Question about Printers & Copiers

1 Answer

Printing issues I have an old konica copier, it works good (for the most part) but sometimes it only prints 2/3 of a sheet. It still copies from the (starting) edge, but only prints on the last 2/3 of the sheet.. Example: If I wrote the numbers 1,2,3,4,5 on a paper and copied it, on the copy I would just get 1,2,3 starting anyware from 2" to 4" in from the leading edge and that seems to always be the same distance once it starts to do this (as in remains constant till it prints right again).. Turning it on and off doesn't help and there are no set number of times it will do this, it may do it or 1 sheet or 20... Any thoughts? LOL other than getting a new one ;-)

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 53 Answers

Sounds like your registration clutch is slipping/grabbing.It is probably a magnetic clutch attached to the rollers that take the paper AFTER the feed rollers >Disconnect power,take the back off, and see if you can spot where this roller comes thru into the drive system.There'll be a small magnetic clutch with 2 wires into it..sometimes washing it in methylated spirit or similar will fix it, and sometimes it won't...worth a try.Usually easy to get off, just a circlip, don't use anything that might melt plastic (like thinners) you'll end up with a sticky blob!

Posted on Jun 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

KONICA MINOLTA BIZHUB C250 Printed only magenta


Does the demo page do the same? Mite have image control board failure. And electrical storms on a good surge protector not a Ace hardware 19.99 special, of course nothing against Ace Hardware :). Could also be a High Voltage board failure. Meter count page OK print out.

Apr 19, 2015 | Konica Minolta bizhub C250 All-In-One...

1 Answer

Why can I print a test page out but with regular printing it jams and gives c-1182 error


Finisher motor issue, remove the finisher/and unplug does it work?

what are you printing are you using staple or hole punch try printing single sheet of paper.

Jul 08, 2014 | Konica Minolta bizhub C250 All-In-One...

1 Answer

Printing jobs are coming out blank


Does this happen if you make a copy? Or print any internal form meter count sheet demo page etc.

Mar 14, 2014 | Konica Minolta bizhub C250 All-In-One...

1 Answer

How can i print both sides of paper on my magiccolor5550


IF you have the optional duplex unit installed on your printer then when you go to print something, your printer setup screen should have a duplex/2 sided printing box you can check. This will be under printing preferences or properties. If you do NOT have the optional duplex option then you have to manually duplex. That means on say a 2 page document that you want 10 copies of you have to print 10 copies of page 1. Then take those 10 copies and place them back into the paper tray and print 10 copies of page 2 onto the backs of page 1.
Those are you 2 choices for duplex printing.
Good Luck and Thank You for using Fixya.

Nov 17, 2010 | Konica Minolta Magicolor 5450 Printer

2 Answers

No matching paper size set paper on bypass tray


Someone has told the machine to either make a copy or print from a PC to the Bypass feed tray on the copier. If you are not trying to print something by using the bypass tray then just turn the machine off, then on again to clear the request from the copier. If you are trying to print or copy from the bypass tray then simply insert the correct paper size and direction into the bypass tray slot and the machine should automatically begin printing.
Good Luck and Thank You for using Fixya.

Sep 22, 2010 | Konica Minolta DiALTA Di200 Copier

1 Answer

How do I print 8-1/2" x 14" paper. I only have one 8-1/2" x 11" tray? Konica Minolta Magicolor 5430DL


On the 5430 DL there is an aux legal tray that can be purchased for legal printing. On a later successor the 5550 a manual feed option was included, however for the 5430 there is no option for printing legal without the extra tray being installed. On a side note, I have this tray and when not printing legal it lets me load an extra 500 sheets of letter paper which is very convenient when I need to print a bunch of sheets overnight.

Mar 15, 2010 | Konica Minolta magicolor 5430 DL Laser...

1 Answer

Konica Minolta Pagepro 1350 page count or Print Config sheet?


please go printer utilty option on your pc then you can print a testpage

Feb 10, 2010 | Konica Minolta PagePro 1350W Laser Printer

1 Answer

My copier is printing black copies. It was


if its good looking black copies then your charger is shot...

Dec 02, 2009 | Printers & Copiers

1 Answer

Konica minolta 600 has problem printing duplex mailmerge and tir


CAUSE: The tri-fold printed on side is set incorrectly on the machine.

SOLUTION: To change the tri-fold from printing inside fold to printing outside fold, perform the following:
1. Press the Utility key.
2. Select Admin mode and enter the password.
3. Press Copier Setting.
4. Press the down arrow.
5. Press Tri-Fold Printed on Side Selection.
6. Press either INSIDE or OUTSIDE.
good lock

Feb 28, 2009 | Panasonic DP-C264 Copier

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96576 Answers

old marine
old marine

Level 3 Expert

1472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...