- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You can't display the date and time on the pictures of the digital cameras. The date and time is stored on the file information. You will have to get some software to do this. I am using Gena photo stamper to do this task.
Try plugging the camera into the computer and take all the pictures off of it, then unplug it and go into the camera menu. Once there, select "format memory card". WARNING: this will erase all pictures currently on the camera, so be sure to take them off it first.
There is possible two things that are preventing you from using the memory card first there is a small switch on the side of the SD card I'm providing a diagram to show you. Make sure the little switch is in the correct position.
Next and most probably the main thing is the memory card needs to be formatted to the camera it is being used in. Formatting some times called initializing prepares the memory card surface to receive camera data and picture files. Formatting should be done each time a new memory card is going to be used in a camera and after each time the picture files are downloaded to the computer.
If you have been using this card and only deleting the picture files what has happened is that there is a small file left on the card each time you delete after a time these little files clog the memory card to a point the card can not receive any new data. Formatting is the way to clear off all this impertinent data and start fresh.