I have a Salton double glass carafe coffeemaker DS-16 and have not used it for quite a while. What kind of filter does it use?

There are several solutions, I will give you some links:

Amazon com glass thermal carafe

salton glass coffee carafe

coffee carafe replacement Shop411 com

Salton Carafe Sale Up To 70 Off Salton Carafe Compare and save compare99...

There are a lot more you can find.

Try Online I will include several links:



Salton Carafe Sale Up To 70 Off Salton Carafe Compare and save compare99...

salton glass coffee carafe

Amazon com glass thermal carafe

REPLACEMENT CARAFE SALTON Price Comparison

I also did not find just the carafe...But here's a link to the entire unit on eBay... http://www.ebay.com/itm/Salton-TT8W-Cordless-Electric-Kettle-1-7L-W-Warming-Tray-And-Tea-Filter-Carafe-/291276464852

and another site...http://appliances-smallkitchen.com/itemsearch/?s=carafe-salton-tt8w

They are both $60, which I assume is more than you want to spend for just the carafe.

The good news is there is nothing wrong with your coffee maker!

With any coffee maker that heats up the water, you're going to lose some of that water to the heating process (steam, etc.). You also don't get every bit of water out of the machine.

So that's why you need to look at the water reservoir level indications instead of using the graduations marked on the glass coffee carafe.

Typically, once you've figured out how you coffee maker works, I'd just "add" 2 more cups of water in the glass coffee carafe to get the amount of cups you want to brew.

I know my coffee maker is pretty close to exactly 2 cups shy of whatever I put in the glass carafe that I pour into my coffee maker. That's when I noticed the markings inside the water reservoir that didn't match the coffee pot. It was always 2 cups shy, so I just put 8 cups of water (using the carafe) to get 6 cups in the morning.

So I suggest you just you make these small adjustments to your water measuring and you'll get the right amount of brewed coffee out of your machine!

Hope you find this Very Helpful and best regards!

If you are still looking for the espresso carafe for the Salton EX-99, I have a white one with the matching lid available. I can be reached at [email protected]. If I don't hear back from you in the next day or so, it's going to Ebay. Thanks!

Make sure you are not using a paper filter and a gold tone filter at the same time.

Make sure the carafe lid is down all the way and that the center knob of the carafe lid is making contact with the spring at the bottom of the filter basket.

If the above conditions have been met, then decalcify your coffeemaker by running 1/3 carafe worth of vinegar and 2/3 carafe worth of water through your coffeemaker - use the self-clean button to do this - will take about 35 minutes.

Make sure you are not using a paper filter and a gold tone filter at the same time.

Make sure the carafe lid is down all the way and that the center knob of the carafe lid is making contact with the spring at the bottom of the filter basket.

If the above conditions have been met, then decalcify your coffeemaker by running 1/3 carafe worth of vinegar and 2/3 carafe worth of water through your coffeemaker - use the self-clean button to do this - will take about 35 minutes.

Welcome to Fixya! I will provide the best solution that I can to ensure your satisfaction. I would appreciate a good rating if you feel it is warranted.

Toastmaster is a Salton brand and I was able to get contact information for you to order your replacement carafe.

Parts & Accessories:
Phone: 1-800-738-0245 (Monday–Friday, 8:30 a.m. to 8:00 p.m., ET)

Thanks again for allowing me to assist you.

Welcome to FixYa! I hope my solution will help you get the information you need. If so, I would appreciate a FixYa rating, which is our highest form of recognition for good work. The coffeemaker is a Salton brand. You will be able to order the part you require.

Parts & Accessories:
Phone: 1-800-738-0245 (Monday–Friday, 8:30 a.m. to 8:00 p.m., ET)

Thanks again for allowing me to help you and thanks for using FixYa!

Hi,

Here is information about the Salton, Inc. customer servicesite for replacement parts or manuals. If they don't have them, they should knowwhere to send you (though if they don't, I'd seriously wonder about thecompany).

Go to

http://prc.prodregister.com/prodprotect/applica/

And click on "George Foreman" (lower-right portion of the page), it redirects you to a secure webpage where you can register.

https://secure.prodregister.com/prodprotect/applica/gf.shtml

Part of the page reads:
"Call toll-free or visit our websites for assistance if you need more help.

Parts & Accessories:
Phone: 1-800-738-0245 (Monday–Friday, 8:30 a.m. to 8:00 p.m., ET)

Product Warranty:
Service: 1-800-231-9786 (Monday-Friday, 8:30 a.m. to 8:00 a.m., ET)"

If I can be of further assistance, let me know. If this helps or solves the issue, please rate it accordingly.

Thanks in-advance for using Fixya.com,

Jon