Question about Xerox Phaser 8550DP Printer

2 Answers

No Display There is no LCD display. Light comes on, blinks red, then green, then comes on solid green. NO lcd display at all. Please advise. Rod

Posted by on

  • jonjon17c Jun 04, 2008

    in response to the previous response, does the printer have to be under warranty to receive the free replacement?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

In response to the previous response, does the printer have to be under warranty to receive the free replacement?

Posted on Jun 04, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,072 Answers

Contact Xerox Phaser support at 1-800-835-6100. There is a known problem with that specific display and they will replace it free of charge. Have your machine serial number available when you call, they need to know that information.
They will repair it for you.

Posted on Jun 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My printer is intermec PF8T i have i SAP program to print patient information but it cannot print the error is orange ligths was the error.


There are a few things to figure out here from a SAP basis administrator perspective these steps are common. Also I am just trying to help and with SAP there could be multiple solutions. Good luck.

Check SAP MarketPlace for SAP note: 1557674

Here are the steps taken from the SAP Community Network which might help. I would suggest reading the entire link as its informative. http://scn.sap.com/thread/1975158
Step:
run SPAD
to create an output device, choose Output Devices on the Devices/Server Tab
click on Display now you will be in Spool Administration window
click on Change button then Create tab will be appear, now you have to put the following information.
Under DeviceAttributees
put the Output Device name with shortname
Device Type: SAPWIN
Device class: Standards printer
you can put Model/Location/Message as per concern.
Under Access Method
Access Method: G
Host Printer: __default
save
for more information about
Device Type
http://help.sap.com/saphelp_nwmobile711/helpdata/en/d9/4a910f51ea11d189570000e829fbbd/content.htm
Access Method
http://help.sap.com/saphelp_nw70/helpdata/en/4f/9c033cff903105e10000000a114084/content.htm
(1) Choose "S: Print Using SAP Protocol" if a print server with SAPlpd or SAPsprint is used to print barcodes.
(2) Choose "F: Printing on Frontend Computer" if SAPlpd and SAP GUI are used together to print barcodes, SAP GUI sends print job to SAPlpd, SAPlpd is started automatically and forwards the print data stream to the Windows print manager.
(3) Choose "G: Frontend Printing with Control Tech", only SAP GUI is involved in printing barcodes, SAPlpd is not used.

Here are the Intermec drivers:
http://www.intermec.com/support/downloads/index.aspx

Understanding the LED Indicators
LED Meaning
Green (blinking) Auto-Sensing mode
Green (blinking) Downloading font, form, or graphic
Green (solid) Dump mode
Green (solid) Ready mode
Green (solid) Print mode
Orange (solid) Boot mode
Red (blinking) Media jam, overheated print head or stepper
motor
Red (blinking) Downloading firmware
Red (solid) Error mode

Good luck


Dec 27, 2013 | Intermec Printers & Copiers

1 Answer

Canon mf5650 showing red light blinking on LCD display showing change pape size


I think then you should change the paper. if you are using right paper size then you should check settings.


Mercedes Performance Chip

Aug 17, 2012 | Canon imageRUNNER 1023N Black and White...

2 Answers

Problem with canon ip3300 orange light 5 time is blinking


Hello!
Orange light blinking show your printer has a problem and the error will display on your printer LCD. So check the error number on your LCD and send me the error number correctly. thanks

Sep 12, 2011 | Canon PIXMA iP3300 InkJet Photo Printer

6 Answers

General error in epson stylus t13


HOW TO FIX MY PRINTER, IT DISPLAY A GENERAL ERROR, AND BOTH RED AND GREEN LIGHT IS BLINKING.PLS HELP ME..TNX

Jan 12, 2011 | Epson Printers & Copiers

1 Answer

No display on lcd screen, only solid red light, no


Does the printer print? if yes and the printer is still under warranty, send the printer in for warranty repairs. The interface card may be faulty or the interface robin cable if the printer is printing.

Jul 03, 2010 | Xerox Phaser 6300DN Laser Printer

1 Answer

Printer Model : hp LaserJet 3020 OS : Windows XP(32 bit) Problem : When I did my last firmware update I interrupted by pressing the cancel button on my printer control panel as it showed "Printing...


Never ever touch the printer while upgrading the firmware.
You now need to replace the formatter
  • DO NOT power cycle the printer or the PC during this process or the printer may become unstable and or unusable without further attention from HP . The firmware update can take up to 5 minutes to complete. Please be patient.
  • During the printer firmware update, the liquid crystal display (LCD) on the printer control panel will display "Printing Document" and will change to "Erasing". After a short while, the LCD display will change to "Programming". After a short while, the LCD will display "complete : )" and the "Ready" LED on the printer will be flashing. The printer will automatically power cycle to reboot and will make noises similar to power on.

Jan 28, 2010 | HP LaserJet 3020 All-In-One Printer

1 Answer

Epson CX7450 paper jammed


In some cases, this is cause by a nozzle that got clogged during the jam. You can run head cleaning utility either from the printer or from the computer.

1. Make sure that there are no error lights (red lights), just a solid green light.
2. Take out all cartridges from the printer and put them back in.
3. Once the printer is done charging the inks and you have a solid green light again. Hold down the Ink Button for 3 seconds, after this you'll hear movements within the printer, this is the head cleaning process.
4. Once the printer stops making noises, and you have a solid green light again. Power Off the printer
5. Once the unit is OFF, hold down the paper button while turning the printer ON. Once you see the blinking green light release BOTH buttons. The printer will then print the nozzle check pattern.

* Note: The nozzle check pattern should display all colors in the printer and there should be no gap or break between the lines itself.

6. Do this step 3-4 consecutive times. and that should resolve you concern

Feb 21, 2009 | Epson Stylus CX3200 All-In-One InkJet...

1 Answer

Alert code


What is the message that should be display in the LCD display? The Alert light signals a problem the printer thinks it has and usually display amessage in the LCD display to help a user determine what may or may not need repair or service.

Jan 21, 2008 | Zebra S4M Thermal Label Printer

Not finding what you are looking for?
Xerox Phaser 8550DP Printer Logo

Related Topics:

336 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Printers & Copiers Experts

Whit
Whit

Level 1 Expert

185 Answers

iteminconline

Level 2 Expert

110 Answers

Philip Hughes

Level 2 Expert

63 Answers

Are you a Xerox Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...