Question about GPS

1 Answer

Radio says LOC need code a number showed up 662671

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,800 Answers

You need the safety code - it's used as an antitheft deterrent.The code is always written on the user manual that came with the radio, along with the instructions on how to input it.
If you no longer have the manual but still have a proof of purchase then you must go to either the dealer (if the radio is a factory install) or the support section of the site of the radio's manufacturer, provide the serial - 662671 - and for a small fee(or for free in the case of a lot of sites and dealers) they will give you your safety code.
If you can't do even that then you are left with only one option - an code retrieval site like
http://www.radio-code.co.uk/
But i must warn you that these sites are illegal in a lot of countries so beware, use it at your own risk.

Posted on Oct 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to how to unlock car radio 2008 Chevy Impala


Requirements
The theft lock radio must be in "LOC" mode.

Procedure:
1. Turn the ignition ON (The radio should display "LOC")
2. Hold down the Radio Presets 2 and 3 buttons for six seconds
3. The radio display changes from LOC to a three-digit number. Write this number down. You now have fifteen seconds to complete the next step.
4. Press the AM/FM button
5. The radio display changes to another three-digit number. Write this number to the right of the first one.
6. You now have a six-digit number, the first three digits are from STEP 03 and the last three digits are form STEP 05
7. Call 1-800-537-5140
8. Press 1 then # (pound). You'll hear "Invalid Code, try again"
9. Press 139010 or 106010 or 206010 or 202107 then # (pound). You will be asked to enter your four or six digit code followed by *
10. Enter the number from STEP 6 then *
11. Listen to the four-digit number and write it down. It will be repeated twice
12. Turn the ignition ON (The radio displays LOC)
13. Use the MN and HR buttons to enter the code from STEP 11
14. Press the AM/FM button. The radio display changes to "SEC". Your radio is now "un-locked" and usable.


Dealership Codes
  • 139010
  • 106010
  • 206010
  • 202107
Troubleshooting
If you fail to enter the correct code eight times, the radio goes into INOP mode. You have to wait an hour with the ignnition on before the radio returns to LOC mode.

Aug 14, 2015 | Cars & Trucks

1 Answer

I need the radio code for a 2000 ML 450 bought used and code card is not available. the vin # 4JGAB72E5YA179735


Hi,
According to your requirement you have to purchase radio code or you can use car radio decoder software to decode your car radio. If you have experienced a dead battery, disconnected the factory radio harness or disconnected the battery to the vehicle then you must need radio code. Better to purchase a radio code. Before purchase determine of your radio type and do the following steps. The radio must be in LOC mode NOT in INOP mode. Turn the ignition ON. Press and hold presets buttons 2 & 3 or 1 & 4 for approximately 10 seconds. The radio display changes from LOC to a three-digit number. Write this number down. You will then have fifteen seconds max before the next step must be performed. Press the AM/FM button. The radio display changes to another three-digit number. Write this number to the right of the first one. You now have a six or four-digit number, the first three digits are from STEP 3 and the last three digits are from STEP 5. If you have a four digit number, it will show all four digits at the same time. Then purchase the code mentioning your car model and unlock the radio. You can purchase your code from radio-code.com by credit or debit card.

Sep 03, 2011 | Car Audio & Video

1 Answer

Radio lock code how to reset


turn ign on.radio must be in loc mode.hold down preset buttons 2 and 3 for 6 seconds.radio will change from loc to a 3 digit number.write this down you have 15 seconds to complete the next step.press the am-fm button radio will change to another 3 digit number.write this number to the right of the other numbers.call 1-800-537-5140 press1 then #(pound) you will hear invalid,try again.press 139010 or 106010 or 206010 or 202107 then # (pound) enter your 6 digit code followed by *(astric) listen for the 4 digit number and write it down.it will repeat twice.turn ign on radio should display loc.press mn and hr button and enter the 4 digit code.press am-fm radio should display sec it should now be unlocked. i think you need the number 106010 then #(pound) if not try all the numbers.

Jan 27, 2011 | 1995 Pontiac Sunfire

1 Answer

I need the radio unlock code for a 98 grand prix


The following instructions will allow you to reset any GM (General Motors), Cadillac, Oldsmobile, Buick, Pontiac theft lock radio.

Requirements: the theft lock radio must be in "LOC" mode.

Procedure:
1. Turn the ignition ON (The radio should display "LOC")
2. Hold down the Radio Presets 2 and 3 buttons for six seconds
3. The radio display changes from LOC to a three-digit number. Write this number down. You now have fifteen seconds to complete the next step.
4. Press the AM/FM button
5. The radio display changes to another three-digit number. Write this number to the right of the first one.
6. You now have a six-digit number, the first three digits are from STEP 03 and the last three digits are form STEP 05
7. Call 1-800-537-5140
8. Press 1 then # (pound). You'll hear "Invalid Code, try again"
9. Press 139010 or 106010 or 206010 or 202107 then # (pound). You will be asked to enter your four or six digit code followed by *
10. Enter the number from STEP 6 then *
11. Listen to the four-digit number and write it down. It will be repeated twice
12. Turn the ignition ON (The radio displays LOC)
13. Use the MN and HR buttons to enter the code from STEP 11
14. Press the AM/FM button. The radio display changes to "SEC". Your radio is now "un-locked" and usable.

If you fail to enter the correct code eight times, the radio goes into INOP mode. You have to wait an hour with the ignition on before the radio returns to LOC mode.

Hope this helps; keep in touch.

Dec 17, 2010 | 1998 Pontiac Grand Prix

1 Answer

2000 Malibu: 2000 chevy malibu car radio reads loc and we need ...


if this is a factory radio, then you can go to dealership, to get unlock code for your radio. i think you may need the vin number.

May 18, 2010 | 2000 Chevrolet Malibu

1 Answer

My 99 Pontiac Grand Am's radio is on Loc. I have the 2 codes but I don't know what to do now?


turn ignition switch ON but leave stereo OFF---press MN button and OOO should appear -----press HR button to make the last two numbers match your code then release button ---press hr button until the first one or two numbers match ur code ----press AM/FM SEC should appear indicating the radio is unlocked if LOC shows up either took longer than 15 seconds between entering codes or wrong code entered --u r allowed only 8 tries after that radio becomes INOP and dealer is only one able to reset

Jan 21, 2010 | 1999 Pontiac Grand Am GT

1 Answer

I need radio code for a chevy s10


Re: Radio Locked The following procedure will give you a new code that you can use instead of your personal code. Using this new code, you can “unlock” your radio and then “re-lock” it with a new code if you wish. Prerequisites: The radio must be in LOC mode NOT in INOP mode. Let me explain. If you have activated the Theft-Deterrent feature of your radio and loose power, the radio goes into LOC (theftlock) mode. With the ignition on, you must use the MN and HR buttons to enter you personal code in order to unlock it (The instructions are on page 3-27 in your Y2K Owner’s manual). If you fail to enter the correct code eight (8) times, the radio goes into INOP mode. You have to wait an hour with the ignition on before the radio returns to LOC mode (go for a long drive somewhere).

Procedure:

01. Turn the ignition ON (The radio displays LOC)

02. Hold down the Radio Presets 2 and 3 buttons for six seconds

03. The radio display changes from LOC to a three-digit number. Write this number down. Don’t take forever, fifteen seconds max before the next step.

04. Press the AM/FM button

05. The radio display changes to another three-digit number. Write this number to the right of the first one.

06. You now have a six-digit number, the first three digits are from STEP 03 and the last three digits are form STEP 05

07. Call 1 800 537 5140

08. Press 1 then # (pound). You’ll hear “Invalid Code, try again”

09. Press 139010 then # (pound). You will be asked to enter your four or six digit code followed by * (start)

10. Enter the number from STEP 6 then * (star)

11. Listen to the four-digit number and write it down. It will be repeated twice

12. Turn the ignition ON (The radio displays LOC)

13. Use the MN and HR buttons to enter the code from STEP 11

14. Press the AM/FM button. The radio display changes to SEC Your radio is now “un-locked” and usable. The Theft-Deterrent feature is STILL active! If you want to disable it, use the instruction in your Owner’s manual. Use the code from STEP 11 instead of your personal code

Dec 03, 2009 | Car Audio & Video

1 Answer

1998 GMC Radio Code Radio display shows LOC Code unknown and previous owner cannot be contacted.


Call the dealer with the vin number to the vehicle some require the serial number off of the radio itself. They can get you the radio code for the truck. It will not cost you anything.

Sep 29, 2009 | 1998 GMC Sierra

2 Answers

Radio


You can drive to the dealer and have them help you enter the code since they are alway's connecting and disconnecting battery's, The instructions are in the manual and the codes might be written in the front or back page. If no codes were programed try 0000 and see if that works. IF the dealer wants to charge you a crazy amount, you can get your codes here on www.radio-code.com Good luck and hope this helps.

Jun 03, 2009 | 1993 Chevrolet Astro

1 Answer

Radio is in LOC mode


hold 2 and 3 or 1 and 4 depending on the model. Then i t should show three numbers, after u have written these down press the am fm button and wait for 3 more numbers then there is a number you have 2 call to get ur code and u will have to enter ur six digit code and it will give u ur unlock code. one moment and i will try to get the #

Jan 31, 2009 | 1999 Buick Regal

Not finding what you are looking for?
GPS Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top GPS Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

The Knight
The Knight

Level 3 Expert

74106 Answers

kakima

Level 3 Expert

102366 Answers

Are you a GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...