Question about HP L1906 19" LCD Monitor

1 Answer

Will not restore after hibernate - HP L1906 19" LCD Monitor

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 732 Answers

Dnjspecialti, Possible "black screen of death" . Connect unit to a known good pc running windows XP. If unit still acts same way then go to this old (2005) blog on web. http://www.lesliewong.us/blog/2005/05/02/hp-pavilion-f1703-flat-panel-display-blackout-solution/ Do a lot of reading and take an asprin or two. Then decide on following options you have open for you.
1. Attempt DIY repair. $5 to $20
2. Contract out the repair. $40 to $90
3. Ask HP if "cash+old unit" swap program available. $35 to $100
4. Just trade-in for new unit. $120 to $250
Research #1 option at FIXYA and YOUTUBE first!!! Only to give you working knowledge of how simple the fix may be to restore unit to working order for possible 2-3 years more service. Do some research on BAD, FAILED, SWOLLEN, LEAKY electrolytic filter capacitors. Then return here to fixya and let us tech's know what you will be doing with unit. If this response was of some help, please rate and leave a comment or reply for other black screen owners to follow. By for now.
12fixlouie

Posted on Oct 15, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Computer wont hibernate


install your motherboard chipset driver first and check it in the power options for hibernate tab. Also post me that you are using windows Xp or vista or windows 7

Jun 08, 2012 | Compaq Computers & Internet

1 Answer

Standby/Hibernate


Have you tried or are able to use system restore to go back to a earlier date before this issue?

May 28, 2012 | HP Computers & Internet

1 Answer

I have vaio vgn-fw390. my lab-top can not hibernate neither in windows nor in linux. i'll thank you if you solve my problem


Try running a system restore and restore your system back to an previous date when your hibernate is working.

Open System Restore by clicking the Start button, clicking All Programs, clicking Accessories, clicking System Tools, and then clicking System Restore.? If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
Note: Before you start System Restore, save any open files and close all programs. System Restore will restart your computer.


Or Try


sometimes the BCD file may have issues.

You can try this to fix the BCD file.


1. Run CMD.EXE as administrator

2. Run the following command: bcdedit -enum all

Look for "Resume from Hibernate" in the output from the command above(example below):

Resume from Hibernate

---------------------

identifier {3d8d3081-33ac-11dc-9a41-806e6f6e6963}

device partition=C:

path \Windows\system32\winresume.exe

description Windows Vista (TM) Enterprise (recovered)

inherit {resumeloadersettings}

filedevice partition=C:

filepath \hiberfil.sys

pae Yes

debugoptionenabled No

3. Once you have found it, copy the value for identifier (in this example - {3d8d3081-33ac-11dc-9a41-806e6f6e6963})

4. Run the following command: bcdedit /deletevalue {3d8d3081-33ac-11dc-9a41-806e6f6e6963} inherit

5. Test hibernation.



May 14, 2011 | Sony Computers & Internet

1 Answer

I have a new Dell laptop. At night I set to Hibernate. Most of the time when I get back to it in the morning, it says that Windows Shutdown Unexpectedly. Thank goodness Explorer will restore what I had...


you might be initiating hibernation and sleep at the same time by closing your laptop screen while it is still going into hibernation. try leaving the screen open until hibernation is complete and the laptop shuts down.

Aug 11, 2010 | Dell Computers & Internet

1 Answer

Hiberation mode ,,what do i do/


Hello,

Hibernate mode is a power saving feature for computers. In hibernate mode, the current state of a computer is saved to the hard disk, and the computer shuts down. A user will have to power on the computer to restore the previous settings. When a computer resumes from hibernate mode, it reads the saved settings from the disk and restores the system state as it was before it entered hibernate mode. By default, hibernate mode is disabled. If a computer is not ACPI-enabled or APM-enabled, users will have to enter hibernate mode manually. Users cannot set the computer to automatically hibernate after a certain time. With ACPI-enabled and APM-enabled computers, users are able to set hibernate mode automatically

How to enable Hibernate:
Please follow this steps below to enable your Hibernate features:

1. Go to Main screen in your windows then right click your mouse to an empty area in your main menu.
2. After clicking the right click please select the properties then go to Screen Saver Tab.
3. Please Click the Button name Power then click the Hibernate Tab.
4. Please check the CheckBox name Enable Hibernation to enabled the hibernation if it is not hibernated.
5. To try test the Hibernate process please follow the steps in How to start using Hibernate below.

How to start Using Hibernate:
Please follow this steps below to active your Hibernate Features:

Make sure all necessary programs are closed prior to shutting down. Hibernating will put all programs to "sleep," but some programs won't start up properly. Experiment after this to figure out which programs perform as intended.
  1. Click Start and Shut Down,
  2. Point the standby button and maintain the shift key pushed,
  3. A new hibernation button appears: click it while still holding the shift key: voila your PC will hibernate.
Thanks

Aug 07, 2009 | Averatec C3500 Tablet PC

1 Answer

Computer is not starting up in standard windows mode. dell media keeps popping up and when i exit the program my pc shuts down. i tried ctrl and f8 it brings me to a short menu. (1) continue restart...


Are you running Window XP? Is your computer set to hibernate? If so, you may have a hibernation error...

If I understand correctly, while pressing F8 during bootup you received a message that states:
"System restart has been paused:
Continue with system restart.
Delete restoration data and proceed to system boot menu"

You may wish to read this article about the error. http://support.microsoft.com/kb/294427

Then, go ahead and do that second option. What hibernate does is write a big file to the HD with the exact state of Windows. That is a "restoration" file. If hibernate doesn't work, deleting the restoration file will often allow the computer to restart normally.


Good luck! Please post back with your results.
If I've managed to answer your question or solve a problem, please take a moment to kindly rate this post....thanks!





Mar 31, 2009 | Dell Inspiron 1420 Notebook

1 Answer

Operating system


If you have a laptop, it has a function called Hibernate. In this, the entire thing that is running, as it is in the RAM, is stored in a place on your hard disk and the PC is shut down. It resumes everything when it is switched on later.
The place reserved on the hard disk is a small thing called 'hibernation.sys' and it is as big as your RAM. If you don't need it, you can delete it through the command line or Disk Cleanup. 
Now, the problem you are in is that the file has been deleted, mostly through cleanup and the system cannot hibernate anymore. I recommend that you use System Restore and roll back the computer to when there wasn't any problem. This won't harm your personal files. Now, remember to uncheck 'Hibernation Files' or similar in Disk Cleanup to avoid deleting it.
Or else, there is another way to restore the file without using the time consuming System Restore. See this.

Dec 13, 2008 | Computers & Internet

1 Answer

How do you get an acer out of hibernation?


If it hangs in hibernation the only way to get it out is to hold the power button down until it shuts off, and reboot. If it continues to hang up in hibernation, do a system restore o system repair with the recovery or operating system disc. If the problem persists after the restore or repair, then you will need to disable the hibernation.

Jul 25, 2008 | Acer Aspire 3000 Notebook

1 Answer

By-pass Hibernation


Instructions: Power off the system and wait a few seconds to make sure that hard drive has spun down. Hold down the "Backspace" key while powering on system. The following message should appear: Warning: Can't restore Hibernated State. Press any key to continue. After pressing a key on the keyboard, the system will continue with the boot process and the hibernation/standby mode will be by-passed.

Sep 07, 2005 | Toshiba e740 Pocket PC

Not finding what you are looking for?
HP L1906 19" LCD Monitor Logo

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Tony

Level 3 Expert

2600 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...