Question about HP Photosmart C7280 Printer
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
try resetting the printer using the # and the number 6 buttons,holding them down and then inserting the power cord at the back of the printer..its a known issue with the HP printers.
you can also follow the follow the link..
In case it doesnt you can always contact a free online technical
support with an online live techbuddies technician at
Posted on Jun 20, 2009
SOURCE: ink system failure
I found this I know your error not in here but it may work for
It worth a try nothing to lose and it may work.
I know your error code is not in this but it some times it clean the error with this type of error number you can gave it a go try not harm it
Error code: 0xc18a0201, 0xc18a0206, 0xc18a0306, 0xc18a030a, 0xd0620130, 0x887dd03a, 0xd05d010d, 0xf0af8004, 0xc19ac3ff, 0xc18a050...
Reset the product:
1. Without turning off the product, disconnect the USB cable from the rear of the product.
2. Remove the cartridges from the product.
3. Wait for the 'Insert Cartridges ' message to display on the control panel.
4. Disconnect the power cord from the back of the product.
5. Wait 60 seconds.
6. Reconnect the power cord. If the product does not automatically turn on, press the Power button ( ).
7. Reinsert the cartridges, and then close any open doors on the product.
8. If you receive a prompt to print a calibration page, do so.
9. Reconnect the USB cable to the rear of the product, and then try printing again.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
Posted on Feb 08, 2010
Tips for a great answer:
Feb 13, 2013 | HP Photosmart C7280 Printer
Jun 16, 2011 | HP Photosmart C7280 Printer
Photo tray problem
' Lift the output
tray up and verify that the photo tray ' is pushed in until it stops, then lower
output all the ' way down. Press OK
button on the printer to 'continue printing
' Lift the output
tray up and verify that the photo tray
' is pushed in until it stops, then lower
output all the
' way down. Press OK
button on the printer to
HP Photosmart C7280 All-in-One Printer
1. Turn off printer.
2. Pull out paper
tray and photo tray
3. Remove output
duplexer (on back of printer)
4. Open input sheet
feeder (on top of printer)
5. Open cartridge
access door. (Basically lift up control panel and scanner section of the
6. Turn on printer
(Power button on now raised control panel)
7. Printer may
display message "Performing printer alignment - Do not interrupt"
8. Wait for a few
minutes until printer stops making all setup noises.
9. Close cartridge
access door, close input sheet feeder, replace output duplexer, insert paper
10. Do a test print. All should be fine.
Mar 11, 2011 | Office Equipment & Supplies
Nov 11, 2010 | HP Photosmart C7280 Printer
Jul 06, 2010 | HP Photosmart C7280 Laser Printer
Jan 13, 2010 | HP Photosmart C7280 Laser Printer
Jan 01, 2010 | HP Photosmart C7280 Printer
Nov 16, 2009 | HP Photosmart C7280 Printer
Jun 20, 2009 | HP Photosmart Pro B8350 InkJet Printer
Mar 30, 2009 | HP Photosmart C3180 All-In-One InkJet...
113 people viewed this question
Usually answered in minutes!