Question about Printers & Copiers

Open Question

Lexmark printer c530dn booklet printing from word adds a black line or border around original pages and does not reposition and resize all drawn objects on page. i cannot get rid of this black line. drawn objects print fine from same file in pdf format (obviously a bug) Alison sauer

Posted by on

  • 2 more comments 
  • alisonsauer Jun 02, 2008

    urm no - none of this happens when I print the same file on my HP printer.

    Also the drawn objects print fine in pdf

    definitely a driver issue


  • Anonymous Nov 24, 2008

    Exact same thing here with a C534dn...

  • sadgrove469 May 20, 2009

    Same problem with the Lexmark C782dn - seriously, I cannot find a solution, and there is not info anywhere on the web (after one hour searching).

  • Patrick Michaels
    Patrick Michaels May 11, 2010

    hmmm..that sounds like a page formatting issue, not a printer issue.

×

5 Suggested Answers

CarlGehrke
  • 169 Answers

SOURCE: Wont Print a Large PDF File

You don't say what kind of printer or computer so it's a little hard to narrow down what is happening. That said, it sounds like you've running out of disk space while the print driver is trying to make data to send to the printer. If you can print the 1st few pages (try 4, then 3, etc.) then this is almost certainly happening.
Check how much free space is available on your hard drive.

Carl

Posted on Dec 10, 2008

  • 1684 Answers

SOURCE: The Lexmark c530dn prints fine. Smudging down both sides.

Hello,

Your problem is caused by 2 worn photoconductor units. If you open the front door like you are changing toner, the photoconductor units will be mounted to the door that swings down. You will see should see four units one for each color, red, blue, yellow and black. If you look at the red and black units the ends will look different than the blue and yellow. The photo units have teflon coating that wears off and causes your proble. The replacement part number is C53030x and you will need 2 of them. Just replace the red and black ones and your printer will be back to normal. If you can't locate them locally, let me know and we can ship them to you.

Buddy
Corporate Computer
www.ccl-la.com
Over 21 year of PC and printer support/service

Posted on Jun 19, 2009

canontech
  • 1219 Answers

SOURCE: canon c4080 can not print pdf files

Do you have installed PS DRIVERs

Posted on Jan 13, 2010

Ricky8
  • 337 Answers

SOURCE: I have a Lexmark x543 printer and when I print a

try to print a test page .. if u get the lining there then its a problem with the printer drum .. u might need to get it replaced .. if not then its an issue with the settings .. you can also try to reinstall the drivers in that case.,

Posted on Oct 21, 2010

HansPP
  • 2510 Answers

SOURCE: There is a faded blue strip on the left side of

Any marks on the paper come from the drum, this could be a circumferential scratch on the drum or a void in the wiper that clears the excess toner. Whatever, you need to check the drum and possibly need to replace it.

Posted on Jan 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lexmark c530 print any page all in black as bakgroud


It is probably a faulty black drum unit. I would hazard a guess that something like a corona wire or Primary Charge roller is not transfering charge to the optical drum correctly.

Aug 12, 2014 | Lexmark C530dn Laser Printer

1 Answer

Lexmark C530dn won't print with only black cartridge--it used to do this beautifully. I saw a post on this, but their solution didn't work.


To configure the printer to print in black only, please click on the link provided below.
http://bitly.com/r97CV6

If you need further assistance, please contact Lexmark Technical Support.

Oct 10, 2011 | Lexmark C530dn Laser Printer

1 Answer

There is a faded blue strip on the left side of every printed page from the lexmark C530dn laser printer. I do I clean it to remove this line?


Any marks on the paper come from the drum, this could be a circumferential scratch on the drum or a void in the wiper that clears the excess toner. Whatever, you need to check the drum and possibly need to replace it.

Jan 28, 2011 | Lexmark C530dn Laser Printer

1 Answer

I have a Lexmark x543 printer and when I print a document from MS Publisher, there is a small border around the edge of the doc. I have change my printer settings to Whole Page printing but it does not...


try to print a test page .. if u get the lining there then its a problem with the printer drum .. u might need to get it replaced .. if not then its an issue with the settings .. you can also try to reinstall the drivers in that case.,

Oct 21, 2010 | Lexmark T632 Laser Printer

1 Answer

When pages print out they have black and syan colour down the edges


You may have a build up of toner on your drum unit or fuser. I recommend a cleaning to resolve your print issue.

Jun 03, 2010 | Lexmark C530dn Laser Printer

1 Answer

The Lexmark c530dn prints fine. Smudging down both sides.


Hello,

Your problem is caused by 2 worn photoconductor units. If you open the front door like you are changing toner, the photoconductor units will be mounted to the door that swings down. You will see should see four units one for each color, red, blue, yellow and black. If you look at the red and black units the ends will look different than the blue and yellow. The photo units have teflon coating that wears off and causes your proble. The replacement part number is C53030x and you will need 2 of them. Just replace the red and black ones and your printer will be back to normal. If you can't locate them locally, let me know and we can ship them to you.

Buddy
Corporate Computer
www.ccl-la.com
Over 21 year of PC and printer support/service

Jun 15, 2009 | Lexmark C530dn Laser Printer

1 Answer

Center and margin lines are appearing in a booklet.


rpcs driver= printer properties--printing preferences--print settings--add/change custom settings---edit--draw border.

May 07, 2009 | Ricoh Aficio 450 Copier

1 Answer

Lexmark x4550


Hello,

That usually means that the document with the border has margins that are outside the printable range of the printer. Try temporarily setting the margins to 1" all the way around and try again. If that solves the issue then you can decrease the margin to your desired setting.

Thanks

Aug 03, 2008 | Lexmark P4350 All-In-One InkJet Printer

2 Answers

Printing web pages that overlap the screen


Check/configure application/browser sofware page setup, printer properties.

May 26, 2008 | Lexmark X2500 All-In-One Printer

1 Answer

Lexmark c530dn wont print


disconnect this printer from your gigabit switch and try running it by itself. this printer should have its own on board memory. you may have uncompatible memories.

Apr 09, 2008 | Lexmark C530dn Laser Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96417 Answers

old marine
old marine

Level 3 Expert

1461 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...