- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Tv screen flashes pictures rapidly only few sec.than pictures died.Have sound left only?Yes,than those 2 long boards call the LCD inverter boards are dead.These 2 long LCD inverter boards help the LCD screen panel to have a backlight to produced a picture.Tries websites like Shopjimmy.com,Ebay.com to buy those refurbishes 2 long LCD inverter boards for the replacement.
If you have the input connected to the HDMi TV, there is a chance of picture getting flickered, if the resolution send by the device and the TV is incompatible....
If the receiver is set to send the signal at the frequency of 720p and the TV is set to operate at 1080p or vice verse then the picture would flicker..
In the settings in the TV,, try setting it to auto rather than 720p or 1080p, this should solve your issue..
If you were not connecting using the HDMi and if you use other, please leave me the details regarding the cable you use as a comment and ill respond you for the comment.. RnjVINODKUMAR
1. Connect PS3 to your TV
2. Select the Correct HDMI input on your TV
3. Press and hold the [power] button on the PS3
4. perform setup.
These are the steps to setup the video output for the PS3, It is possible that it is set to a resolution that your TV does not support.
If this doesn't work, you may want to contact Sanyo to ask if they have some protection circuit for the HDMI input. Some manufactures TV's will deactivate(turn OFF) the HDMI input under certain conditions. Unplugging the TV or some other procedure usually turns it back ON.
Emilie, I have the same issue. I have to press the input on the TV to go through all of the inputs and whenI get back to HDMI 1 it usually goes back to nomral - but sometimes that doesnt even work. I tried calling support, but waited 40 minutes and hung up.