Question about Canon iRC3100 Printer
The Waste toner is full, the copier will not work until you have emptied it or replaced it.
The waste toner is in the front, open front cover and the white bottle in the middle is the waste toner cartridge. Remove the black screw, and empty or replace the cartridge.
If you empty it make sure to clean the see-trough plastic on the top of it so that the sensor sees that it is empty.
Posted on Oct 16, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: canon iRC3100
The error is related to the waste toner bottle being full, empty the bottle and make sure any sensors around the bottle and the clear panels on the bottle are clean of toner
Posted on Jun 18, 2008
That means that you have ITB waste toner full error. Clean the waste toner container.
It is located behind front door, right from toner slots, you need screwdriver to unscrew one screw, and remove plastic cover above waste toner container.
When you vacume or dump waste toner, wash it very well, and dry it.
Posted on Jun 15, 2010
Testimonial: "thanks that was very helpfull"
Tips for a great answer:
505 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: