Question about Sony KV-32V16 TV

1 Answer

NO VIDEO BUT I DO GET SOUND. do i need a part?

NO VIDEO BUT I DO GET SOUND. do i need a part? What part number?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Sony Master
  • 74,383 Answers

As there is audo is Ok, your TVs all other functions up to horizonatal output section is Ok. The fault lies in the horzontal output section. It may be related to flyback transformer, horzontal drive section and so on. A through cheking is needed. We cannot predict the exact number of components used in your tv. It can only available from the schematic diagram of that tv.
The schematic diagran can be bought from electronic spare part shops. Just note the model number of your tv which is marked at the back side of tv, mark it an go for the schematic diagram. On some TVs, the mumber marked on the schematic and the used one may be different. The most critical is its winding compactability with each other.

Posted on Oct 17, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to connect audio reciver to soundbar


The hook up depends on what the receiver's speaker configuration is : 5.1, 7.1 , 2.1 , and what the sound bar configuration is. You will need to post the receiver make and model number and the sound bar make and model number in order to have your question answered.

Jun 08, 2014 | Audio Players & Recorders

1 Answer

Sound drivers for sempron processor amd


CPUs do not have drivers. They do not contain LAN, Audio, or Video components. These are part of the motherboard they are installed upon. You need to provide the
motherboard manufacturer, model number, and revision number, along with the specific Operating System you are running. We can then help you find the driver(s) you need.

Feb 12, 2014 | AMD Sempron 3100+ 1.8GHz 256k Socket 754...

1 Answer

I have no video output on my yamaha rx-v575


so you have connected hdmi from your xbox to the receiver then from the hdmi monitor out of your receiver which is always number 1 on the hdmi row back to the tv. sound will be there cause you have speakers connected to the receiver. but you need to send a hdmi back to your tv. hope this helps

Jan 21, 2014 | Yamaha Audio Players & Recorders

1 Answer

Sound not in sync with video


sound and video come from the stations possibly their sync is off

Aug 16, 2017 | Emerson Televison & Video

1 Answer

Do not have sound or video drivers. Cannot play both. How to install them? please help. Thank you..


Download the drivers from the HP support center, http://www.compaq.com/cpq-country/cpq_support.html You'll need to enter the Product Number (Mode name) Good luck.

May 21, 2010 | Compaq Presario Notebook

1 Answer

Need to connect video card sound


That's not the right model number of the board,that's the serial number. Go to the asus site for your answer after you find the model,usually by the graphics card slot

Jul 15, 2009 | Computers & Internet

1 Answer

Need sound/video driver


1.right click on mycomputer, then properties,then hardware,then device manager,then double click on
the dispaly adapter, here you will see your motherboard or display adapter model name and number,
2. double click on the soud,video and controller, here you will see your soundcard model name and
number..

if any of the 1 option consists the model name and number is enough to find your rite drivers, check this and post the model name and number.... md_ehsan_1@yahoo.co.in, mohammedehsanullah@gmail.com

Jun 20, 2009 | Computers & Internet

2 Answers

Toshiba dynabook e8/420cme sound drivers, video


Those must be the wrong numbers. Must have model number. Is your Toshiba a Satellite?
Need operating system you are using also.

Nov 18, 2008 | Toshiba (4CH-VOUT) Sound Card

2 Answers

Sound driver


need more information on your hardware. What type of motherboard do you have, is the sound and video integrated, and if not, what is the make and model of your sound and video cards?

May 23, 2008 | Compaq Presario 700 470024-192 Notebook

Not finding what you are looking for?
Televison & Video Logo

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

74383 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...