Question about Sony Ericsson K800i Cellular Phone
My K800i was working perfectly fine. I was putting in a new sim card and then i took it out because it wasn't activated. i returned the original sim to the phone and it wouldn't turn on. I have cleaned the battery terminals and checked my battery on a friends phone. There must be power there because every time i press the "on/off" button, there is a red light that flashes where the infrared patch; next to the camera button on the side of the phone.
The phone software is corrupted you need to reinstall the phone software if your phone is within warranty please give to service center and or get it done on the local phone service center .......................
Posted on Jun 03, 2008
Tips for a great answer:
Obtain the unlock code for your K800i if the phone is locked. You can
get the code from an unlocking service, or from the carrier that originally
sold the phone.
Turn off the K800i and turn the phone over.
Remove the battery cover by sliding it toward the bottom of the phone.
Lift the battery from the bottom and set the battery cover and battery aside.
Remove the old SIM card by sliding it out from under the metal clip. If
you have an unlocked K800i, all you need to do is insert the SIM card from your
new carrier. Otherwise, leave the SIM out and reinstall the battery and battery
Turn the phone on and wait for it to boot up.
Press left on the navigation pad and press "*" twice, then
press the left arrow again. The phone will display "Personalize with
Type the unlock code and wait for the phone to reboot.
Turn the phone off and insert the new SIM card.
Jul 22, 2012 | Sony Ericsson K800i Cellular Phone
Apr 03, 2009 | Motorola Mobility RAZR V3
Dec 30, 2008 | Sony Ericsson K800i Cellular Phone
Aug 27, 2007 | Sony Ericsson K800i Cellular Phone
Aug 21, 2007 | Motorola Mobility SLVR L7 Cellular Phone
33 people viewed this question
Usually answered in minutes!