Question about Televison & Video

1 Answer

We are in Ghana we need frequency and we update to get more channel

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 662 Answers

Your flat panel TV is probably factory set to receive ATSC signals (Hi-def DIGITAL TV), whereas
Ghana may not have converted from analog TV (NTSC) yet.

Digital TV's cannot receive analog signals. I'm just guessing about whether or not Ghana supports
Hi-Def broadcasts - you'll have to check with (any) TV channel in Ghana. The Analog-to-digital
conversion is an expensive one at the broadcast end, and may not have happened yet in Ghana.

The US conversion took place by FCC mandate June 12, 2009.
There are available $65 (USD) digital-to-analog converters, but what you may need is an
analog-to-digital converter, which doesn't exist. Your Flat-panel TV amy have to wait until Ghana
begins broadcasting a Hi-Def TV channel.

For a HD antenna, a regular old rabbit ear-type antenna will do.

Posted on Oct 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I would like to know if there is away I can print out the frequencies & channels for Monterey, Calif Thank You


Yes, go for it :>)

  • Monterey County, California (CA) Scanner Frequencies and ... www.radioreference.com > US > California Scanner Frequencies and Radio Frequency Reference for Monterey County, ... Monterey County California . ... Monterey Regional Waste Management District : FM :
  • N6SPD : MONTEREY PENINSULA POLICE FREQUENCIES n6spd.com/freq/mcfreq.htm 155 rows · CHANNEL # FREQUENCY: TONE: SHERIFF: North Dispatch: 1: 159.090: ...
    • AGENCY TYPE CHANNEL # FREQUENCY SHERIFF North Dispatch 1 159.090 CAL FIRE North Dispatch Command 1 152.720
  • Monterey County Scanner Frequencies (CA) - Intercept interceptradio.com/slocal.php?disp=1&country=US&state=CA&county=... 39 rows · Home of the world's largest radio/scanner frequency database ...
    • Freq PL/M City Call 51.76 114.8 Monterey WE6R 51.82 136.5 San Ardo WR6VHF
  • Monterey Park Scanner Frequencies (Los Angeles County CA) www.interceptradio.com/slocal.php?disp=1&country=US&state=CA&county... Scanner Frequencies for Monterey Park Los Angeles county CA US. ... Los Angeles County Scanner Frequencies (CA) ... Channel Notes;
  • View and Compare Your Scanner Options ' Police Scanners www.policescanners.net/scanners-ca-monterey View and Compare Your Scanner ... About Us; View and Compare Your Scanner Options Monterey County, California Fire Police ... Fire and EMS channels in ...
  • California: Monterey - Radio Scanner Frequencies www.scannerfrequencies.com/radio/california/monterey/page/2 Scanner Frequencies ... USA CA Monterey. Articles Contact Submit. Follow @ScannerFreqs. California: Monterey. Frequency: CallSign: DBA/Licensee: City:
  • California Public Safety Frequencies - Bay-Net www.bay-net.org/frequency_calif.html 866.2000 - Channels 20 & 21 - Northern California. ... to air tactical frequencies. In southern California FIRESCOPE area ... California Public Safety Frequency ...
  • Monterey Park, California - Scanner Frequencies - Phone ... www.cityfreq.com/ca/montereypark Scanner frequencies, phone numbers, ... Monterey Park, California Scanner Frequencies. Public Safety. AHMC MONTEREY PARK HOSPITAL (CARMEN ...
  • FCC Licenses and Scanner Frequencies for Monterey County ... www.radioreference.com > US > California > Monterey (County) FCC Licenses and Scanner Frequency Listing for Monterey County, California ... US > California > Monterey (County) County Home;
  • Monterey County Frequencies - Scanning California www.scancal.org/old/monterey/county.html Monterey County Napa County ... Scanning Central & Northern California Frequencies Monterey County Last Updated: ... Channel 2 - Secondary
  • Feb 04, 2016 | Radio Communications

    Tip

    Wireless Tip: Does you wireless router keep disconnecting / dropping the...


    Home wireless networks that are based on the 802.11b or 802.11g/n standards transmit their signal in a narrow radio frequency range of 2.4 GHz. Various other electronic devices in a home, such as cordless phones, garage door openers, baby monitors, and microwave ovens, may use this same frequency range. Any such device can interfere with a Wi-FI home network, slowing down its performance and potentially breaking network connections.

    The 2.4 GHz Wi-Fi signal range is divided into a number of smaller bands or "channels," similar to television channels. Many wireless products ship with a default Wi-Fi channel of 6. If encountering interference from other devices within the home, consider changing the channel up or down to avoid it. Some Wi-Fi channel numbers overlap with each other. Channel 1 uses the lowest frequency band and each subsequent channel increases the frequency slightly. Therefore, the further apart two channel numbers are, the less the degree of overlap and likelihood of interference.


    If this won't work, try to update or upgrade your wireless network device driver software. Visit your PC/Wireless device manufacturer's website and look for the appropriate updated driver. If the problem continues after doing all these, then consider buying a new wireless router as your current is deemed broken.

    on Mar 27, 2011 | Computers & Internet

    2 Answers

    What is ment be reflashing a police scanner



    • When police, public safety, etc re-band then some scanners may not pick up the frequencies and you need to update the firmware (when available) to keep your scanners ability to monitor certain frequencies, pairs of frequencies, splinter channels etc.

    • Hope this helps.

    Regards, Tony

    Oct 17, 2011 | Radio Shack Pro-96 Scanner

    1 Answer

    Motorola w388 did not work in Ghana(africa) even though it is unlocked gsm.


    Since Motorola W388 is only a dual-band phone, you would need to make sure that the carrier you want to use the phone on uses the same frequency as what is supported by the phone's hardware.

    Unlock Motorola w388

    Sep 19, 2011 | Motorola Mobility W388 Cell Phone

    1 Answer

    How do you replace/update scanner race frequencies on pro-99 scanner? do i set back to factory specs? i have winn-99 to help for frequencies. is there a web site to download frequencies directly to win 99...


    There's no need to reset the scanner -- entering a new frequency into a selected channel automatically deletes/overwrites the old information. You should be able to download directly from www.RadioReference.com.

    Need the manual for your scanner? You can download and print it, at no cost, here:
    http://support.radioshack.com/support_electronics/doc72/72815.pdf

    Bill B.
    Listening in - professionally - since the 60's

    Mar 11, 2011 | Radio Shack Pro-99 Handheld Scanner

    1 Answer

    Trying to connect to wireless Internet and got error code32002 while updating


    • Change your wireless router's channel to 1 or 11
      Changing the wireless channel on your router may help. Most wireless routers have a channel range of 1 through 11. The best channels to try are usually 1 and 11, as they do not overlap with other channels. Typically, the channel settings for your router will be found in the router's main "Wireless" tab.

    • Where is your wireless router located?
      Move your router away from walls and off the floor and try to place it in a central location in your home. Also, keep it away from metal objects such as metal filing cabinets which can cause interference.

    • Look for other devices
      Noise from cordless devices (cordless phones), or wireless electronics (wireless keyboards, headphones, cell phones), especially those using the 2.4GHz frequency, can interfere with your wireless signal. Also, older microwave models can cause wireless interference. Avoid electronics that use the 2.4GHz frequency, instead look for devices that use the 5.8GHz or 900MHz frequencies.

    Dec 29, 2010 | Nintendo Wii Console

    1 Answer

    No sound on 90 HD Digital Channel


    You need to get in touch with Lg and they will help you. All you need is for them to either post you a usb with software or they can email it to you and you can put it on a usb and put it on your tv via usb port and update the software on your tv.

    The frequency for the new channel is not on your tv but they will give you the software to update so it works.

    Good luck!

    Jul 02, 2010 | LG 47LC7DF 47 in. LCD HDTV

    1 Answer

    Where can i get the channel list for my eurovox EX5100 pvr blue


    Hi, Please try the below mentioned steps: AUTO SORT OFF B4 U MANUAL SCAN A CHANNEL/S: Go into Menu / Installation / Fast Install and press OK (enter pin) Now press the red button on the remote for advanced install Scroll down the options and turn Fav Sort off then press exit (do not press OK) if you press OK all channel order will get sorted back to the default order MANUAL SCAN ALL CHANNEL?S: follow AUTO SORT OFF After you press exit you get a list of frequency?s press red button (update) to update all channels MANUAL SCAN ONE CHANNEL: On the channel that?s scramble press the info button twice and make a note of the frequency at the top left, now follow AUTO SORT OFF when u press exit u get a list of frequency?s scroll down till you get to the frequency you made a note of and press ok to tick the box then press blue button for manual scan else....do a factory reset on the box m8 then rescan for chanells then leave your box on sly sports 1 to update

    May 19, 2010 | Computers & Internet

    1 Answer

    I need to reset the channels for my scanner


    There is no global clear/erase function on the BC350C, but programming2_bing.gif a new frequency on a channel automatically deletes/erases the old frequency. To delete an inactive or troublesome frequency, program "000.0" in that channel. Doing so will deleted the previously programmed frequency and set the LOCKOUT to ON for that channel. For more information on deleting frequencies, see page 27 of your operating manual.

    Need the manual? You can download it here:

    http://www.uniden.com/pdf/BC350Com.pdf

    Jun 07, 2009 | Uniden BC350C Base Scanner

    1 Answer

    BC72XLT


    Here is the directions to store frequencies in your scanner:


    Storing Known Frequencies
    Into Channels

    1. Press Hold. Then enter the channel number
    where you want to store a frequency, then press
    Func and Pgm. The channel number appears.
    2. Use the number keys and to enter the
    frequency (including the decimal point) you want
    to store.
    3. Press E to store the frequency into the channel.
    Notes:
    • If you entered an invalid frequency in Step 2,
    Error appears and the scanner beeps three
    times. Enter a valid frequency.
    • The scanner automatically rounds the entered
    number to the nearest valid frequency.
    For example, if you enter 151.473 (MHz), your
    scanner accepts it as 151.475.
    • When you enter a frequency into a channel, the
    scanner automatically turns on the delay
    function and DLY appears. When delay is turned
    on, the scanner automatically pauses scanning
    Operation 2 seconds after the end of a transmission before
    scanning proceeds to the next channel. To turn
    the function off or on, press Func + Dly.
    • If you enter a frequency that has already been
    entered elsewhere, the scanner sounds an error
    tone and displays the channel that was
    duplicated. If you entered the frequency by mistake,
    press then enter the correct frequency.
    To enter the frequency anyway, press E to
    accept.
    4. To program the next channel in sequence, press
    E then repeat Steps 2 and 3.

    Dean
    Rollin CBs

    Feb 19, 2008 | Uniden BC72XLT Handheld Scanner

    Not finding what you are looking for?
    Televison & Video Logo

    Related Topics:

    175 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Televison & Video Experts

    The Knight
    The Knight

    Level 3 Expert

    74106 Answers

    Cindy Wells

    Level 3 Expert

    5096 Answers

    Electro Med Services...
    Electro Med Services...

    Level 3 Expert

    6694 Answers

    Are you a Televison and Video Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...