Question about Panasonic Audio & Video Receivers

1 Answer

Cd tray is out of sync with servo system is there a diagram for this stereo sa-ak500

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,512 Answers

Hi paindaddi

If the mecha is out of sync with the servo, you may have to disassemble the mechanism, then reassemble to get the whole load assembly back to the fully loaded position, and then fire it up again. Looked on line for a manual to perhaps assist you with this, however, came up empty handed. you're gonna have to pay for one if you really need it.

If you have a some leaning towards mechanical things, with a bit of perseverance, you can fix it without the manual. I can help you with a few tips and pointers.

I am more than happy to answer any other questions you may have about it, just give me a hoy :) If you are still unsure, or have problems, then before you give a rating for this advice, please get back to me and we can try some more things.
Thanks for using FixYa, If you consider the advice I have given you as sound, a FixYa rating is a great reward for my efforts to help you. Cheers.

regards
robotek


Posted on Jun 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

CD function not working on Panasonic SA-HE70 receiver


when you say its not working what do you mean by that?
its got no power.
the tray wont open.
tray trying to open but wont.
or just wont play cd.
if none of the above could you please give me more info please.

Nov 08, 2016 | Panasonic SA-HE70 Receiver

1 Answer

Amplifier - TA-AX380; CD Player - CDP-C40; AM/FM Tuner - ST-JX380; FM Stereo/FM-AM Receiver - STR-AV570X, and Stereo Cassette Deck - TC-W380.....all Sony. Very old system, do not have the manuals, they...


Since you have 2 receivers, you can either use the Sony STR-AV570X or the TA-AX380. You will need 3 Stereo RCA Cables to connect your CD Player, Tuner, and Tape Player. The speakers connect to the receiver you choose using the speaker input terminals.

Here is the diagram (click on picture to enlarge):

pctech1_71.jpg

Jun 22, 2011 | Audio & Video Receivers

1 Answer

I have a Panasonic SA-AK640 mini stereo system and I'm receiving an error message ''CHGR ERR''. The disc tray will not eject. I've tried to power the stereo off and on several different times. What else...


The CD loading mechanism is out of time and has not reset correctly. This cannot be reset. The loading mechanism must be dis-asembled and rebuilt. This is not a DYI repair. Any Panasonic service center can repair this for you.

Dan

Jul 06, 2010 | Panasonic Audio & Video Receivers

1 Answer

Interface SA-DX940 with Sony Vega TV and Magnavox Video Recorder


you need an upscaler for the vision sound will be dolby stereo 2

Dec 08, 2008 | Technics SA-DX940

1 Answer

F61 code coming up on Panasonic CD Stereo system SA-AK640


You gotta change the audio amplifier IC because maybe are on short circuit

Oct 02, 2008 | Audio & Video Receivers

1 Answer

My cd trays are locked and wont open on my jvc stereo model #Ca-Hxd77 system #Hxd77 and i dont know how to unlock it.


Most CD trays have a small hole at front for you insert a straightened paperclip about 1-2 mm inwards. This allows release of tray when power is off. I assume this is what you mean by mechanically locked, not locked by software.

Jul 11, 2008 | Audio & Video Receivers

1 Answer

Jammed CD tray system


You may have a disk that fell out of tray onto lower mechanism. Be careful when disassembling mechanism as they have timing gears that are positioned to perform certain functions

May 06, 2008 | Audio & Video Receivers

1 Answer

The CD changer for my stereo (SA-PM193)jammed when I was changing from one CD to another. It looked like a CD was crooked, and I pulled it out. Then the tray wouldn't go back, so I pulled each tray except...


The CD loading mechanism needs to be rebuilt. Hopefully when you pulled out the trays, nothing was broken inside. Assuming it only needs to be retimed, you can expect to pay the local labor rate. If you broke any of the gears, the parts souldn't exceed $15 or so. Most of the gears and parts are rugged. Look for a Panasonic authorized service center for the repair.
Dan

May 06, 2008 | Audio & Video Receivers

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Audio & Video Receivers Experts

buck wherry

Level 1 Expert

15 Answers

twowheelin
twowheelin

Level 2 Expert

159 Answers

Brad Brown

Level 3 Expert

13561 Answers

Are you a Panasonic Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...