Question about YOBO FC Game Console

Open Question

My YoBo gameware remote for the PS3 will not connect to my PS3. i put the USB connect in and turn the remote on and the red light flashes fast and then it slows down to a steady flash. it still does that even when i press the start button and never lights up the number on the top of the control.( controller 1.....controller 2....controller 3 ect.) Are there buttons i need to press to get it to reconize which controller number it needs to reconize? please help me.

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: How to set up yobo controllers for ps3

I just bought a used one today and took me a little while to get it to work. Plug the USB receiver in and turn on the PS3. Press the Mode button and the lights will flash repeatedly at a fast rate (it's searching for the receiver). When it finds the USB receiver, the lights will still flash, but slower than before. When they're doing this, press the mode button again, and that should be all that you have to do. You can also plug the receiver in USB slot one, the charge cable in slot 2, and do the steps to set it up to make it work while charging. (I tried taking the receiver out while charging, and the lights started flashing again so I guess the USB receiver has to be in at all times)

Posted on Mar 07, 2009

  • 3 Answers

SOURCE: where can i find new controlers for yobo fc twin

go on ebay and get an snes controller they work fine

Posted on Mar 09, 2010

rulds2008
  • 3866 Answers

SOURCE: my yobo ps3 controller will not connect to the receiver

You need to change out the battery in this, I feel it may have a dead cell in it thus causing this not to act correctly.

Let me know if you have any questions ether way.

please be considerate to leave some feedback and ratings before you leave, Thanks

Posted on May 04, 2010

jasper1and
  • 1 Answer

SOURCE: How to set up yobo controllers for ps3

1. Power on pS3 Console
2. Turn the game pad switch on. Then press Home button, the 4 LED indicators are flashing simultaneously but slowly
3. Press select plus L3 until the 4 led indicators are flashing quickly
4. Insert the receiver to PS3 console the 4 led indicators are flashing slowly again
5. Press home for connection then the port indicator LED turns to stable and you can start to play

Remarks: Please follow step 2-5 if you are using the controller for the first time. .. for succeeding usage ,after inserting the receiver to the ps3 console, press home button, the controller can automatically be connected.

Posted on Mar 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I sync my gameware ps3 controller with my ps3


Turn on PS3
Turn on controller - press home
press FC button
insert the USB receiver into the PS3
Press home and the port indicator should light up.

Nov 14, 2013 | Video Game Consoles & Games

1 Answer

I Got an speedlink SL-4451-SBK for ps3 and it wont connect


This works: Turn ps3 on. Plug the controller into the usb cable and into ps3. Then plug the dongle into other usb port. After a short time the dongle will flash quickly (this means it's in pairing mode - when the dongle flashes slowly it's too late). Press the PS/Home button as soon as you see the dongle fast flashing. All the LED's on the controller will begin to flash and after a short time one (or two) will remain solid. Immediately disconnect the charging usb lead from the controller and again the LED's will flash, push the PS/Home button again and after a short time one or two will remain solid. The controller should now be working. If the controller fails to respond repeat this process but make sure that you disconnect the dongle and reinsert (so you can see the fast flashing lights and try again).

Dec 02, 2012 | Video Game Consoles & Games

1 Answer

I have a madcatz call of duty black ops controll, it charges when i connect it but wont connect to my ps3? help me!


You need to sync your controller with the ps3, put the USB dongle into one of the available slots on the ps3 - exactly where you would normally connect a wired controller on the front. Now switch on your ps3, the dongle will connect, now put your USB cable into the black ops controller and switch on - your 4 lights should be flashing on the controller. Now press connect on the USB dongle, your controller should now sync to the ps3 and hopefully will show as controller No 1. Remove the USB cable and play wireless.

Jul 13, 2012 | Mad Catz Call of Duty Black Ops...

7 Answers

Gioteck vx1 wireless controller will not pair up to my ps3


This works: Turn ps3 on. Plug the controller into the usb cable and into ps3. Then plug the dongle into other usb port. After a short time the dongle will flash quickly (this means it's in pairing mode - when the dongle flashes slowly it's too late). Press the PS/Home button as soon as you see the dongle fast flashing. All the LED's on the controller will begin to flash and after a short time one (or two) will remain solid. Immediately disconnect the charging usb lead from the controller and again the LED's will flash, push the PS/Home button again and after a short time one or two will remain solid. The controller should now be working. If the controller fails to respond repeat this process but make sure that you disconnect the dongle and reinsert (so you can see the fast flashing lights and try again).

Jan 04, 2012 | Video Game Consoles & Games

1 Answer

I HAVE A GAMEWARE PS3 CONTROLLER BUT HAVE LOST THE INSTRUCTIONS HOW TO ASSIGN TO PS3. PLEASE ADVISE


  1. turn on PS3
  2. Press HOME on GamePad - 4 channel indicators flashing slowly
  3. Press FC on Gamepad - 4 channel indicators flashing quickly
  4. Plug the receiver into the USB port on PS3 - 4 channel indicators flshing slowly
  5. Press HOME on Gamepad, one active channel LED indicator will light up

Jan 08, 2011 | Cameras

5 Answers

YT-9014A1 will not sync


i just sync both of mine to my ps3 it was giving me difficult at first, but i noticed the when u first put in ur usb wireless thing it starts to blink really fast and when u push the p3 button on the controller twice it flashes really fast. so i took out the wireless usb thing then put it back in so the light on it would be flashing really fast like it was searching for somthing, then press the p3 button twice to make the lights flash really fast aswell so it will sync with it. Thats how i got both of my controllers synced we my ps3. the lights on on the wireless usb thing and the controller lights must be flashing fast at the same time to sync.

Mar 06, 2010 | Sony Wireless Controller for PS3

4 Answers

I tried to connect my controller to the ps3 and all it does is it just keeps blinking, help me


Putting batteries in controller
Turn on the PS3
Turn on controller
Press the sync button, the LEDs will flash rapidly
Insert the usb that comes with the controller, the LEDs flash slowly
Press the home button on the remote
READY.

Aug 12, 2009 | Intec PlayStation 3 Turbo Shock III...

3 Answers

How to set up yobo controllers for ps3


I just bought a used one today and took me a little while to get it to work. Plug the USB receiver in and turn on the PS3. Press the Mode button and the lights will flash repeatedly at a fast rate (it's searching for the receiver). When it finds the USB receiver, the lights will still flash, but slower than before. When they're doing this, press the mode button again, and that should be all that you have to do. You can also plug the receiver in USB slot one, the charge cable in slot 2, and do the steps to set it up to make it work while charging. (I tried taking the receiver out while charging, and the lights started flashing again so I guess the USB receiver has to be in at all times)

Jan 11, 2009 | YOBO FC Game Console

6 Answers

Problems connecting a ps3 controller


Here's how to connect it tou your ps3. Mine works perfectly guys.

1. Turn your ps3 off without the USB key given with the controller
2. Make sure your controller is off.
3. Turn on the ps3
4. Turn on the controller
5. Press on the sync. button of your controller.
6. Plug the USB key into one of your ps3's port
7. When the light above your controller starting to flash slower, just pess the home button and your controller will be sync.

You can't turn on the ps3 with this controller. So turn it on manually than press the home button of the controller to turn the controller on.

If my post doesn't solve your problem, I really don't know how to solve it. I managed to connect mine so I hope it'll be the same for you!

Sorry for my bad English folks! You know... french people =S

Jan 03, 2009 | Intec PlayStation 3 Turbo Shock III...

1 Answer

My Nintendo 64 won't work after inserting a RAM expansion.


Use an official expansion pack, for ensured quality.

Dec 25, 2008 | Nintendo 64 Console

Not finding what you are looking for?
YOBO FC Game Console Logo

Related Topics:

597 people viewed this question

Ask a Question

Usually answered in minutes!

Top YOBO Video Game Consoles & Games Experts

Josh Whitehead
Josh Whitehead

Level 3 Expert

1148 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Brad Brown

Level 3 Expert

15441 Answers

Are you a YOBO Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...