Question about Compaq Presario 1200XL104 Notebook

1 Answer

How do i getthe key lock of on a comcaq p/n:5187-5023 s/n:cd65117648 model no:kb-0311 power rating:5v

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Compaq Expert
  • 1,325 Answers

Hi

i need the S/N of the computer (found on back) starts with S/N

Posted on Oct 16, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to charge


"The standard USB power rating will be 5V 500mA which means that a device connected will receive 5V and be able to draw a maximum of 500mA (milliamp hours)."I assume you changed mAh to mA in the sentence above, but neglected to change the description to milliamps vs. milliamp hours (which refers to battery capacity)


post your model and manufacture for solve your problem

May 20, 2012 | Cell Phones

1 Answer

I have comcaq armada model 1500C laptop, when I start power it on the screen displayed power-on password. I forgot what is the password, can you help. Thanks jane...


You have a CMOS password on your computer. If you for some reason do remember the password and get into it, then please take the CMOS password off. It only causes heartache.

here's a guide on how to remove a laptop CMOS password:

http://www.computerhope.com/issues/ch001302.htm

Good luck.

Apr 06, 2011 | Compaq Computers & Internet

1 Answer

I want to convert this power supply for use with a battery charger for model aircraft. I need to know the color codes for the wires and also the pinout and which wire is the power on.


Pin Name Color Description
1 3.3V Orange +3.3 VDC
2 3.3V Orange +3.3 VDC
3 COM Black Ground
4 5V Red +5 VDC
5 COM Black Ground
6 5V Red +5 VDC
7 COM Black Ground
8 PWR_OK Gray Power Ok (is a status signal generated by the power supply to notify the computer that the DC operating voltages are within the ranges required for proper computer operation)
9 5VSB Purple +5 VDC Standby Voltage (max 10mA)
10 12V Yellow +12 VDC
11 3.3V Orange +3.3 VDC
12 -12V Blue -12 VDC
13 COM Black Ground
14 /PS_ON Green Power Supply On (active low). Short this pin to GND to switch power supply ON, disconnect from GND to switch OFF.
15 COM Black Ground
16 COM Black Ground
17 COM Black Ground
18 -5V White -5 VDC
19 5V Red +5 VDC
20 5V Red +5 VDC

/PSON activated by pressing and releasing the power button while the power supply is in standby mode. Activating /PSON connects the power supply's /PSON input to ground, thereby switching the power supply to full-on condition.
18 AWG is recommended for all wires except pin 11, which should be 22 AWG. For 300W configurations 16 AWG is recommended.
There are several ATX variants.
Hope this helps.
If this helps you resolve your problem, please
consider giving me a rating of 4.It will help me as well. Thank you.

Nov 26, 2010 | Compaq (243890-001) 250-Watt Power Supply

1 Answer

How can i download sims 2 pets for fre in my pc?


this is the latest one sims 3 choose just one server and donwload the game


Download

Code: http://sharingmatrix.com/file/7058331/vty-0311.part01.rar
http://sharingmatrix.com/file/7058333/vty-0311.part02.rar
http://sharingmatrix.com/file/7058335/vty-0311.part03.rar
http://sharingmatrix.com/file/7058337/vty-0311.part04.rar
http://sharingmatrix.com/file/7058339/vty-0311.part05.rar
http://sharingmatrix.com/file/7062117/vty-0311.part06.rar
http://sharingmatrix.com/file/7062119/vty-0311.part07.rar
http://sharingmatrix.com/file/7062121/vty-0311.part08.rar
http://sharingmatrix.com/file/7062123/vty-0311.part09.rar
http://sharingmatrix.com/file/7062125/vty-0311.part10.rar
http://sharingmatrix.com/file/7063243/vty-0311.part11.rar
http://sharingmatrix.com/file/7063245/vty-0311.part12.rar
OR

Code:http://www.fileserve.com/file/8j4fgdv
http://www.fileserve.com/file/564MapQ
http://www.fileserve.com/file/5s4Ap6p
http://www.fileserve.com/file/AYEfQMa
http://www.fileserve.com/file/8BBEbKg
http://www.fileserve.com/file/RjDRfHC
http://www.fileserve.com/file/h5fhAeU
http://www.fileserve.com/file/CaX4v8P
http://www.fileserve.com/file/45RuGF4
http://www.fileserve.com/file/3hbzK4A
http://www.fileserve.com/file/NDC5cy6
http://www.fileserve.com/file/bKbWWqV

DONT FORGET TO RATE

Jun 09, 2010 | EA - Electronic Arts The Sims 2: Pets

1 Answer

I would like to download sims 3 the fastest way possible but can't find how!


well this is your lucky day just choose one server than download the links bellow :


Download

Code: http://sharingmatrix.com/file/7058331/vty-0311.part01.rar
http://sharingmatrix.com/file/7058333/vty-0311.part02.rar
http://sharingmatrix.com/file/7058335/vty-0311.part03.rar
http://sharingmatrix.com/file/7058337/vty-0311.part04.rar
http://sharingmatrix.com/file/7058339/vty-0311.part05.rar
http://sharingmatrix.com/file/7062117/vty-0311.part06.rar
http://sharingmatrix.com/file/7062119/vty-0311.part07.rar
http://sharingmatrix.com/file/7062121/vty-0311.part08.rar
http://sharingmatrix.com/file/7062123/vty-0311.part09.rar
http://sharingmatrix.com/file/7062125/vty-0311.part10.rar
http://sharingmatrix.com/file/7063243/vty-0311.part11.rar
http://sharingmatrix.com/file/7063245/vty-0311.part12.rar
OR

Code:http://www.fileserve.com/file/8j4fgdv
http://www.fileserve.com/file/564MapQ
http://www.fileserve.com/file/5s4Ap6p
http://www.fileserve.com/file/AYEfQMa
http://www.fileserve.com/file/8BBEbKg
http://www.fileserve.com/file/RjDRfHC
http://www.fileserve.com/file/h5fhAeU
http://www.fileserve.com/file/CaX4v8P
http://www.fileserve.com/file/45RuGF4
http://www.fileserve.com/file/3hbzK4A
http://www.fileserve.com/file/NDC5cy6
http://www.fileserve.com/file/bKbWWqV
there is no rar password
dont forget to rate :)

Jun 07, 2010 | EA - Electronic Arts The Sims 2: Pets

2 Answers

Need to know "no bus" indicator light on instrument panel....


"No Bus" means the data cable going to the (PCM) computer is unplugged, or the PCM has failed and not able to read the information it is being given.
Sometimes just jiggling the PCM causes the ODO "NO BUS" to come on.
Sometimes a bad crank or cam sensor can cause this as well.

Here is the OFFICIAL checklist for the "NO BUS" condition....

Vehicle: 1998 - 1999 Dodge Durango 3.9L
2000 - 2001 Dodge Durango 4.7L
1998 - 2000 Dodge Durango 5.2L
1998 - 2001 Dodge Durango 5.9L



Symptom: Engine will not start. Gauges are inoperative. No BUS message displayed on odometer.



System: Body/Chassis Electrical, Emissions/PCM/Fuel, Engine Electrical



Codes: N/A



Problem 1 of 6: The 5v power supply from the Powertrain Control Module (PCM) is shorted due to a shorted Crankshaft Position (CKP) Sensor.



Test & Fix: If the 5v power supply circuit is shorted to ground, the CCD bus is unable to transmit messages and the Powertrain Control Module (PCM) appears to be "dead". The PCM is not damaged when the 5v power supply gets shorted to ground, but does need to be reset by turning the key off for 10 second after the short is removed. Using a DVOM or labscope, measure the voltage on the 5v reference wire at the Throttle Position Sensor (TPS) or Manifold Absolute Pressure (MAP) sensor. If 5v is not present, unplug the Crankshaft Position (CKP) Sensor. Turn the key off for 10 seconds. Turn the key on and measure the voltage on the 5v power supply circuit. If the voltage is now 5v, replace the CKP sensor.



Problem 2 of 6: The 5v power supply from the Powertrain Control Module (PCM) is shorted due to a shorted Camshaft Position (CMP) Sensor.



Test & Fix: If the 5v power supply circuit is shorted to ground, the CCD bus is unable to transmit messages and the Powertrain Control Module (PCM) appears to be "dead". The PCM is not damaged when the 5v power supply gets shorted to ground, but does need to be reset by turning the key off for 10 second after the short is removed. Using a DVOM or labscope, measure the voltage on the 5v reference wire at the Throttle Position Sensor (TPS) or Manifold Absolute Pressure (MAP) Sensor. If 5v is not present, unplug the Camshaft Position (CMP) Sensor. Turn the key off for 10 seconds. Turn the key on and measure the voltage on the 5v power supply circuit. If the voltage is now 5v, replace the CMP sensor.



Problem 3 of 6: The 5v power supply from the Powertrain Control Module (PCM) is shorted due to a shorted Manifold Absolute Pressure (MAP) Sensor.



Test & Fix: If the 5v power supply circuit is shorted to ground, the CCD bus is unable to transmit messages and the Powertrain Control Module (PCM) appears to be "dead". The PCM is not damaged when the 5v power supply gets shorted to ground, but does need to be reset by turning the key off for 10 second after the short is removed. Using a DVOM or labscope, measure the voltage on the 5v reference wire (5v power supply) at the Throttle Position Sensor (TPS) or Manifold Absolute Pressure (MAP) Sensor. If 5v is not present, unplug the MAP sensor. Turn the key off for 10 seconds. Turn the key on and measure the voltage on the 5v power supply circuit. If the voltage is now 5v, replace the MAP sensor.



Problem 4 of 6: The 5v power supply from the Powertrain Control Module (PCM) is shorted due to a shorted Throttle Position Sensor (TPS).



Test & Fix: If the 5v power supply circuit is shorted to ground, the CCD bus is unable to transmit messages and the Powertrain Control Module (PCM) appears to be "dead". The PCM is not damaged when the 5v power supply gets shorted to ground, but does need to be reset by turning the key off for 10 second after the short is removed. Using a DVOM or labscope, measure the voltage on the 5v reference wire (5 volt power supply) at the Throttle Position Sensor (TPS) or Manifold Absolute Pressure (MAP) Sensor. If 5v is not present, unplug the TPS. Turn the key off for 10 seconds. Turn the key on and measure the voltage on the 5v power supply circuit. If the voltage is now 5v, replace the TPS.



Problem 5 of 6: The 5v power supply from the Powertrain Control Module (PCM) is shorted due to a shorted wire.



Test & Fix: If the 5v power supply circuit is shorted to ground, the CCD bus is unable to transmit messages and the Powertrain Control Module (PCM) appears to be "dead". The PCM is not damaged when the 5v power supply gets shorted to ground, but does need to be reset by turning the key off for 10 second after the short is removed. Using a DVOM or labscope, measure the voltage on the 5v reference wire at the throttle position sensor (TPS) or manifold absolute pressure (MAP) sensor. If 5v is not present, unplug all sensors that are connected to the 5v power supply and disconnect the PCM. Check if either 5v power supply circuit is shorted to ground using a DVOM. If the circuit is found to be shorted to ground, repair the wire and the cause of the short.



Problem 6 of 6: The 5v power supply from the Powertrain Control Module (PCM) is shorted due to a shorted Governor Pressure Sensor.



Test & Fix: If the 5v power supply circuit is shorted to ground, the CCD bus is unable to transmit messages and the Powertrain Control Module (PCM) appears to be "dead". The PCM is not damaged when the 5v power supply gets shorted to ground, but does need to be reset by turning the key off for 10 second after the short is removed. Using a DVOM or labscope, measure the voltage on the 5v reference wire at the Throttle Position Sensor (TPS) or Manifold Absolute Pressure (MAP) Sensor. If 5v is not present, unplug the large round connector on the driver's side of the transmission. Turn the key off for 10 seconds. Turn the key on and measure the voltage on the 5v power supply circuit. If the voltage is now 5v, remove the transmission pan and check for shorted wiring inside the transmission. If the wiring is OK, replace the Governor Pressure Sensor.


Many times the PCM simply overheats - and changing it will stop the problem.


Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

May 13, 2009 | 1999 Dodge Durango

2 Answers

2000 Ram 1500 4x4 "no bus"


All the modules are connected together to communicate with each other via the PCI bus. It is possible that one of the modules is pulling the bus down. If the vehicle won't start it could be any one of the modules. It will be a process of elimination to find the faulty one by disconnecting them one at a time.

Apr 22, 2009 | 1998 Dodge Ram 1500 4WD

2 Answers

ASUS P5GL-MX performance


Install new power system!
Thanks,]
Melcom Smit

Oct 04, 2008 | Computers & Internet

2 Answers

Number lock key not work


Hello,

Many times repeatedly tapping on the Scroll Lock key will cause a keyboard to reset itself so the number lock works again.

Regards,
Worldvet

Please note: our email server that lets we Experts know of your comments in solutions is down right now, so that if you have a further need for assistance, please just ask and I will personally be checking back on this page to see if you do have a further question.

Jun 05, 2008 | Computers & Internet

Not finding what you are looking for?
Compaq Presario 1200XL104 Notebook Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Compaq Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

Abhinandan  Patil
Abhinandan Patil

Level 3 Expert

568 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Compaq Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...