- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sounds like you might have corrupted your programming. See if you can do an update online by going to the EasyShare website and searching for updates for your model. You maybe able to download and reinstall the software.
you have problem in lens unit that's why all your picture has a lines or stripes and reddish. If you can open your camera and check the lens unit try to clean and adjust the shutter, it should be the shutter move smoothly.also check the cable if not broken and connected properly.
I have the same problem with my Z612 and seemed to have found a solution that works for me. I discovered that if I turn the dial to the Favorites mode then back to Auto mode it resets the shutter/CCD and begins to work again. Obviously your mileage will vary but I hope this solution works for you as well.
Hi if you had not chosen any fader effect then problem is with internal circuit. the blanking lines are visible kindly first chek with fadder effect in setting if it is normal then you need technical expert to physically chek the circuit.