Question about RCA DIRECTV Satellite Remote Control

2 Answers

I need a code so that I can use my bell Canada infra red remote to operate my new rca RLC3210 tv with my bell satellite receiver. I've tried all the codes in the bell receiver manual and none of them work

Posted by on

  • vertolli516 Oct 15, 2010

    I don't feel this is a solution. When I signed up it said I would get a solution. My husband had already made a suggestion like this. I hope I did not pay $18 for this answer

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 712 Answers

Some times, the T.V tuner may not support the remote which you are having. Please cross check if it is so. In that case, you should replace your T.V tuner.

Posted on Oct 15, 2010

  • Sebin Punnacheril
    Sebin Punnacheril Oct 16, 2010

    Kindly refer this site:
    http://www.bell.ca/web/tv/en/all_regions...

    There is a list of codes (about 32 codes) for RCA T.V's in the 3rd column of first page. Any of those codes will certainly work for your model. Hope this can solve your problem.

    Cheers. Thank You.

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

  1. Turn on your TV and VCR
  2. Press and hold the VCR mode button on your remote until all the other mode buttons light up.
  3. Press the POWER button.
  4. Press the Up Arrow button repeatedly until your vcr turns off. (this may take several times)
  5. Press the # button to complete the programming

Posted on Oct 15, 2010

  • Nate Stansfield
    Nate Stansfield Oct 15, 2010


    1. Turn on your TV.

    2. Press and hold the TV mode button on your remote until all the other mode buttons light up.

    3. Press the POWER button.

    4. Press the Up Arrow button repeatedly until your TV turns off.

    5. Press the # button to complete the programming

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have RCA RLDED5099 Tv, but can't program it to work with my Bell satellite remote so I can then work My JVC THA35 home theatre..


Bell Satellite remote codes for RCA TVs: : 001,005,006,008,012,014,015,018,023,
025,035,066,077,085,121,124,131,133,135,
144,148,150,151,152,155,160,167,190,194,
222,223,225,227,232,236,245,248,268,269,
282,288,289,317,431,486, 492

Instructions for when the code for your device is not listed. Use this procedure to scan the remote control’s memory for the device code


1. Turn the device on (TV).
2. Press and hold the mode button until all the other mode buttons light up, and then let go of the button. The mode button flashes.
3. Press POWER.
4. Press the UP or DOWN ARROW repeatedly until the device turns off.
5. Press POUND (#).
6 .Turn the device back on and try some other buttons to make sure they work
7. If necessary, repeat this procedure

How to program my Bell Satellite TV remote control

Apr 09, 2015 | RCA Televison & Video

1 Answer

My remote for my bell 5900 is so worn out that when I press down on the buttons the remote does not work properly. I've tried new batteries and I literally have to wiggle the buttons to change channel


Check the remote control for its infra-red emission. Check it with fresh batteries. Check by pressing all the buttons on it; and see whether all of it generates infrared signal while pressing. If it is found OK, check and replace the infrared sensor inside the TV. If you wish to get some details; check the site linked here. It has details about how to check a remote control; by one among the post. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ If the remote control is found OK; check and replace the infra-red sensor inside the TV. Contact any service technician.

Feb 12, 2015 | Bell Televison & Video

1 Answer

Tv2 remote not working tv1 must be on


It sounds like the RCA cable is plugged into TV 2 ports on the back of the receiver.
Depending upon your receiver, towards the center on the back of the receiver, you have 3 rows of colored (2 - Red, White, and Yellow; 1 - Green, Blue, Red). The RCA for TV 1 should go in the middle row. Please let me know if you have further problems. Thanks.

Dec 16, 2011 | DISH Network IR Remote Control

1 Answer

I am trying to hook my tv up....what settings do I need to watch direct tv???


If you have a Sanyo TV with out audio/video connections, you will be using an RF connection cord between your TV and the satellite receiver. You will operate your TV on channel 3 or 4, match this with the channel 3 or 4 on the receiver box.If your TV has audio/video input connections, you will need to purchase rca connectors. They will have a red connection for right audio, white connection for left audio, and yellow is your video connection. The color codes will be on the input connections on the TV and the satellite receiver as well. You will than program the TV to input one or two, of the TV to receive the signal from the receiver. Use the satellite remote to control channels on the receiver box. When you are through watching TV, be sure to shut off your TV as well. Thanks for asking and show a few hands of support!

Feb 19, 2011 | Sansui Televison & Video

1 Answer

Trying to get the code for RCA tv model RLC3210 to conect to the remote control for Bell Satellite


i had this problem also - however eventually by using the "scan" method rather than trying individual codes i was successful - of course there is no report of the code found

Sep 28, 2010 | RCA DIRECTV Satellite Remote Control

1 Answer

Universal remote has lost it programming and wil not operate tv. I need codes and to know how to enter them into the remote.The tv is a SylvaniaModel 6424TF Please respond. Thanks you Pauline


Hi, I have a few things for you to try.
1. Your TV "6424TF" seems to have problems with its IR "Infra-red" sensor going bad. This is a common problem with your model TV. If this is the case no remotes will work on your TV.
2. Because I do not know the model of your universal RCA remote I cannot tell you how to program it.. please supply the model number of it. Try looking under the battery cover. might be an "RCR..." number. I need to know this because all universal remotes have different codes and programming methods.
3. To know 100% if its your TV that's bad you will need the original remote for your TV. I have already looked up your original remote and you can purchase a brand new replacement that will work right out of the package (assuming your TV IR sensor isn't broke) here: RR0108UD for all sylvania TVs . no programming is necessary for this remote.

Aug 11, 2010 | RCA Universal Remote Control

1 Answer

Codes to program Innovage Products Jumbo Universtal Remote


I need the code for my rca tv so I can program the inovage jumbo universal remote Pleaseeeeeeeeeeeeeeee

Dec 31, 2007 | Televison & Video

Not finding what you are looking for?
RCA DIRECTV Satellite Remote Control Logo

Related Topics:

937 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

matt martin
matt martin

Level 3 Expert

1212 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...