Question about InFocus User guide, LP500 / 530 Projector Lamp

1 Answer

When i turn my LP500 the green light automatically starts blinking and you can hear the fans turn on. It remains blinking for a few minutes as the lamp tries to kick on and you can still hear the fans firing up. after a few minutes a red blinking light comes on and everything else shuts down. The lamp that came with the projector is a 2000 hr lamp and is not even close to being burnt up, but i thought maybe that was the problem so i went ahead and purchased a brand new bulb and the projector is doing the same thing. Any recommendations or suggestions?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,382 Answers

Hi, according to the User's Guide, after 2000 hours the lamp will not light and when this happens, the lamp is burned and the LED should be blinking red. You have to reset the after changing the lamp with the projector monitor closed, press and hold the volume button. Then press the source button. Hold both buttons down for 10 seconds and it will reset.

Since you have changed the bulb and the red light is still blinking, then the lamp Ballast power supply is faulty.

Posted on Oct 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TV turns itself off after about 5 minutes (green light remains on). I can turn off the TV and turn it back on immediately, however, the TV turns itself back off after a few minutes. It started turning off...


Check and make sure your fans are working and there is sufficiant cooling to the back of the set. Sounds like it is overheating and going into protection mode.

May 04, 2011 | Mitsubishi WS-65513 65" Rear Projection...

1 Answer

My Sony KDS-60A2000 is 41/2 years old. About 2 weeks ago I could not get the tv to power up. the green stand by light just kept blinking. I powered off, then powered up again and the tv started and and...


Hi,
TV needs lamp replacement as existing lamp got weak or has been reached to end of its working life, please note that lamp is not dead or broken so that is why lamp lit is not lit at tv front.
Hope these info will help you.
Thanks.

Nov 03, 2010 | Sony KDS-60A2000 60" HDTV

1 Answer

Hi. I've had my InFocus LP500 projector for about nine years. Twice its power supply has been replaced (usage) but never its lamp. The projector has been used regularly, handled with care and cleaned from...


i was thinking of a different model, but I'll be honest, if you are sure your lamp is good and ALL of the fans are on, then it probably is the power supply acting up again.

Mar 28, 2010 | InFocus User guide, LP500 / 530 Projector...

1 Answer

My PS3 tries to turn on... but won't


Generally its an overheating Problem send it back to Sony to fix

Mar 19, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

Vizio P50HDM No Picture/No Sound


this is most likely the sustainer board(s) problem. Replacing the sustainer boards should correct this problem for you. you can get the parts at vancebaldwin.com

May 29, 2009 | Vizio P50HDTV10A 50 in. Plasma HDTV

1 Answer

I turn on the 4805,green led blinks & bulb does not come on?


After a few minuets does the green blinking light turn to a red blinking light?

If so the problem is the lamp did not strike.Either the lamp has failed (most likely) or there is a problem with the power supply (less likely)

Feb 12, 2009 | InFocus ScreenPlay 4805 Multimedia...

1 Answer

Wont turn on


I have the same problem. When I push the green button nothing comes on - just the green LED keeps blinking.....could you manage to find the solution

Sep 28, 2008 | InFocus User guide, LP500 / 530 Projector...

2 Answers

Sony LCD television will not power on.


I get 5 blinking red lights for about a minute or so before it powers back down. The Sony TV has a specific light that i presume is supposed to light up when the bulb is out. I'm unsure if this is what it is.
no picture, no sound. tries to boot with green light blinking a few times. then goes to red blinking light, six in all, then waits a few moments, then another 6 blinking red light.
Bulb was already replaced several months ago but we do have the TV on for long periods of time.

Jan 15, 2008 | Sony Grand WEGA KF50WE610 50" Rear...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

363 people viewed this question

Ask a Question

Usually answered in minutes!

Top InFocus Office Equipment & Supplies Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

The Knight
The Knight

Level 3 Expert

74106 Answers

color wheel light...
color wheel light...

Level 2 Expert

138 Answers

Are you an InFocus Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...