Question about Linksys WRT120N Router

1 Answer

I reser my router but they ni restore default settings

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Since you already reset the router you can run the installation disk again and re-configure it

>>but if the cd will not work you can access the setup page of the linksys router.
just open an internet browser and type 192.168.1.1 as a default gateway
and if it will ask for a username and a password just leave the username blank and put admin for the password

>>and you can configure the router there

>>hope it helps..

Posted on Oct 16, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I restore my router to the factory setting? I have no Wi-Fi service.


Restoring the Default Configuration and Password
  • Use the restore factory settings button on the rear panel of the router. Use this method for cases when the administration password or IP address is not known.
  • This is how to restore the factory default configuration settings that reset the router's user name to admin, the password to password, and the IP address to 192.168.1.1.
  • To use the restore settings button:
    1. Locate the restore factory settings button on the rear panel of the router.

    2. Use a sharp object such as a pen or a paper clip to press and hold the restore factory settings button for about 5 seconds, until the Power light begins to blink.

    3. Release the restore factory settings button, and wait for the router to restart, and for the Power light to stop blinking and become solid green.

    4. The factory default settings will be restored so that you can access the router from your Web browser using the factory defaults.

      Then you can go through the setup procedures to setup your wireless

      Here is the link to the documentation so you can set it up again

    WNR2000 Manual Table of Contents

    hope it works for you

    Sep 10, 2014 | NetGear WNR2000 Wireless Router

    1 Answer

    HOW TO UNLOCK MY WIRELESS ROUTER TL-WR740N


    You should restore the Factory Defaults to get full access to the router. Be aware that all custom settings will be undone with this procedure.
    This can be achieved this way:

    * Choose menu "System Tools ? Factory Defaults", and you can restore the configurations of the Router to factory defaults on the following screen
    * Click the Restore button to reset all configuration settings to their default values.
    * The default User Name: admin
    * The default Password: admin
    * The default IP Address: 192.168.1.1

    Aug 23, 2011 | AGPtek TPLink TLWR740N IEEE 80211bgn...

    1 Answer

    I cannot connect to the internet using my netgear n150 wireless router. The internet light is orange but the modem is working fine and I can connect to the router itself.


    When the router is turned on, the Internet light turns amber for about 20 seconds and then turns green. If the light does not turn green, the router has a problem. If the Internet light is still amber 1 minute after turning on power to the router: a. The Internet is not accessible. Confirm that you have the correct internet setting. b. Clear the router's configuration to factory defaults. This will set the router's IP address to 192.168.1.1. c. Turn the power off and back on to see if the router recovers. If its still not working, reset to factory defaults. You can restore the factory default configuration settings that reset the router's user name to admin, the password to password, and the IP address to 192.168.1.1. To restore the factory default configuration settings: 1. Use a sharp object such as a pen or a paper clip to press and hold the restore factory settings button, located on the rear panel of the router, for about 5 seconds, until the Power light begins to blink (see "Back Panel" on page 4). 2. Release the restore factory settings button, and wait for the router to restart, and for the Power light to stop blinking and become solid green. The factory default settings will be restored so that you can access the router from your Web browser using the factory defaults.

    Jun 06, 2011 | Computers & Internet

    7 Answers

    Need password to my netgear router n 300


    what is the model #?
    Most netgear routers default to a username of "admin" and password is either " admin ", "password" or it is just blank. Those are the defaults unless someone changed it.
    If you cant get in you can hold down the reset button on the back for 30 seconds (while it is plugged into power) and that will set it back to factory default settings then one of the above should work.
    If this was a help please give me 4 thumbs up as I am trying to build up my rep on this site!

    Mar 02, 2011 | Computers & Internet

    1 Answer

    Do not know know password for wireless internet


    Hi
    Go here and download the manual http://static.highspeedbackbone.net/pdf/Netgear-WNR2000-manual.pdf
    You will need to reset the router or change the password in the router 1. To change the password, goto Internet Explorer 2. In the address bar type 192.168.1.1 3. Press enter key 4. YOu should see a box with username and password fields. 5. username is admin 6.password is password 7. These are not the wireless passwords but the access password to get in the router. 8. Once in the router interface on Internet Explorer; goto the wireless sections and change the password there.
    To reset the router WARNING: This will reset all the settings to what it was like when it came fresh out of the box. You may need to know some other settings. Restoring the Default Password and Configuration Settings You can restore the factory default configuration settings that reset the router's user name to admin, the password to password, and the IP address to 192.168.1.1. To restore the factory default configuration settings: 1. Use a sharp object such as a pen or a paper clip to press and hold the restore factory settings button, located on the rear panel of the router, for about 5 seconds, until the Power light begins to blink (see "Back Panel" on page 5). 2. Release the restore factory settings button, and wait for the router to restart, and for the Power light to stop blinking and become solid green. The factory default settings will be restored so that you can access the router from your Web browser using the factory defaults.
    Failing this, please refer to the manual, page 29 onwards
    All the best now
    Phil

    Dec 17, 2010 | NetGear WNR2000 Wireless Router

    1 Answer

    My default IP ADRESS is192.168.1.1, and am trying to change my router password for wireless connection


    If you ever lose your settings or if your settings are changed and the router is not functioning properly, you can come to this area to restore your saved settings from the backup file you created. Click Browse to locate the backup settings file you previously created. When you have located it, click Restore and the settings saved within this file will be applied to the router. If you did not create a backup file, you may need to restore the factory default settings.
    device3.gif Factory Settings If you ever want to erase all personal settings of your router, come to this area and click Reload to restore the factory default settings. All the current settings will be lost. If you change the router's configuration and it stops functioning properly you can reload the factory settings to fix it.
    device3.gif The other method to restore the factory default settings is to press in and hold the RESET button on the Wireless MAXg Router for between five and ten seconds. You will lose all of your personal settings if you restore the factory default settings. You might need to do this if you are unable to access the Web User Interface or have forgotten your password.

    Nov 07, 2010 | U.S. Robotics MAXg USR5461 (738168036790)...

    1 Answer

    Where can I find my passphrase for my Belkin wireless router to enable my daughters laptop to connect to my pc-network please.


    The method below will restore all of the settings in the Router to the factory (default) settings.

    You should back up your settings before you restore all of the defaults.

    • Click the "Restore Defaults" button.
    • When the message appears, Click "OK".
    • The following message will appear. Restoring the defaults includes restarting the Router. It can take up to 60 seconds. It is important not to turn the power to the Router off during the restart.
    • A 60-second countdown will appear on the screen. When the countdown reaches zero, the Router's defaults will be restored. The Router home page should appear automatically. If it does not, type in the Router's address (default = 192.168.2.1) into the navigation bar of your browser.

    You can reset your WPA Passphrase.


    If your Problem was solved, Kindly Do rate!

    Regards, WAQAR.

    Nov 21, 2009 | Belkin Wireless G Plus MIMO (F5D9230-4)...

    2 Answers

    I forgot my WPA passphrase on my Belkin G+ Mimo router, how do I get it?


    Using this option will restore all of the settings in the Router to the factory (default) settings. It is recommended that you back up your settings before you restore all of the defaults.

    1. Click the "Restore Defaults" button.

    2. When the message appears, Click "OK".

    3. The following message will appear. Restoring the defaults includes restarting the Router. It can take up to 60 seconds. It is important not to turn the power to the Router off during the restart.

    4. A 60-second countdown will appear on the screen. When the countdown reaches zero, the Router's defaults will be restored. The Router home page should appear automatically. If it does not, type in the Router's address (default = 192.168.2.1) into the navigation bar of your browser.

    From here you can reset your WPA Passphrase.
    Hope this helps...

    Nov 02, 2009 | Belkin Wireless G Plus MIMO (F5D9230-4)...

    2 Answers

    Need to reset router


    If you reset the router you will lose all the settings of the router.
    On the router you will find a small reset button .
    Hold it down for 30 seconds.
    Unplug the power cable and plug it back in.
    wait for 30 seconds and then reconfigure the router.
    Click Here for more info about router set up.

    Oct 20, 2009 | Siemens SpeedStream 2614 Router (ss2614)

    3 Answers

    Forgot password to acess< and or its still default setting. could you tell me what the wireless 700 routers default password is


    Restore Factory Default Settings When you restore factory default settings to the base station, you clear your Internet connection settings and any special base station configurations that you have established. After the restore is complete, you will need to reconfigure your base station settings or restore these settings from a backup file. You should restore the original factory default settings only under the following circumstances: O You are experiencing serious problems with your base station, and resetting the base station does not fix the problem. O You cannot remember your base station password. In this situation, you must restore the factory default settings by using the Restore button on the base station, and then use the default password admin to log on to the Base Station Management Tool. To restore factory default settings 1. Open the Base Station Management Tool, and then click Management. 2. On the Management menu, click Back Up and Restore Settings. 3. Under Restore factory default settings, click Restore Factory Default Settings. While the original factory default settings are being restored to the base station, the Power light on the base station turns orange. When the light is solid green, the settings have been restored. If you want to open the Base Station Management Tool after the settings have been restored, type admin as the password on the Logon page. Do not attempt to log on to the base station until the settings are restored and the Power light on the base station is solid green. After you restore the factory default settings to the base station, you should navigate to each page of the Base Station Management Tool and reestablish the network settings you want, or restore the base station settings by using a backup file. For information about creating a backup file of your settings, see the following section. Be sure to establish your unique base station password as soon as possible after restoring the factory default settings to prevent unauthorized users from logging on. For more information, see “Change the Base Station Password.” please rate this answer, thanks

    Jan 30, 2009 | Microsoft MN-700 Wireless Router

    Not finding what you are looking for?
    Linksys WRT120N Router Logo

    102 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Linksys Computers & Internet Experts

    Prashant M
    Prashant M

    Level 3 Expert

    2260 Answers

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18390 Answers

    Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...