Question about Sceptre X9G-NagaIV 19" LCD Monitor

1 Answer

Green power light flickers and there is no display Model Sceptre X9C-NagaV

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,361 Answers

Look for bad caps with elaking/bulging tops as shown here (it is similar to the X7G which is 17" model).

If you are going to DIY and have proper tools and know safety precaution then please read on:
Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply (they should be replaced in a set), blown fuses; poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed monitors to get some ideas what to look for: http://s807.photobucket.com/home/budm/allalbums
Post back what you see inside so we can guide you further and it will help out other people in the future also.

Basic LCD monitor troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting

http://en.wikipedia.org/wiki/Capacitor_plague
Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.

Posted on Oct 16, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am 80 and living alone...doing OK but people say they cannot hear me. Could you please help me locate the microphone on my SCEPTRE X9W? Thank you


Hello Ron

The Sceptre X9W is a computer monitor with an amplifier and speakers. Unfortunately, it does NOT have a microphone. You would need to buy a cheap microphone and plug it into the sound card on the back of the computer.

The Specifications on your monitor are here.

SCEPTRE X9WG NagaV Black 19 34 8ms Widescreen HD Ready LCD Monitor 300 cd...

You can pick up a microphone like this for 10 bucks at Walmart

Omni Directional Condenser Computer Desk Microphone Walmart com

Sep 02, 2017 | Sceptre Computers & Internet

1 Answer

Cannot use the 5 push-bars on X7G-NagaV to reduce the pink (red in) the background. Do you have instructions for which button to push & the sequence? Thanks


Please check to make sure that the pins on both ends of the VGA cable are OK and seted properly on bothe ends.
There is no adjustment for color casting on the screen (redish, greenish, or bluish cast).
You may have problem in the monitor or the video card.
http://s807.photobucket.com/home/budm/allalbums

http://s807.photobucket.com/albums/yy352/budm/Sceptre%20X7G/

May 09, 2010 | Sceptre X7G-Naga 17" LCD Monitor

2 Answers

My Sceptre LCD TV (X32GV-Komodo0 power turns on


1. check power supply
2. check flyback

Ether or you have a ppower fauilure in the unit. and its probably blowing fuses.

Aug 31, 2009 | Sceptre X32GV-Komodo 32 in. LCD Television

1 Answer

My Sceptre LCD TV Power turns on briefly (blue


Power supply is the place to look, look for bulging on top of the capacitors in the secondary side of the main power supply.

Aug 29, 2009 | Sceptre X37sv-Naga 37 in. LCD Television

2 Answers

Sceptre LCD - no display


It may be the capacitors, since capacitors run about $1.50 or so depending on size you may spend a little over $6 total if you already have soldering equipment or a friend with skills.

Feb 27, 2009 | Computers & Internet

1 Answer

Sceptre X9G-NagaV


I had a word with a technician of these boards, and R88 and C63 are factory removed.

Jan 28, 2009 | Sceptre X9G-NagaIV 19" LCD Monitor

1 Answer

Sceptre x9g nagaV


you cannot connect your vga monitor to your rca vcr its not compatible unless you have a vga to rca converter

Nov 03, 2008 | Sceptre X9G-NagaIV 19" LCD Monitor

4 Answers

Sceptre LCD - no display


I have same problem... just went off warranty and they won't cover it.. they want $100 for repair plus $35 shipping plus I have to pay to ship it to them... For $179 I can buy a new 19" with 3 year warranty...I wouldn't buy another Sceptre at half the price

Jul 13, 2008 | Sceptre X9G Komodo IV 19" Flat Panel LCD...

1 Answer

Sceptre monitor x7g-nagaVI


Problem is 2 Capacitors on the power inverter board, at 1000 uf 16 volt. This one was on the model xg7-naga V 17 inch monitor.

Jan 14, 2008 | Sceptre 17" LCD Monitor

Not finding what you are looking for?
Sceptre X9G-NagaIV 19" LCD Monitor Logo

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sceptre Computers & Internet Experts

Cindy Wells

Level 3 Expert

5218 Answers

Cleverer2

Level 2 Expert

298 Answers

Ricky Ostrom
Ricky Ostrom

Level 2 Expert

274 Answers

Are you a Sceptre Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...