Question about Computers & Internet

1 Answer

Pc time changes to the old one always

Hello,

my problem is that I set the pc time and date to the correct one, but when reboot the system the time is again the same old one which in incorrect

date is always of year 2002, I change it everytime to the correct one of 2008 but next time when I restart the system it is again the same old of 2002, I m really fed up with this please help me, what should I do?

thank you in advance

bye

Posted by on

  • Anonymous Nov 14, 2008

    i have the same problem and i switched the pc battery
    but the problem still occurs...
    anymore ways to solve it?


  • YOGANAND99 Dec 24, 2008

    I HAVE THE SAME PROBLEM.

    I TRIED CHANGING THE BIOS BATTERY.. NOT FIXED THE PROBLEM

    I TRY REBOOTING.,, NO USE,IT CHANGES TO 2002. ONLY YEAR TIME AND MONTH ARE CORRECT.I INSTALLED WINDOWS XP AGAIN AFTER FORMATTING C DRIVE. EVEN THEN IT IS THE SAME YEAR 2002 PROBLEM.

    PL TELL ME THE SOLUTION.



    YOGANAND99@YAHOO.COM

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

The most likely cause is that your bios battery on your motherboard has gone flat.

Normally bios batteries are 3V button batteries. They are relatively generic. I think the battery size number is CR2032.

These batteries are relatively easy to change, if you are familiar with the insides of your PC.

-Magnon

Posted on Jun 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Date and Time resets every time I shut down my desktop PC.


you know how to get into bios so set the time and when you press esc to move on it will ask for a save settings Y/N change the N to Y and then esc

Sep 10, 2016 | Computers & Internet

1 Answer

This Connection is Untrusted, messaje appears when i try to open my yahoo mail .


Likely to be a date / time setting problem. Please ensure the date and time are correct on your pc. Depending on your operating system this can be changed by clicking on the clock and choosing to change date and time settings.

Sep 25, 2014 | HP Pavilion Computers & Internet

1 Answer

Errer massage - company date detail changed, need to rewrite before proceeding


That sounds like a database error in the software writing.
Reboot to see if the message has gone and the date, time and year are correct. If not try inputting the correct date, time and year and try again.
If it still won't run properly talk to the software assembler as it has run out of date marks.

Jan 01, 2011 | Computers & Internet

1 Answer

Company date details changed what to do to correct the date


Hello!

If your having problem with the time setting in your computer, to fix that---is to change/replace your CMOS Battery located inside your system unit. You can buy cmos battery at the computer shop.

Hope I was able to help.

Jul 31, 2010 | Microsoft Computers & Internet

1 Answer

System boots up but i need to set system


Click Start, point to All Programs, point to Accessories, point to System Tools, and then click System Restore.
2.
On the Welcome screen, click Restore my computer to an earlier time, and then click Next.
3.
On the Select a Restore Point page, select the date from the calendar that shows the point you'd like to restore to, as shown in Figure 2, and then click Next.
sysrest2.jpg
Figure 2
4.
On the Confirm Restore Point Selection page, verify that the correct restore point is chosen, and then close any open programs.
5.
Click Next if you are ready to proceed or click Back to change the restore point.
6.
The computer will shut down automatically and reboot. On reboot, you'll see the Restoration Complete page, and then click OK.

Jun 11, 2010 | HP Vectra Xe320 PC Desktop

1 Answer

When powering up the computer I sometimes get an error code 271 check date and time.


If the pc boots - in the lower right systems tray - there is time displayed - - change that time to the correct time AND day - -if the pc doesn't boot - - DO a reboot - and as right after you turn the machine on - tap DELETE -- don't worry it won't delete anything - - -once you do that [ it may take 2-3 even 4 or 5 tries - you will end up in the BIOS - see the time? Top one - first page - set the time to the correct time and DATE -- then select - save changes - reboot and you will good to go.
e3da60c.jpg

Apr 10, 2010 | E-Machines eMachines Desktop PC

1 Answer

Cd / dvd do not show on device manager.


Hello,

A good sign that your battery needs changing - you are always having to set the time and date it can affect the BIOS setting but rarely.
To get to your BIOS setup, reboot your computer and press F2 while it is powering on. You should be able to see what devices are being "seen" by your system.


Good Luck
C2Solutions

Sep 04, 2009 | Dell Dimension 8400 PC Desktop

1 Answer

Bios date and time problem


You need to replace the cmos battery in your computer. Theu are usually Cr2032 batteries which you should be able to pick up for about £1.

unplug your computer and open the case.
When you look at the motherboard you should be able to easily locate the cmos battery cliped onto the mobo.
Take the old battery out and insert the new one.
put the case back on and plug the pc into the mains again.
You will need to re-enter the date etc the next time you boot up, but the settings should be retained after that.

Ian

Mar 09, 2009 | Dell OPTIPLEX GX150 PIII-1.0GHz 256MB 40GB...

2 Answers

My computer went back to older clock date as 1610


try starting your computer in safe mode and see if you can do anything productive there, like scanning for viruses or spyware. also check if you can do the following:
CTRL+ALT+DEL (open task manager)
goto Start>Run>Regedit (open registry editor)
goto Start>Control Panel>Display>Properties (change display settings)
right click on clock at tray and change the current time to correct settings

if you cannot do any of these activities, then your computer may probably been compromised by a virus or malware.

Jan 02, 2008 | Dell OPTIPLEX GX150 PIII-1.0GHz 256MB 40GB...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

98868 Answers

David Payne
David Payne

Level 3 Expert

14086 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...