Question about Office Equipment & Supplies

2 Answers

Printer does not turn off, it stays blinking and will not print

Posted by on

  • 6 more comments 
  • Anonymous Jun 03, 2008

    the blinking light keeps on blinking, it will not print and will not turn on or off.

  • Anonymous Jun 24, 2008

    Theprinter light keeps blinking and I can't turn the printer on or off.

  • electron99 Aug 20, 2008

    Canon printer MP780 will not turn off ,display flashes on/off any ideas?

  • nattyp Oct 16, 2008

    blinking green light, won't print, scan, or copy, and won't turn off

  • mkfulcher Nov 22, 2008

    I have a Dell 720 printer. We are able to print our documents out but, the printer will not shut down. The green light flashes or stays solid.



    Thanks,

    Mason

  • Anonymous Feb 06, 2009

    still does not stop blinking

  • Anonymous Mar 03, 2009

    HP Deskjet F335 All-in-one printer it dosn't turn off and i can not print, scan or copy can any one solve this

  • alma siega galolo
    alma siega galolo Dec 29, 2013

    my printer doesn't turn off an indicator on the screen appear

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 103 Answers

Hello

There are many problems that can cause these problems....

1) Ensure there is paper well fitted into the machine.
2) You have got ink.
3) Try pressing the off button for a long time to turn off then turn back on.

It still it does not solve the problem use the printer's main switch.

Good Luck

Genius Guy

Posted on Oct 16, 2008

  • 1 more comment 
  • alma siega galolo
    alma siega galolo Dec 29, 2013

    nothing's even if i press the on/off button

  • alma siega galolo
    alma siega galolo Dec 29, 2013

    nothing' change even if i pressed the on/off button

  • alma siega galolo
    alma siega galolo Dec 29, 2013

    what if the printer indicator has no indicator even if i install new ink printer

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

First remove the device (printer) in your computer next restart your computer and the last install it again the device (printer) and thats it ...............

Posted on Jul 21, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to stop red blinking "paper"? couldn't stop


There is probably a paper jam since you shut it off as it was printing. Turn off the printer. Remove the tray and look inside. Remove any sheets of paper you see. Open the back of the printer (the pass-thru door) and remove any paper you see. Turn on the printer. If that fails, check the blink status against the manual's troubleshooting guide to locate a different solution.

Aug 27, 2010 | Brother HL-2040 Laser Printer

1 Answer

TONER LIGHT STAYS ON WITH NEW TONER CARTRIDGE


Hi,

If the main problem is just the toner light on then what you could do after installing the new toner is resetting the printer. You could do that by powering the printer off, open the front cover (as if you were to replace the toner) with the front cover open and the printer off push and hold the two buttons on the printer and turn the printer on while holding down the buttons then once the bottom light stays on solid, release the two buttons and that should reset the printer.
Now if the toner light is blinking that means that you have reached the 30,000 page mark and the Photoconductor needs to be replaced. If that is not the case you can follow this link to a procedure where it will explain how to reset the Photoconductor. http://bit.ly/91SWS3

Mar 04, 2010 | Lexmark E232 Laser Printer

1 Answer

Attention light blinks after jam


Hi,
most of the HP printers will detect the paper jam and will provide you with help window automatically to rectify the problem. If paper gets jammed, just remove it from backside and then turn off the printer and power it on. cancel any pending printing documents. Everything have to become normal. If it not, try restarting your system too.
I hope its helpful to you

Sep 07, 2009 | HP Photosmart D5160 InkJet Printer

1 Answer

All the Lights are flashing on my HL 5250DN


If printer is blinking all the LEDs then try to turn off the power switch, wait a few seconds, and then turn it back on and try to print again. If all the LEDs are still blinking, press Go and Job Cancel buttons together and let me know what LEDs stay on.

Jun 23, 2009 | Brother HL 5250DN Laser Printer

1 Answer

Hp deskjet 3940 will NOT print


printer is om light is on not blinking and not printing

Feb 19, 2009 | HP DeskJet 3940 InkJet Photo Printer

1 Answer

On off light keeps blinking


try the following:
1. restart the printer spool service in by going into the services applet in the administrative tools section of control pannel
2. check if there's an updated driver for your printer:
uninstall the old driver and printer, reinstall the new driver and printer then test
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&rule=8638&product=303753&
(copy the entire link in the browser address box and hit enter)

post your findings!

Dec 01, 2008 | HP Photosmart 2410 All-In-One InkJet...

2 Answers

HP 932 RED LIGHT STAYS ON


The light you describe is the ink light.
When that light is blinking, try this.

Turn on the printer. Open the front cover and look at the carrier for the ink cartridges. There is a white arrow right above the latch for the color cartridge.
Once the carrier stops moving, the white arrow should be pointing to a symbol which represents the problem (the reason the light is blinking.) Examples are low ink black, low ink color, sick black ( replace ) , sick color ( replace ).

IF you have just replaced your black cartridge, you might need to replace your color cartridge too.
This printer will not work without both ink cartridges installed and full.
You cant print with a full black and an empty color cartridge unfortunately, even if you only want to print black.

Hope this helps!




Aug 27, 2008 | HP DeskJet 932c InkJet Printer

1 Answer

PRINTING PROBEM


carriage moving and stay service station.led blinking what is nature fault

Jun 10, 2008 | HP Deskjet D2360 InkJet Printer

2 Answers

Printer light keeps blinking and status stays offline even it is READY


UNINSTALL AND REINSTALL THE DRIVER SOFTWARE BRO...................

IT MAY LEAD U 2 A SOLUTION.........

TRY IT

Nov 14, 2007 | HP Deskjet D2360 InkJet Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

2,348 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

70347 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...