Question about D-Link DIR-628 Wireless Router

1 Answer

WHY I CAN'T GET THE SIGNAL AFTER ADDID A PASSWORD, i HAD IT BEFORE WHEN IT WAS UNSECURE...

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,281 Answers

Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then click on wireless ->wireless security ->wep security. Note down the password it is your password to connect wifi. . Let me know if you need further assistance. Thanks for using FixYa.

Posted on Oct 16, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It is asking for an access code to an access point . What is that?


Wireless networks can be secure or unsecure. Anyone can connect to an unsecure site simply by searching for available sites and choosing an unsecure one to connect to. There are inherit risks associarted with unsecure sites and you should NEVER do any financial or highly personal transactions on an unsecure network. Secure networks require a password (access code) to complete connection. This code is provided by the owner/administrator of the network. If you are allowed to connect to such a network, you should already be aware of the code. Otherwise you are basically not invited to the party.

Nov 15, 2016 | Computers & Internet

Tip

How do I make my iPod Touch Connect to an Unsecure Network


<p>Unsecured wireless Internet networks are available in many cafes and public spaces. An unsecured network is a wireless Internet connection that does not require a password. Use your iPod Touch Wi-Fi capability to connect to these networks and the Internet. Although excellent for surfing and email, avoid carrying out banking or financial information into an unsecured network, because there is a possibility that the signal is intercepted. <br /> <p><br /> <p>1. Open the Settings menu of your iPod Touch. It is the gray gear icon on the home screen. <br /> <p><br /> <p>2. Tap "WiFi" and move it to "On" if needed. If your Wi-Fi is already activated, you will see a pop-up asking if you have the unsecured network. Some companies, like Starbucks, have a "Log In" screen appears automatically. <br /> <p><br /> <p>3. Click "Yes" or "Join" for the network to automatically connect when prompted. The text may vary depending on the company, and you may need to read and agree to the terms and conditions statement. If no login screen appears, wait until you play for scanning available Wi-Fi signals. The list is displayed. <br /> <p><br /> <p>4. Select the network name you want to join the list. An unsecured network has a password, so you will not be asked to give. <br /> <p><br /> <p>5. Click on "automatic network in the future" when asked if you want to do. <br /> <p><br /> <p>6. Wait until the light of the Wi-Fi indicator in the upper left corner of the touch. This indicates that you are online and ready to ride. <br />

on Aug 09, 2011 | Apple iPod touch

1 Answer

How can i block intruder?


If the Wireless device isn't secured, Secure it. Set up a SSID and Security Key(password). If it is secured, change the Security Key(password), Use the Linksys Setup Manual found here: http://support.linksys.com/en-us/support/routers/WRT120N Always Secure your Wireless. If unsecure your signal, at best, COULD be use by anyone to connect to the web using your resources and slowing down your activity. At worst, use your signal for nefarious purposes causing you a great deal of Pain and Heartache, and MAYBE the FBI knocking at your door.

Mar 20, 2013 | Linksys WRT120N Router

1 Answer

If i get a signel fom some one else can i still get on line to play xbox with cabel


if youre getting any wireless signal you can, but only connect if its unsecured or if you know the password.

Nov 24, 2010 | Microsoft Xbox® 360 Core System Console

1 Answer

Vista attempts to connect with the router "unsecured network"


Hi Friend,

If the security is enabled on your computer then on router the security has to be enabled.

Please follow the steps:

1.Open the router page (192.168.0.1)
2.Enter the username and password
3.ClickWireless settings and fill the section as mention

Name(SSID)-As per your choice
Region-As per your location
Channel-6
Mode-Auto

Security options
WEP

Security Encryption
Authentication-Automatic
Encryption strength-64bit

Security Encryption key
Key1-type a 10 digit password

Click Apply. Turn off the router for 30 seconds and turn it on again.

I hope this will resolve the issue.

Regards
Chiranjeet

May 22, 2010 | NetGear WGT624 Wireless Router

1 Answer

How to remove a network/signal?


Connect to the unsecure network, either directly with a cable, or connect via wifi. Once you are connected, open your web browser and go to:

http://192.168.2.1

There should be no password, just hit enter, then you can change the SSID and/or channel, etc.

I pulled the instructions from Belkin support:
http://en-us-support.belkin.com/app/answers/detail/a_id/1567


Good Luck!
EJ

Jan 26, 2010 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

Cannot connect to new wi-fi signals


Try removing all past connections , go to control panel , delete all your old settings and start new.

Apr 11, 2009 | D-Link RangeBooster G WBR-2310 Wireless...

1 Answer

I've got a Linsys Wireless G 2.4, 54 Mbps, model WRT54G. I live a a house where other houses a a fair distance away. The strongest signal from a lynksys now shows it as secure whreas before it was...


Factory reset the router using the small reset whole on the back then go into your browser, type into the address bar 192.168.1.1 and user name and password box will show up, from memeory leave the username blank and the default password will be admin, enter your connection settings - away you go.

manual here if it is one of the blue routers, there is a newer silver model: http://www.linksys.com/servlet/Satellite?blobcol=urldata&blobheadername1=Content-Type&blobheadername2=Content-Disposition&blobheadervalue1=application%2Fpdf&blobheadervalue2=inline%3B+filename%3DWRT54G_UG_WEB_20070529.pdf&blobkey=id&blobtable=MungoBlobs&blobwhere=1193775701174&ssbinary=true&lid=0703200349B05

Jul 06, 2008 | Computers & Internet

1 Answer

Wireless router sends unsecured signal


It could mean that your WAP or WEP is off in your router, to turn it on you have to set a password key for the WAP/WEP. It could be set by accessing your router's configuration by typing your routers IP(usually 192.168.1.1 or 192.168.0.1) in your internet browser. You will be then prompted for the username and password, for the IP, username and password refer to your routers manual or buy using the CD that comes with the router.

Jun 18, 2008 | Computers & Internet

1 Answer

Username and password


hello!

1. are you referring to the router username and password or the wireless security password ?

2. what is the exact model number of your router?

3. where did you get the message to put in the username and password in an unsecure manner?



-- the default router username is admin with no password
-- the wireless security will depends on what security settings that are configured on the router
--

May 04, 2008 | Linksys BEFSR41 Cable/DSL Router W/4 Port...

Not finding what you are looking for?
D-Link DIR-628 Wireless Router Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...