Question about D-Link Computers & Internet

2 Answers

Wireless connection I am tryin to get wireless internet on my laptop. I the D-Link wireless router on my computer but I can not seem to get the internet on my laptop. Any help?

Posted by on

  • kalpesh jain
    kalpesh jain May 11, 2010

    say me that which model no u r using in d-link

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 49 Answers

Hi sesami,

This issue seems to be more of an alignment issue, pairing your laptop with the WAP. In order for you to hop on to your network, first off, you must ask yourself if you have created any restrictions that prevents any unauthorised connections to take place. Do you have stuff like Mac filtering or WEP encryption on? If you do, then you might need to add yourself into the network by clearing yourself in this method.

Alternatively, another reason why you cannot seem to connect to the network, would be due to the fact that you've set your SSID to not being broadcasted, so that unless you know your netywroks SSID name, it is only then you can connect to the network. Other reasons may include things as simple as not switching on your hardware radio to using 3rd party software like intel proset wireless to conenct, instead of using microsoft's default connection client. As the problem registered is too vague, i have offered whatever potential surface solutions there is. However,if the issue becomes deep rooted, please do let me know and we can trouble shoot further from there. Please do let me know or "ask" me if you need any other help or advise. Thank you.

- Technomancer

Posted on Jun 03, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 611 Answers

Http://support.dlink.com/emulators/dwlg700ap/ i give this web page site go it how to do is helpful to you.

Posted on Jun 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Problem with D-Link 1360 n access point. Not able to visit ip address 192.168.0.50


The internal Wi-Fi radio is enabled by default on most new wireless routers.
However, if you purchased a D-Link router used, you may find that the internal radio is disabled because the previous owner had an exclusively wired network and wanted to eliminate the possibility of a hacker breaking into one of her computers.

Enable the Wi-Fi radio on your D-Link router to enable your computers to connect to the Internet wirelessly.

Connect the router to your computer using an Ethernet cable.
Open a web browser and browse the IP address "192.168.0.1."

Enter the username "admin" and leave the password blank.
Note that these are default values; both the user name and password can be changed.

Click the "Setup" tab at the top of the screen, then click the "Wireless Settings"
Scroll to the bottom of the screen and click the "Manual Wireless Network Setup" button.

Place a check in the box labeled "Enable Wireless" and click "Save Settings."
Click start control panel administration tools computer management device manager scroll to network adapters should see a yellow question ? exclamationmark! or a red Xright click install drivers.

The driver might be on the disc supplied by your ISP internet service provider
or the motherboard disc
If you cant install the driver
Make sure you Ethernet/internet is enabled in biosrestart your computer during the boot up process you will see on your screen a certain key to
press to enter set up (BIOS) press and hold that key to enter bios using arrow keys navigateto integrated peripheralslook for SiS On Chip Pci Device press enter scroll to SiS 10/100m press enter make sure its
"Enabled"ima

D-Link Wireless Router

D-Link routers use the connection from your Internet service provider to create a wireless network for the various Wi-Fi- enabled devices in your home or office.

Once the router is installed, you can truly enjoy the portable capabilities of your laptop or other wireless device.

D-Link routers have a straightforward installation process, despite the advanced technology behind wireless equipment. So there is no reason to wait around for a technician to help you install your wireless equipment. Remove the cable that is attached to the "Internet" port on the rear of your DSL or cable modem.

Plug the Ethernet cable into the "Internet" port on the modem and plug the other end of the cable into the "Internet" port on the rear of the D-Link router. Attach the power adapter to the port on the rear of the router and plug the adapter's cord into a outlet.

Remove the power cord from your modem and wait 10 seconds before plugging it back in.
This will reinitialize your modem and force it to establish a connection to the D-Link router.

Your router will immediately begin distributing a wireless network with the "D-Link" network name.

Connect your computer to one of Ethernet ports on the rear of the router and open a Web browser.

Type "http://192.168.0.1" into the address bar and press "Enter." Enter "admin" into the username field and type "admin" again into the password field.

Click "OK" to open the wireless configuration page. Click "Wireless Security Setup Wizard" to create a wireless password for your router's network.

Click "Apply" to save the changes to the router's settings.
Network D-Link wireless

Type the router IP address, "192.168.0.1", into your Internet browser. Press "Enter" on your keyboard.

Enter your username and password to log into the D-link configuration panel.
By default, the username is "Admin" with a blank password field.

To prevent outsiders from being able to access your D-link router's configuration panel, change the username and password to something more secure.

This can be done by selecting "Tools" from the menu and selecting "Admin."
Select "Administration Settings" and enter your new username and password.

Save your changes by clicking "Apply."
Enter the IP addresses for the computers you want to give access to your router.

You can do this by clicking the "DHCP" link underneath the "Home" tab.
Click "Apply" to save the IP addresses.

Select the "Wireless" link underneath the "Home" tab.
Enter a name in the "SSID" field to identify your wireless network.

Choose "WPA" for your "Security" option.
WPA will provide the highest level of security for your wireless network.

Create a WPA password to access your wireless network.
For maximum security, enter a combination of numbers, letters, and symbols.

Store your password in a safe place in case you ever forget it.
Click "Apply" to save your settings.

Install a software firewall program on your computer to add an additional measure of security for your wireless network.

A few of the popular firewall programs available are Norton Antivirus, McAfee and Zone Alarm.

Mar 18, 2014 | D-Link Wireless N Access Point Dap-1360 -...

1 Answer

Link led keeps on flahing and act led is not coming only


Try resetting the Linksys router.
To reset the Linksys back to the default settings - Press and hold the pinhole RESET button at the back of the router with the power ON for 20 secs. then release the RESET button.
To connect to your wireless router, the router's wireless settings needs to be configured with the SSID, encryption etc. and also the wireless cards in all the laptops/computers needs to be configured with these router's wireless settings. Then the laptops/desktop computers can communicate with your wireless router.
Connect a LAN cable from the Linksys to the LAN port on your computer.
Open a browser and enter the Linksys configuration URL
http://192.168.1.1
The default login = admin
The default PW = admin
You can protect your router by changing the default admin PW (write it down and put it in a safe place)
Go to the wireless configuration and set up the SSID and WPA or WPA2 encryption to protect your wireless network and Internet from unauthorized access.
Now apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Mar 02, 2013 | Linksys Wireless-G WAP54G 802.11g/b...

1 Answer

I am trying to use wireless on my computer but it is confusing... can you help please


If you have a wireless router and it is connected to the DSLor cable modem then - To connect to your wireless router, the router needsits wireless settings to be configured with the SSID, encryption key etc., alsothe wireless cards in all the laptops/computers needs to be configured withthese router's wireless settings. Then the laptops/desktop computers cancommunicate with your wireless router and access the Internet via the DSL or cable modem.

Aug 30, 2011 | Dell Computers & Internet

1 Answer

My U.S.Robotics has malfunctioned but still i can use it as a wireless access point...but i dont know how to do it....i have a DSL modem (not wireless)...and it works perfectly but the problem is that its...


If you have a wireless router and it is connected to the DSLor cable modem then - To connect to your wireless router, the router needsits wireless settings to be configured with the SSID, encryption key etc., alsothe wireless cards in all the laptops/computers needs to be configured withthese router's wireless settings. Then the laptops/desktop computers cancommunicate with your wireless router and access the Internet via the DSL or cable modem.

Aug 17, 2011 | U.S. Robotics (USR5450) 802.11g/b Wireless...

2 Answers

Please I cannot connected to internet


If you have a wireless router and it is connected to the DSLor cable modem then - To connect to your wireless router, the router needsits wireless settings to be configured with the SSID, encryption key etc., alsothe wireless cards in all the laptops/computers needs to be configured withthese router's wireless settings. Then the laptops/desktop computers cancommunicate with your wireless router and access the Internet via the DSL or cable modem.

May 26, 2011 | Computers & Internet

1 Answer

Wont connect to wireless


If you have a wireless router and it is connected to the DSLor cable modem then - To connect to your wireless router, the router needsits wireless settings to be configured with the SSID, encryption key etc., alsothe wireless cards in all the laptops/computers needs to be configured withthese router's wireless settings. Then the laptops/desktop computers can communicatewith your wireless router and access the Internet via the DSL or cable modem.

Apr 29, 2011 | D-Link AirPlus Xtreme G DWL-2000AP...

1 Answer

It didnt works, Message in Laptop: we need Password, eventhough we already did setup with CD


To connect to your wireless router, the router needsits wireless settings to be configured with the SSID, encryption key etc., alsothe wireless cards in all the laptops/computers needs to be configured withthese router's wireless settings. Then the laptops/desktop computers cancommunicate with your wireless router and access the Internet via the DSL or cable modem.

Apr 17, 2011 | Belkin Wireless-N Wireless Router with...

1 Answer

My router does not show wireless signal just wired


Your computer cannot detect the Belkin if the wireless card in the computer has not been configured with the Belkin wireless settings.
The WEP, WPA, WPA2 encryption key is in your router's wireless settings. Log into your router and got to the wireless settings, you will need to get the SSID and the encryption key. Then go to your computer/laptop's wireless card and configure it with the router's SSID and encryption key, so it will then connect to the wireless router and the Internet.

To secure your wireless network from unauthorized access,please click on this link and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security
.

Dec 24, 2010 | Belkin N1 Wireless-N Wireless Router

1 Answer

How can you use public access on your desktop and netbook with a netgear router and adapter walmart sales lady said it can be done with just the router and adapter setup everything we needed was in the...


Just having the wireless router without connecting it to cable modem or DSL modem will not allow you to get onto the Internet. The wireless card in your computer/laptop will allow you to get onto the Internet at a free public WiFi hot spot location such as McDonalds, Star Bucks, at the airport.
Also the wireless card in your computer/laptop may allow you to connect into an unsecured wireless router from your neighbors, if their wireless router is within range of your computer/laptop but without their permission to use their Internet, it is considered stealing from your neighbor. They have a set download limit from their Internet Service Provider and by you connecting to their ISP you may cause them to exceed their download limit and they would be charged additional costs for every Mega byte over their limit.

Sep 28, 2010 | NetGear RangeMax Dual-Band Wireless-N...

1 Answer

I have a brand new Acer Inspire 5516, purchased for the wireless function. Have a DSL modem in the same room. Can't get the Acer to work wireless, only with the modem connected. What am I doing wrong? Or...


You need to have your DSL modem connected to a wireless router. The wireless router will then put your internet connection on the airwaves so your Acers will connect wirelessly to the router then they will be able to access the internet.

Jul 26, 2009 | Acer Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Mike

Level 3 Expert

4332 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...