Question about Allegro DVD/VCR ABV511

1 Answer

I just need to know how to link up my Allegro DVD/VCR REMOTE CONTROL to my Phllips Magnavox Television.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

TUNING This DVD+VCR is equipped with a frequency synthe- sized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CATV channels 1-125. Auto Channel Programming 1. Choose the SOURCE SELECT option, then use b / B to select TUNER. Use b / B to switch among TUNER, LINE1, and LINE2. 2. Choose the AUTO CHANNEL SET option, then use b / B to find channels. • The tuner will automatically cycle through all available channels (TV/CATV) in the area and place them in the tuner's memory. •After the AUTO CHANNEL SET is complete, the TUNING menu will hide and return to the TV screen automatically. 3. Make sure the TUNING BAND is set appropriately (TV or CATV). • TV : If you are using a standard antenna to receive channels. •CATV : If you are using basic cable to receive channels.

Posted on Oct 16, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to use without remote


UPC 961613194763 053818570722
  • HDMI Output (rear), Remote control, Plays DVD Video, DVD_R/RW (VR format), DVD-R/RW (Video format), CD-R/RW, Audio CD, MP3)
  • MAGNAVOX ZV427MG9 DVD Recorder / VCR Combo LINE-IN RECORDING (NO TUNER)
  • 1080 Up-Conversion, Progressive Scan Video Out
  • Five Speed for up to 6-Hours Recording, Dolby Digital Stream Out
  • 2-Way Dubbing (VCR > DVD, DVD > VCR), Satellite Link Recording, S-Video Input / Output
  • Dec 02, 2012 | Magnavox ZV427MG9 DVD Recorder VCR

    4 Answers

    MAGNAVOX UNIVERSAL REMOTE


    hi have you tried scanning all codes with the remote untill it picks up the correct signal if you have the manual it will tell you how to do this if its possible it will work after searching the codes.
    Also what model remote and what make cable box

    Mar 29, 2008 | Philips Magnavox Learning Universal Remote

    1 Answer

    I have an Allegro DVD/VCR Moel ABV511. I have an RCE Universal Remote and the code it offers for Allegro DVD/VCR players doesn't work in setting up the remote to control the player. Their code is 5...


    There is not really a true 'universal remote.' If the remote is of older design than the set you wish to control, it will not contain the code set you need.
    Before you buy another, check the mfr's website for code sets for any given model remote to ensure you aren't buying another one which will end up in a drawer. Unfortunately, this is a very common problem.

    Jan 09, 2011 | Allegro ABV511

    1 Answer

    Some buttons don't work on the remote, some do???


    The remote control might need to be repaired. They repair them at http://www.replacementremotes.com/ and they sell self repair kits at www.keypadrepair.com
    There are other sites but I use those because the company I used to work for relied on them as a reputable company and I don't know about the others.

    You can try a remote reset by turning off and unplugging the Allegro. Leaving it unplugged take the batteries out of its remote. Point the remote at the Allegro as if you were going to power it on. Hold down the power button for two minutes. Then press and release each button on the remote control twice. Next plug the Allegro back in and power it on from the on off button located directly on it. Then put the batteries back in the remote control and try it.

    Sep 28, 2010 | Allegro DVD Recorder VCR Combo ABR521

    1 Answer

    Need code for a magnavox dv220mwn dvd/vcr


    The book don't have a code for a Magnavox DVD/VCR combo you can try Magnavox DVD 0503, 0675. or VCR 0035, 0039, 0081, 0000, 1781 you might be able to get some functions. Please give me a vote if this works.

    Mar 03, 2010 | One For All URC-4021 Remote Control

    2 Answers

    Jackie


    I need a code for my television. I have a sanyo tv., the remote i have is a philips magnavox. my email is: pauljrosborne32@yahoo.com

    Aug 14, 2008 | Philips Magnavox REM-350 Remote Control

    2 Answers

    How to turn off progressive scan on Allegro Dvd Player


    yeah.same here.=[
    but it only says that for the dvd mode.

    Oct 24, 2007 | Allegro DVD/VCR ABV511

    6 Answers

    Remote control code for magnavox dvd/vcr combo


    I need codes for my Universal Philips Magnavox remote for a Sanyodvd vcr combo ?

    Sep 07, 2007 | Philips Magnavox Learning Universal Remote

    Not finding what you are looking for?
    Televison & Video Logo

    235 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Allegro Televison & Video Experts

    Kazim ERGUNEY
    Kazim ERGUNEY

    Level 3 Expert

    577 Answers

    Computer Repairing
    Computer Repairing

    Level 3 Expert

    14641 Answers

    ray gallant

    Level 3 Expert

    42968 Answers

    Are you an Allegro Televison and Video Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...