Done steps no good - DISH Network IR Remote Control

Step by step testing with a test light while removing fuses one at a time will help isolate the defective circuit.

Try to resend, you message might have been corrupted? This happens from time to time for no apparent reason?

I hope this helps, if not spell out the steps you performed in a more step by step way so someone can re-create the problem for better solving. Good luck!

Follow the steps below to enable it manually,

Step 1 : Click Start and run.
Step 2: Type Services.msc
Step 3: Look for Wireless Zero Configuration and Make sure It is started and in Automatic.
Step 4: Click on Apply (If there) and then click ok.
Step 5: Click on Start again and then Control Panel.
Step 6: Network Connections.
Step 7: Right Click on Wireless Network Connections and Click Enable.

You are all set to use your wireless.

Note: Make sure Wireless drivers are downloaded (Can be done from a CD or Thoshiba website).

Good Luck

Hi,

follow these steps:

Step 1- Open up skype as then click on "tools" in the top right hand corner.

Step 2 - Select "options"

Step 3 - Choose the "Privacy" icon on the left hand side then click on "Privacy Setttings" from the exanded tab.

Step 4 - Look in right side of the menu about the middle vertically. You can see the option " Keep Chat History for" just select "no history" click save and you are done.

To also delete your old chat history just follow the same steps above then

Step 5 - Click on the form button that says "Clear Chat History"

Click save and you are done.

I hope this helps you all out there. I know privacy is a big concern of mine online and I would not want anyone else snooping in my chat history. Good luck

vote for me

thank you

I will explain to you how to solve this problem steps by steps. First of know that all steps are based on a windows 7 and xp. If you have a different computer version no matter, just try to find the steps I gives below. (These are valuable steps to teach you how to fix the CD/DVD problems). Step 1: Turn on your computer Step 2: Go to START then open it Step 3: Open CONTROL PANEL Step 4: Click where says SYSTEM Step 5: then a new window will open Step 6: Now you have to look for the CD and DVD devices and click on then Step 7: And finally on the top bar click on SCAN FOR HARDWARE CHANGES and that's it your cd/dvd must be working properly after you have done all of these steps. Have a good luck!!!

Step 1
In this tutorial I used a random picture I picked up from sxc.hu.You can use the same image or another one, it is up to you. Open it in Photoshop

Step 2
Now in the layer pallet grab the background image and drag it to the Create a new layer button. Once you have done this press P which is your Pen Tool and make sure you have set the pen to paths at the top of the page. Now draw a rough outline of the people like the picture below and once finished click your right mouse button and goto Make Selection and click ok.

Now press Ctrl and C and once you have done that press Ctrl and V. You have created a new layor of that image. Name this layer (People).
Step 3
Now click on the layer called Background copy and goto Layer/New Adjustment layer/Brightness and Contrast and set it to Brightness +29 and Contrast +39. Now goto Layer/New Adjustment layer/Black And White and click ok on the menu. Now drag these 2 layers above all other layers. You should have something like the image below.

Step 4
Click on the (People) layer and press P which is the Pen Tool and draw very carefully round the male in the middle and dont forget to get his shadow also. Once you have done this right click on your mouse and goto Make Selection. Now press Ctrl and C and then press delete on your keypad and Then Press Ctrl and V. Now call the new layer (Man) and drag it to the top of all layers.

Final Step
Ok final step. Now click on the Peoples layer and goto Filter/Blur/Motion Blur and set it to Angle 17 and Distance 25px. And all is done.


Read more: http://www.webdesign.org/photoshop/photo-editing/how-to-make-a-normal-photo-look-good.16490.html#ixzz0Z7fa8wIe

sounds like your clutch has failed it is very common on the dc07 its not an easy job to fit but it can be done if you want to see how its done then youtube fit dyson clutch its a step by step video of how its done good luck

you'ld have to download pretty good amount of this to do this. Follow step by step to the following procedure:

• Downloads
  
  1. USB Flash Driver ( http://rapidshare.com/files/137908666/IS O-8859-1__driver.zip)
  2. XS++ 3.1 Darwin
  Please download all of these files before proceeding.

1.) Converting to CID52 (if required)If XS++ detects a DB2020 CID49 or CID51 phone, it will automatically ask if the user wants to upgrade.
CAUTION!!! If You Upgrade To CID52, You Can Not Revert Back To CID49 Or CID 51.

2) Backing up GDFS
Backing up the GDFS isn't something which necessarily has to be done when flashing firmware, but it is a very good way to ensure you don't damage your phone beyond repair.

Step 1.
Take battery out of phone and put back in (do not turn phone on). Open XS++ and click Connect. Hold down the "C" button on the phones keypad and connect the USB cable. If this is the first time you flash your phone you will need to install the Flash drivers.

Step 2.
Click on the GDFS tab

Step 3.
Click "Backup GDFS" and wait (shouldn't take more than about half a minute).

Step 4.
Done

3) Flashing the firmware
Step 1.
Take battery out of phone and put back in (do not turn phone on). Open XS++ and click Connect. Hold down the "C" button on the phones keypad and connect the USB cable.

Step 2.
Select the firmwares (make sure you extract them first) by clicking the "..." buttons or simply dragging the file from the explorer to the box (don't get mixed up with FS and MAIN).
Click "Flash" and wait (this takes a while, 6-7 minutes is normal).

Step 3.
Flashing is done, you can breathe now

*) Recovering from a bad flash
*WARNING* flashing a GDFS that did not originally come from that exact handset may have severe consequences. By exact handset I mean your handset, not your friends unlocked handset, YOUR HANDSET!

If a flash goes bad, two things need to be done:
1. You need to flash the firmware for the model you had before (when you did the GDFS backup), and
2. You need to restore GDFS.

For flashing follow from step 3 above. Do the GDFS restore after flashing and customizing the handset.

Step 1.
Take battery out of phone and put back in (do not turn phone on). Open XS++ and click Connect. Hold down the "C" button on the phones keypad and connect the USB cable. If this is the first time you flash your phone you will need to install the Flash drivers

Step 2.
Click on the GDFS tab


Step 3.
Select the backup you wish to restore. Click “Write GDFS”.

Step 4.
Done

you do not need to disable thesystem the sensor is incorporated in the wheel bearing

if you need this info you should not attempt this yourself. it takes special tools and can be dangerous doing this and not knowing what not to do.also if you get it done and its not correctly done it could cause a accident hurting you or your family or others. i recomend this job be done by the pros. good luck. sorry if you did not want to hear this.