Question about Brother MFC 210C All-In-One InkJet Printer
Howdy there! No problem, happens all the time, I think it is a plot to sell more and more ink..... Please do not think I am brushing you off, but it is a simple reset for the printer. Unplug the printer from the computer and the power source. It takes about 12 minutes to clear the memory and reset the ink levels. Do this and if for some reason it still gives you hassle, please write back and we can go a step further. Thank you so much for the question, it is a pleasure to assist you today.... Guy
Posted on Oct 15, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
May 14, 2011 | Epson CX4400/CX5600
May 05, 2011 | Brother MFC 210C All-In-One InkJet Printer
May 03, 2011 | Brother MFC 240C All-In-One InkJet Printer
Dec 08, 2010 | Brother Office Equipment & Supplies
Your machine is equipped with an ink dot
counter. The ink dot counter automatically
monitors the level of ink in each of the 4
cartridges. When the machine detects an ink
cartridge is running out of ink, the machine
will tell you with a message on the LCD.
The LCD will tell you which ink cartridge is low
or needs replacing. Be sure to follow the LCD
prompts to replace the ink cartridges in the
Even though the machine tells you that an ink
cartridge is empty, there will be a small
amount of ink left in the ink cartridge. It is
necessary to keep some ink in the ink
cartridge to prevent air from drying out and
damaging the print head assembly.
a Open the ink cartridge cover.
If one or more ink cartridges are empty,
for example Black, the LCD shows
Ink Empty Black and
b Pull the lock release lever down and
take out the ink cartridge for the color
shown on the LCD.
c Open the new ink cartridge bag for the
color shown on the LCD, and then take
out the ink cartridge.
d Remove the protective yellow cap (1).
If the protective yellow caps come off
when you open the bag, the cartridge will
not be damaged.
e Each color has its own correct position.
Insert the ink cartridge in the direction of
the arrow on the label.
f Lift each lock release lever and push it
until it clicks, and then close the ink
g If you replaced an ink cartridge, the LCD
may ask you to verify that it was a brand
new one. (For example,
Did You Change Blck?) For each
new cartridge you installed, press 1
(Yes) to automatically reset the ink dot
counter for that color. If the ink cartridge
you installed is not a brand new one, be
sure to press 2 (No).
If you wait until the LCD shows
Near Empty and Ink Empty, the
machine will automatically.
Find this on page 113 of the manual:
Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response.
Dec 04, 2010 | Brother MFC-5460CN All-In-One InkJet...
Sep 30, 2010 | Epson Stylus Multifunction Inkjet Printer/...
Mar 25, 2010 | Brother IntelliFax-2480C Fax
Feb 05, 2010 | Brother MFC-5460CN InkJet Printer
Oct 28, 2009 | Epson Stylus C20SX InkJet Printer
Oct 14, 2009 | Brother Multi-Function Center MFC-240C...
236 people viewed this question
Usually answered in minutes!