Question about Sylvania 6842PE 42 in. HD-Ready Plasma Television

Open Question

42 INCH 6842PE MA

We where watching tv and the dog stepped on the remote activating the sleep mode. My son said he grab the remote and cancelled it. after a while the the tv shut off and know when you turn it on it stays on for approximatley two seconds then shuts back off. could this be in the switch or possible a fuse

Posted by on

  • Anonymous Dec 16, 2008

    Standby light is on when power is pressed it turns green I hear a relay click and then back to standby...


×

5 Suggested Answers

  • 6 Answers

SOURCE: 6842PE

Blown Capacitor C2250 on the main Power supply. Little blue capacitor.
http://i133.photobucket.com/albums/q68/rwlib3/DSC_0426.jpg
I have a couple left.

Posted on Nov 01, 2008

  • 6 Answers

SOURCE: my 42 inch

most likely a blown capacitor. common problem with this model. The capacitor can be replaced. 

Posted on Nov 28, 2008

  • 133 Answers

SOURCE: seems like a fuse blew on my sylvania 42'' plasma bought in 04?

it isnt a fuse, if your fuse was blown, it wouldnt even turn on, even for a second, it is your Y-SUS board, you can order one through there website, i think

Posted on Jan 11, 2009

  • 10 Answers

SOURCE: Picture but no sound Samsung 42 inch

Did you completly reset the cable box. Similar thing happened to me. When I pushed the TV remote the volume went up and down but no sound. I pulled the power from the cable box, waited 30 seconds and repowered cable box. Sound came back on.

Hope that helps.

Posted on Jan 14, 2009

555timer
  • 4 Answers

SOURCE: tv wont stay on....

the answer is here in FixYa:

http://www.fixya.com/support/t123497-tv_turns_off

Posted on Dec 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I keep my tv from stop cutting off


When you have a bad power supply in the TV, it could be it will switch of when it becomes to hot, or when a threshold in voltage or current exceeds. Perhaps only one or a few electrolytic capacitors are dying. I would start saving up for repairs or for a new TV.

Jan 13, 2015 | Olevia 2 Series 242T 42\" LCD TV...

1 Answer

Hi, I need a remote control code for use with dish network


Hello, hopefully you got this resolved already, but if not, here are some quick and simple steps to go through. Follow the link below, and it will walk you through a power scan, so that the remote can find the correct code for the tv. I hope that this information helps!


http://www.dishnetwork.com/SupportSection/power-scan-instructions


Becki Barned
DISH Network Customer Service

Oct 20, 2010 | Sylvania 6842PE 42 in. HD-Ready Plasma...

1 Answer

Just bought a 42 inch lg tv and cant programme my


please follow the steps below with you sky remote:

TV
RED + SELECT (hold these down until it flashes twice)
TV
0056

Try the volume button if this works then press SELECT. If it does not work then press TV again then try the volume ( repeat this step until the volume works. Dont forget to press the SELECT button to save the code to the remote.

This should sort you out. Please leave a thumbs up when you get it working.

Cheers Little Dish Fitter

Sep 24, 2009 | LG 42LC2D 42 in. LCD HDTV

2 Answers

My 42 inch sylvania plasma tv does not have a coax connection, so how do i hook up my cable to the audio/video connection? i know there is an rf converter to transfer audio/video to coax but i really...


Since your TV only has audio and video input jacks, you can connect those to audio and video output jacks on the VCR. Now connect the coax cable to the RF/ant input on the VCR and you'll have to change channels by using the VCR channel selector.
Let me know if you require further assistance.

Aug 08, 2009 | Sylvania 6842PE 42 in. HD-Ready Plasma...

1 Answer

Haier 42 inch tv says no signal, not available


Your son, or daught hit some button, happend to me too. But i dont remember wat i did. Just try to unplug the tv and plug it bck in

Jul 21, 2009 | Haier HL19T 19 in. LCD TV

1 Answer

I cannot get close cation on the sylvania 42 plasma TV. I have gone through the menu to set it up but it.But I cannot get close caption to work


Most likely it is in the cable box settings accessed through the cable remote, not the tv settings which are set up through the tv remote.

Jun 04, 2009 | Sylvania 6842PE 42 in. HD-Ready Plasma...

1 Answer

Sylvania 6842PE 42 inch Plasma Fuzzy picture and horizontal Lines


USUALLY THIS PROBLEM IS CAUSED BY A DEFECTIVE X OR Y SUSTAIN BOARD. ESTIMATE BETWEEN $300- $700

Apr 03, 2009 | Sylvania 6842PE 42 in. HD-Ready Plasma...

3 Answers

Sleep Timer on remote does not work


First try to access the sleep timer menu from the controls on the TV to verify the TV is working.

If that works then the remote has the problem.
Now try this;
Step 1- Pull the batteries out of the remote and leave them out until Step 4.
Step 2- Press and release each and every button one at a time on the remote control until every button has been pressed and released at least once!
Step 3- If your remote has slide switches, you must move the switch to each position then repeat the button pushing in Step 2.
(When you're done, be sure to put the slide switch in the correct position to operate the unit the remote came with!)
Step 4- Put the batteries back into the remote, being very careful to install them correctly.
New batteries should be used if you're not sure about the old ones.
If this does not work, then you may need a new remote unit.

Mar 10, 2009 | Olevia LT37HVS 37 in. LCD HDTV

2 Answers

My 42 inch


when i turn the t.v on it switches back off. to standby mode.it also makes a little glitchy sound after it has turnd itself off.
what do i do?

Aug 12, 2008 | Sylvania 6842PE 42 in. HD-Ready Plasma...

1 Answer

Sylvania 6842PE picture is 'zoomed in'


There is a button labeled "ZOOM" on your remote control, press it to cycle the ZOOM settings.

Nov 17, 2007 | Sylvania 6842PE 42 in. HD-Ready Plasma...

Not finding what you are looking for?
Sylvania 6842PE 42 in. HD-Ready Plasma Television Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sylvania Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69808 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Are you a Sylvania Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...