My cable tv, internet service and phone service is thru brighthouse. when house phone rings, the call interrupts my internet service and causes me to loose my internet connection. I took the linksys router out of the equation and connected up to the modem, and phone calls did not interrupt the service. I have isolated it to possibly the linksys router. I am not sure what filters to turn on, or how to configure linksys. any help would be appreciated.

If you have roadrunner, it's being provided by your local cable company, probably Time-Warner of Brighthouse. Call your provider and tell them you no longer want the service. The service isn't cheap. If you never used it they made a lot of money for doing nothing. and they didn't need or deserve it!
They should be able quickly turn it off.You may or may not have cable tv from them also. You can cancel one and keep the other. I have Roadrunner provided by Brighthouse but I use Directv. You will have to return any company owned equipment related to internet service.

The ps3 was not designed for use on a dial-up internet connection. I'm afraid you will need a dedicated internet connection like cable internet or a 2nd phone line.

The first symptom of an incoming call ringing once then stopping is called trip and ring which is caused by a partial short on the phone line. The second symptom is called crosstalk caused by the two phone lines being shorted to each other. The service provider is most often the cause of these troubles. Often this type of trouble happens during wet weather or shortly after. The third symptom of static on the line cna also be caused by the same conditions. All three symptoms are likely caused by the same trouble from the service provider. Advise you report the trouble to your service provider.

The remotes have several device keys at the top of the remote. They have abbreviations like "VCR", "DVD", "TV", "CBL". By default some actions are locked into a specific key. By default, the volume buttons will always control the TV volume and the channel buttons will always change channels on a digital box.
If you have a digital box, and the channels wont change, the default locks might have been removed. Consult the instruction manual that came with the remote and re-lock the buttons to the correct device key. Otherwise you will need to press the "tv" button when trying to change volume and the "cbl" button when trying to change channels.
If you do NOT have a cable box and are just simply trying to use the universal remote as a primary remote, you will need to unlock the global channel lock. Consult the manual for the remote or check online for the remote guide. The Company which makes the remotes is called Universal Electronics and you can find digital copies of their manuals on the Brighthouse Websites.

Hi,
This is a brighthouse problem not a TV problem, if brighthouse won't help you just use the original or substitue remote.
The brighthouse remote may locate the correct frequency using the scan method ask them to send a remote book.
Thanks
Roety

If your tv has inputs for many devices you can connect them. You need to simply change the tv input SOURCE to whatever #/type of input you want to view from.

You can use an y remote if programmed properly- that is another issue. programming the remote to control that deviovce but first see if it works right.

if the brighthouse remote can control the tv, change the input or source to whatever the dvd is in, other wise try the tv remote.

make it simple first, then you can try getting the one remote to control it IF it can.

my cable remote cannot control all my devices but does the tv.

check the splitter and make sure your phone is connected to "phone" and internet is connected to "DSL or DATA. our neighbor has the same problem and when i checked the splitter, the phone is connected to "data" port.

Do what I did...
Turn on TV
Press TV on the remote(will blink once)
Press and hold setup until tv button blinks twice
Hit 991 tv key will blink twice
Aim remote at tv press power button once
Press the Chan + key over and over until tv shuts off.
Same instructions as the manual

First I'll assume that you have wireless broadband internet access. In which case the interruption is caused by your cordless phone. Cordless phones are usually 2.4 Ghz now and so are routers. Operating on the same frequency causes interference between them. Get a phone that is not 2.4 Ghz.

If you have dial-up internet access, then this is most likely caused by your dial-up connection being interrupted. Any time someone tries to call you this will happen unless you call your phone company and they can help you take the proper steps to make sure that this doesn't happen (usually that means they'll tell you how to disable call waiting).

brighthouse remote code for panasonic amolifier to adjust volume