Question about Panasonic TH-42PHD7UY 42 in. HDTV-Ready Plasma Television

2 Answers

Samsung model a3079dh hdtv 5 blinking lites when pushing power button

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Panasonic Master
  • 8,457 Answers

Tries unplug,replug the tv back like an hour later,the tv know it resetting back to factory setting.The tv now,should work.Not,than the power supply board is dead.That the board,where the power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

Posted on Oct 16, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,126 Answers

Remove the back and check for bulged electrolytic caps on the power supply, or replace power supplu. You can go to www.partstore, for anew supply.

Posted on Oct 16, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony HD Projection TV KDP-57WS550, timer light blinks 5 times and repeats sequence. When power button is pushed sound comes on briefly, no picture, then TV goes off. Please advise.


Mine did this after a power flash. Lights blinking 5 or 6. They blink fast lol. I have sound till tv powers back down. Front yard bond fire? Or any ideas? Thx.
10_18_2015_2_55_53_pm.jpg

Dec 25, 2010 | Sony Grand WEGA KDP-57WS550 57" Rear...

2 Answers

Power light and opc lights blinking green


It can be the power supply is sensing short circuits in the power supply itself or in the backlight inverter board, those are the two areas you need to inspect.
If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:

Please see my basic troubleshooting guide here:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague

Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx

Aug 10, 2010 | Sharp Aquos LC-37G4U 37 in. HD-Ready LCD...

1 Answer

Samsung PPM50H3Q 50 in. HDTV-Ready Plasma will not power on.


could be a power supply failure or a control issue. I would take the unit to a repair shop and see if they can provide you with an estimate. You could try to buy a replacement power board and install it on your own if you are mechanically inclined.
http://www.shopjimmy.com/samsung-bn94-00494u-power-supply-unit.htm

May 05, 2010 | Televison & Video

2 Answers

Panasonic hdtv 1080i power light keeps blinking


Without a model number I can't be to specific, but will most likely require a board replacement regardless of model. 3 blink shutdown is associcated with the 3.3v line on the main board.

Sep 22, 2009 | Televison & Video

2 Answers

No Picture, power button blinks 5 times and just clicks


If you dont have the manual, download it from internet. It should tell you what the blinking light is indicating. My friends tv was blinking 3 lights around power button and the manual I downloaded correctly stated it was the lamp that needed to be replaced. I also found some other interesting info via the internet. There is a way to get into the Service Mode of a Samsung TV. Try doing a Google search for Service Mode for your model... Good Luck. PS the lamp itself was pretty expensive but installing it was not hard to do.

Jun 23, 2008 | Samsung HP-R5072 50 in. Plasma HDTV

1 Answer

TV repare


· Samsung parts for convergance problem
· http://www.partstore.com/Part/Samsung/Samsung/BP9500142E/New.aspx

Nov 22, 2007 | Samsung HCN4226W 42" Rear Projection...

Not finding what you are looking for?
Panasonic TH-42PHD7UY 42 in. HDTV-Ready Plasma Television Logo

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5126 Answers

The Knight
The Knight

Level 3 Expert

74211 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...