place, it means the driver ic that controls the LCD is defective. Since it is new I recommend taking back for exchange.

Posted on Jan 12, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Just bought KX-TGD225 phone system and can't get the caller Id function to work even though I subscribe to caller ID with the phone company. The talking caller ID works but no display on the phone


Please call your phones service provider, they may charge for this service. Just because the phone is capable of caller ID function doesn't mean it is a free service.

Jun 21, 2016 | Panasonic NEW Expandable Digital Phone...

1 Answer

How do I set up caller ID? Does it need a battery for this?


First you need to make sure your phone is Caller ID - the initials "CID" are on the phone somewhere -

then you'll need to call your local phone company and subscribe to Caller ID service.

This is usually the case for landline service, as far as cellular service goes, Caller ID is generally included with the package.
Hope this helps.

Feb 29, 2016 | AT&T 944 Corded Phone

1 Answer

I have caller id service with my phone company; Why does my Radio Shack heavy duty wall phone with caller id display all rows of 8's in the caller id area?


It's radio shack... kidding, depending upon the age of it, the lcd black/grey display may have gone bad... from dropping or age or defect.

Feb 12, 2015 | Radio Shack Lands Phones

1 Answer

Why does my handset no longer show my caller I.d. information? And the chargeight on my base stays on even when the hand set is removed, why?


Hi Debra,
There are several reasons that this could happen:
1. Your telephone company stopped the service, even though you are paying for it... Ask your telephone company to verify your Caller ID service is current.
2. There may be a problem with your Caller ID service. Ask your telephone company to check to see if there are any problems.
3. Sometimes the caller ID is delayed, try letting incoming calls ring at least twice before answering.

The "charge" light staying on is very unusual, It could mean that the battery is failing, but if it is working properly, don't worry about it.

Best regards,
Bill

Oct 25, 2014 | Uniden DECT1560 DECT 6.0 Expandable...

2 Answers

Caller id is not working in my cordless phone. Instead of number of a caller, "Incoming Call" is showing. Please help me


Caller ID on landline phones relies on signals from the telephone service provider. Some companies charge extra if you wish to enable the service, others include it automatically, so you need to check with them first.

Even if you have caller ID enabled, callers can choose to withhold their number. Large companies which make lots of outgoing calls (especially cold callers) often have their service set to automatically withhold their number. In many countries, all other callers can choose to do so by prefixing all dialled numbers with a short code, e.g. in the UK it's 141. Mobile phone callers can usually alter a setting on their handset so that caller ID is withheld when making outgoing calls.

Sep 29, 2011 | Lands Phones

1 Answer

I have a Dect1015 phone and have accidentally deleted the caller ID and phonebook and would like to turn them back on.


Hi,
* Caller ID and POP features work only if you subscribe to the service provided by your local telephone company. There is usually a fee for this service.
You need to call your phone line company to activate the Caller ID.

Thank you for using fixya
Please rate me and give testimonials if ever to continue my assistance

Jun 04, 2011 | Cell Phones

2 Answers

Caller i.d. doesn't work piece of junk


Please download this manual, and study e.g on page 21 About caller ID If you subscribe to caller ID service from your local telephone company, this feature displays the name and telephone number of the caller before answering a call (even when you are on another call). The caller ID features of this product will work only if you subscribe to caller ID service and both you and the caller are in areas offering caller ID service, and if both telephone companies use compatible equipment. Contact your local telephone company if: • you have both caller ID and call waiting, but as separate services (you may need combined service), • you have only caller ID service, or only call waiting service, • you do not subscribe to caller ID or call waiting services but wish to try them. There may be fees for these services, and they may not be available in all areas. This product can be used without subscribing to either caller ID or combined caller ID with call waiting service, although the caller ID features of this product will not function.
http://www.vtechphones.com/docMgt/public/art/52882/6041_manual.i4.pdf

Mar 12, 2010 | Vtech Cordless 6041 Phone

1 Answer

How to get a caller display service on the cordless phone


Buy a cordless phone that has caller ID and if you don't already have caller ID service you need to order it from your phone company.Most every new cordless phone has caller ID

Aug 29, 2009 | Lands Phones

1 Answer

I have call waiting and caller ID through my phone company. I have two Uniden phones--EXA17980 and EX15160 cordless phones. Both phones should display the caller ID while I am on the phone with another...


You're right, at least one of them should. You should contact your telephone company and ensure you have Caller ID while on Call Waiting service (CIDCW) - it's not always the same as just Caller ID. Sometimes they'll want even more money. :)

Mar 09, 2009 | Uniden Cordless Phone

Not finding what you are looking for?
Uniden DECT 6.0 Cordless Phone ID Logo

824 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

Cindy Wells

Level 3 Expert

5052 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...