I have just recieved a sliding table for my spindle moulder (TF 100 M). It came with instructions in German and French but not English! Is there anywhere online I can download the English version? Many thanks.

KESS V2 can support English, French, Italian , Dutch ,Portuguese and Spanish.

You can get the manual on the link below.

http://www.htc.com/www/userguide.aspx?p_id=324

You can use the table below to identify the 3 digit code on the base plate with it's language. Please note that this is a comprehensive list of the Hewlett Packard codes, version of mobile devices may not be available in every listed form.
hp Internal Regional Codes #AB0 Taiwan #AB1 Korea #AB2 China #AB4 Singapore Malaysia #AB5 Hong Kong #AB6 Arabia (French) #AB7 Greece #AB8 Turkey #AB9 Portugal #ABA US (English) #ABB Europe (English) #ABC Canada (French) #ABD Germany #ABE Spain #ABF France #ABG Australia #ABH Netherlands #ABJ Japan #ABM Latin America (Spanish) #ABN Norway #ABP Swiss (German) #ABQ Swiss (French) #ABS Sweden #ABT Hebrew #ABU UK (English) #ABV Arabia (English) #ABW Belgium (Flemish) #ABX Finland #ABY Denmark #ABZ Italy #AC4 Brazil #AC8 Argentina (Spanish) #ACB Russia #ACQ South Africa #ACY Sweden (English) #AKB Czech #AKC Hungary #AKD Poland #AKG Eastern Europe #AKJ Hebrew Enabled (English) #AKL Thailand #AKN Slovenia #AKR Slovakia #AKV South America (Spanish) #ARL Baltic

If you can find the menu, look for a setting labeled with something LIKE: "idioma" (if it's been changed to spanish), "idiome" or "langue" (if changed to french) or "sprache" or "zunge" (if it was changed to german). Select this section and look for "ingles", "anglais" or "englisch". (These all mean "English" in spanish, french, and german, respectively.) Choose this and it should switch back to english. I hope this helps! Sincerely, Der Strom

You should be able to find it on their website. Most likely a PDF document you can download and print.

Here is your link. Kindly check it and if finding any trouble you are most welcome to comment back I'll provide you other link.

You use a 1/2 inch socket wrench to remove the nut at the top of the spindle shaft, slide the old sanding sleeve off and the new one on.  Replace the nut.  You may also have to insert a different size table insert if you are changing the sleeve size.
Instruction manual is available free at: http://www.dewaltservicenet.com/documents/English/Instruction%20Manual/Delta/a20932,sa350k.pdf

Hi,
Please download the manual on my site at this address :
http://users6.jabry.com/eweymaere/WD14481.pdf

Emile Weymaere Belgium
weymaere@gmail.com

If its same as the Faxjet 555, try looking on the Sagem Communications site, under support. I noted the lable under the machine does not say Philips, but Sagem, and have, I hope downloaded the english instructions.

What is your brand ?