Question about Epson Stylus Photo R300 InkJet Printer

1 Answer

EPSON R360 ERROR MESSAGE.

Hi can you help me please i have a epson R360 printer it says in the veiw
window (error) waste ink pad in printer is saturated.
contact your dealer to replace it is this somethink i could do myself
as i got it about 4 months ago from a computer fair and i have lost my
paper work for it

Posted by on

  • jas2 Dec 31, 2008

    "General Error. See your printer documentation for information about clearing the error."
    Tried the "Power/Stop/Ink" turn on procedure, got this -
    "CLEAR WASTE INK CTR"
    "FINISHED"
    "TURN OFF"
    "PRINTER POWER"

    This did NOT fix the problem. Next power up give the same old "General Error.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I will kill you understood do not ask again mothers abuse

Posted on Jun 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

The printer's ink pads are at the end of their service life. Please contact Epson support.


The printer's ink pads are at the end of their service life. Please contact Epson support.

Nov 30, 2011 | Epson Stylus Multifunction Inkjet Printer/...

1 Answer

How do I reset the sensor after a waste pad error message for an Epson 7000? The pad is not full and I need to reset so I can print.


Hi


Normally your remedy is to replace the "Waste Ink Pad/Pads" with a new one/ones and then reset the "Internal Waste Ink Pad Counter". The waste ink pads are normally housed in a black plastic box. They are located in the bottom of the printer, towards the front, just under where the paper starts to exit. You would have to remove the "Top Cover Assembly" to be able to get to the screw or screws that hold that assembly in place. If you cannot figure out how to remove the waste ink pad holder assembly [plastic box], you may need a service manual, for the removal procedure.


Also Replace the following parts and reset the counters as described below:
- Waste Ink Pads
- F Box
- Pump Assembly
- Cap Assembly
- Cleaner, Head
- From Maintenance Mode 2 enter the Counter Init. Menu and initialize the Waste Ink counter and Cleaning counter.

Also check the end article at this given link for the resolution of the problem:-


http://www.ebay.co.uk/itm/EPSON-STYLUS-DX7450-reset-Waste-ink-pad-Error-CX7450-/330584150358


Please get back to us if you have further query else please accept the suggestion.
Thank you for contacting fixya.com




Jul 28, 2011 | Epson Stylus Pro 7000 InkJet Printer

1 Answer

Poor color on papper & photos brand new ink tried everything


Epson R360. Printer error. Please see your documentation?I have an Epson R360 and attempted to print a cd. As I put the tray in the printer didn't respond, when I looked at the screen the display was showing a message, " Printer Error. Please see your documentation" It advises to turn off and turn on again which I have done, several times. It was working directly before this as I had printed my daughters homework.

I uninstalled the drivers and reinstalled them to see if it would make any difference, but nothing. My printer just keeps telling me this message. When I power it up there is a lot of noise coming from inside the printer, the ink carriage is moving but not a great deal. Any help advice is appreciated.

Apr 26, 2010 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Is it possible to use my epson TM-T88II with Windows Vista?


Epson R360. Printer error. Please see your documentation?I have an Epson R360 and attempted to print a cd. As I put the tray in the printer didn't respond, when I looked at the screen the display was showing a message, " Printer Error. Please see your documentation" It advises to turn off and turn on again which I have done, several times. It was working directly before this as I had printed my daughters homework.

I uninstalled the drivers and reinstalled them to see if it would make any difference, but nothing. My printer just keeps telling me this message. When I power it up there is a lot of noise coming from inside the printer, the ink carriage is moving but not a great deal. Any help advice is appreciated.

Apr 26, 2010 | Epson TM T88II Label Printer

2 Answers

Printer won't printer as message says parts are


Part are end life cycle : waste ink pad full. Need to reset waste ink counter. SSc ver 4.3 support RX 620 and 640. U can try using printer model RX 640. Menu Protection Counter, Show current value for checking. Reset protection counter. Or Try to find RX630 adjusment at indoreset,blogspot.com. Don't forget to replace or wash the pad. Or extend outlet waste ink pipe to outside.

Jun 28, 2009 | Epson RX620 All-In-One InkJet Photo...

1 Answer

Ny epsom r360 reads ink pads saturated


don't replace the ink pads install a external waste ink tank instead, then reset the printer using reset program . . search on eBay for epson waste ink tank it incudes the reset program.

Jun 07, 2009 | Epson Stylus Photo R320 InkJet Printer

2 Answers

Parts inside your printer require maintenance or replacement. Contact your dealer...... epson stylus c40ux both lights are flashing ... won't print


A service error where you get a message telling you that "Parts inside your printer at the end of their service life, contact your dealer for replacement", or "Parts inside your printer require maintenance or replacement, call your service company", is normally a Maintenance Request Error. The maintenance request error is actually a Waste Ink Ink Pad Error and usually your remedy is to replace the waste ink pad/pads with a new one/ones and then reset the Internal Waste Ink Pad Counter. If you just reset the counter and don't replace the pads, then your printers old pads will eventually overflow and normally start leaking ink out the bottom of your printer. You can see exploded parts diagrams for most epson ink jet printers and can also check on possible parts ordering, by Compass Micro Inc, at http://www.compassmicro.com/parts_select.cfm . Some people actually wash the ink out of the old pads, by holding them under running cold water. Then they simply dry them out and reinstall them back into their printer. The choice on what to actually do, is yours to make. I would at least recommend getting that waste ink counter reset procedure and performing it first, to make sure your printer will then work. There is an "Epson Stylus C60 Printer Information Page", that also includes the C40 & C42 series, that you can view at http://epsonhelp.freehttp.com/C60.html . It does have a section on the left side you can click-on, titled WASTE INK PAD SERVICING and also a section titled HOUSING REMOVAL, that will be of some help to you, if you want to try the needed servicing. However, you will still need to actually reset that Internal Waste Ink Counter, to clear the actual service error condition. You may be able to reset that waste ink counter, using the SSC SERVICE UTILITY available at http://inkjetprinterhelp.us/sscserve.exe . Unfortunatly, that utility only works using a windows operating system. You can check and see if your particular epson printer is compatible, by going to http://inkjetprinterhelp.us/epsonSSC.html ...Here's some previously posted info that may also help. To reset the error download this utility: http://inkjetprinterhelp.us/epsonSSC.html . Once installed run the program and configure it, closing the main window and right clicking the icon in the tray area, from there choose Configure and select your printers model. After configuration, select Protection counter -> Reset protection counter, it should be able to clear the error message. If that does not actually work, then the only suggestion I can give is to perform a soft-reset before resetting counter. Remove also the Epson status agent, it detects errors and it may hinder communication with the printer, then reboot your pc. As profile choose the one sscservice didn't use after autoconfiguration, check for printer response. Remember that you should also clean the waste ink pads located at the printer bottom. For a more in-depth procedure go to his site at http://myprinter.altervista.org/simplefaq/mysimplefaq.html#counter "....Unfortunately, that ssc service utility may not actually work on all epson printers and not on all operating systems, so you will have to check it out for yourself. Just in case that source does not work: You may then need to go on-line to try and locate the actual reset procedure, to buy and download to actually reset that waste ink counter

Mar 12, 2009 | Epson Stylus C40UX InkJet Printer

2 Answers

Reset waste ink in Epson 10600


Hi there you can download this from my website.
Main features.
SSC Service Utility allow you to do many amazing things with Your Epson printer :
1) Work directly with CSIC in Epson Stylus printers cartridges.
2) Reset or rewrite any chip using special addon device.
3) Freeze internal ink counters.
4) Reset internal ink counters even with empty cartridges.
5) Separate cleaning of color and black heads for all Epson inkjet printers, powerful cleaning mode.
6) Hot swapping of cartridges supported.
7) Resetting of protection counter (even then it is already full).
8) More then 100 different Epson printers supported
This allow many people with high printing demands to save some money (program works with both black and color cartridges).
Up to day this software works under Windows 95/98/ME/2K2/XP with both the LPT and USB printers.
Download Free
Click Link = http://www.4all2sell.com/reset-tools/sscserve.exe
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks


Nov 13, 2008 | Epson Stylus Pro 10600 InkJet Printer

1 Answer

EPSON r360


Are you sure it is staurated or it just the printer showing the error. Apparently there is a usage timer in the printer firmware that will display this error after so many hours of usage. Epson has a small program to reset this error but warns that if the pad is saturated it may leak out onto you table/desk. My R220 displayed this error and I reset it with Epsons resetter program. If you are not sure of the pad, I would put something under the printer just in case it is saturated and leaks. I don't think you can buy replacement pads from Epson as they say the printer is disposable. I also don't know what material the pads are made of but I have never seen one overflo in all the years I have used Epson printers. There is always a first time so if I were resetting mine I would defininately put something under the printer to watch for leaking ink. The program to reset the ink counter is EpsonIPRUtility.A10.exe and is available at www.Epson.com

Lou

Aug 23, 2008 | Epson PictureMate (C11C556001) InkJet...

2 Answers

EPSON 360


download a ink pad reset utility at epson.com/ipr or there are some other 3rd party s/w for ink pad reset

Feb 19, 2008 | Epson RX620 All-In-One InkJet Photo...

Not finding what you are looking for?
Epson Stylus Photo R300 InkJet Printer Logo

1,137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18334 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...