Question about Uniden UDW10003 Wireless Portable Video Security Surveillance System

2 Answers

I cant tell what windows vista program I have. Are they different? The comptuer cannot find driver software for the device. I installed the software fine, but it says the receiver is not connected. A box pops up and says: C:\\Windows\system32\mr8980if.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support. I have uninstalled and reinstalled the software three times.

Posted by on

  • ecole237 Oct 14, 2010

    I was rereading the Uniden handbook and it says that I need Microsoft DirectX9 compatible display driver. Is there are way to tell if I have that?

  • ecole237 Oct 14, 2010

    The comptuer cannot find driver software for the device. I installed the software fine, but it says the receiver is not connected. A box pops up and says: C:\\Windows\system32\mr8980if.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support. I have uninstalled and reinstalled the software three times.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

There are different versions. Usually when download drivers, it just needs to be vista. There is vista home, vista preimum, vista office, vista ulitmate.
There label on our pc should say. Or go to my computer, right-click and go to properties and it should tell you there as well.

Posted on Oct 14, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Uniden Master
  • 6,993 Answers

Hello,

first, you can tell what windows vista program you are having by doing this; Right click on "My Computer", scroll down to "Properties and click on it. Your system information will pop out. At the top of the page, you will see "Windows edition", from there you will see your vista edition.

Second, there are different Vista programs, we have Vista Home Basic, Vista Premium, Vista Ultimate, and so on.......

I would suggest you test the driver on another windows vista computer, maybe on a friend's computer and observe if it will show the same error. If it does, then know that the driver your are trying to install is corrupt whether its a new one or not.

Lastly, it might also be that, its not compatible with your operating system for real. Testing it on another vista computer will reveal this.

Good luck.

Posted on Oct 14, 2010

  • Walesarumi
    Walesarumi Oct 15, 2010

    Hi, I'm sorry I didn't reply on time.

    Its difficult to know whether or not direct x9 is already installed on your computer. You can as well install direct x9 afresh on your computer.

    To install direct x9 go to

    >http://www.oldversion.com/
    >Under utility, click Direct X
    >Select direct x9
    > Proceed for the download

    God luck.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a ezonics web cam and i cant get the drivers free


Click start control panel view devices and printers you should see your webcam from there if you are have trouble with your webcam Click start control panel administrative tools computer management device manager scroll down image devices you could see a yellow question mark? right click to reinstall drivers or update driver xp Click start right click on computer select properties device manager scroll to image devices expand right click to update driver in W7 http://download.cnet.com/2000-20_4.html on the home page you should see a search tab just type in what you are looking for IE: webcam name webcam driver you might have to try a few times to get it right software if you dont have the driver you will need to download one here rather doing a driver hunt which can take hours http://download.cnet.com/slimdrivers-free/3000-18513_4-75279940.html Windows XP/Vista/7/8 It might take some time being a freeware driver solution note: it will find all of your outdated drivers this is a free driver solutions This will automatically search for and find the correct driver you will have to update every driver individually once you update you might be asked whether you want to restart or make a system restore point click no to both of these then continue updating each driver free then restart once all of the drivers have been updated Some webcams and programs require additional software, although that should be installed with the webcam if things are right. But is does not harm to check if your Java, Flash and Quicktime software are installed and up to date. But certainly check your DirectX software, since all video applications, including webcams, use DirectX for video processing. Try downloading the latest DirectX version and install it (Windows XP: DirectX 9.0c - Windows Vista: DirectX 10). http://windows.microsoft.com/en-US/windows7/Which-version-of-DirectX-is-on-your-computer Hope this helps.

Jan 02, 2013 | Ezonics EZ Computers & Internet

1 Answer

When i install the driver for lenovo y510, the message appears"windows cannot install the software for Image, ask your hardware vendor for assistance" please tell me what is the prblem with my...


what is your os??
check the device manager is there any webcam installed
if you use win 7 the driver or software from the y510 cant be installed on it so take another software like cyberlinkucam because the software and driver fr win vista

Jan 14, 2011 | Lenovo IdeaPad Y510 Notebook

1 Answer

My web cam is showing a black screen i dont know what to do i have windows vista


How to troubleshoot Webcams in Windows Vista?

If you are having difficulty getting the webcam to work, review the tips about using a webcam, and then follow the troubleshooting actions in this article.
Tips:
  • Do not enter standby and then wake the system immediately, before the power light turns yellow. If so, the webcam may not function correctly until the computer is restarted. To avoid this issue, allow the system to fully enter standby before waking up the system.
  • If you installed the webcam separately (it did not come with your Vista PC), make sure the webcam drivers and software are compatible with Windows Vista.
  • If you are using an external webcam, make sure you install any webcam software from the CD before you plug the webcam to your computer. Without the software, the webcam may not be recognized by your computer and this can cause error messages.
  • If the display is blank, the camera may have timed out. Turn the camera on again.
  • If the camera does not display Connected to computer, disconnect and then reconnect your camera.
  • Make sure the camera is set to Digital Camera in USB Configuration when trying to download images through some software.
  • Test your webcam in a different application to confirm if the issue is specific to that application. If the webcam functions properly in a different application, then contact the manufacturer of the video software for the latest drivers and for specific troubleshooting instructions.
  • If you have an external webcam, test it on another computer. If it functions properly on a different computer that has the same operating system, then you may need to install hardware drivers for your computer to work with the webcam.
  • If an external webcam fails to work on several computers, your webcam may be defective. Contact the webcam manufacturer for specific diagnostic information and troubleshooting instructions.
  • Your webcam may not work properly across some network firewalls. If you have trouble viewing or sending video to someone on another LAN or outside the network firewall, refer to the support information for the firewall or contact a network administrator for assistance.
  • Dial-up Internet connections often lack the data transfer capacity to handle both video and voice simultaneously. A broadband Internet connection is highly recommended for video messaging. Performance varies with dial-up connections.
  • For the best webcam experience, close all other applications and background tasks, and limit your Internet browsing or streaming to preserve bandwidth.

Step 1: Close all software before starting a new webcam session
Sometimes after you finish using the webcam in a software program, the program may not properly release the webcam for other activities in other applications, or even the same application. Sometimes you cannot use the webcam because it is being accessed by another program by default. So, if you are having a problem with your webcam, close the program you are using it in and then restart the same program or open a different program.
Step 2: Restart your PC
Sometimes, closing the software application that was using the webcam is not enough. Some webcam software cannot close the webcam for other applications to use later. When this happens, the webcam cannot be used by any other application until the computer is restarted.
Step 3: Select the webcam in your video viewing software list
Make sure USB 2.0 Camera or your Webcam is selected as the video input source in the software you are trying to use. The various software programs that can use the webcam use different terms for describing a video source and the option to select it can vary. Usually, camera, webcam, or video settings can be found in the preferences or properties pages for the software that uses the webcam.
If your PC includes a TV tuner, often the TV tuner is the default video input device. So, for example, if you are using Windows Live Messenger to have a video chat with your webcam, you need to select the your Webcam as the active input device because the TV tuner is the active video input device by default.
Example: Select webcam in Windows Live Messenger
To select the webcam as the default video input device in Windows Live Messenger:
1. Open Windows Live Messenger.
2. Click the arrow icon on the Windows Live Messenger toolbar.
3. Select Tools and then Audio and Video Setup .
4. Click Next, Next, and then Next again.
5. In the "Select a Webcam you would like to use" dropdown list, select the name that corresponds to the webcam that is installed on your PC (such as USB 2.0 Camera)
6. Click Finish.

Step 4: Download the latest drivers and updates for your webcam and your video software
Some webcams may not be recognized by some software programs unless you have the most recent drivers and updates for your webcam hardware and webcam video software. Also, if the video footage from your webcam is in a format not supported by your video software, you may need a third-party plug-in or utility to view or convert the video footage to a format supported by your webcam video software.
  • If you installed the webcam separately, go to the webcam manufacturer's website and download the latest drivers, updates, plug-ins, or conversion utilities for any webcam video software. Make sure the webcam drivers and software are compatible with Windows Vista!
  • If you are having problems getting the webcam to be recognized by video playing or editing software, go the software manufacturer web site to find and install any updates or patches.
  • Check Windows Update for any Vista-related drivers that may affect your webcam and your video software. Click the Start button, All Programs , and then Windows Update
Step 5: Make sure you have the correct Vista drivers installed
If you are having problems hearing sound or using your webcam, try the following steps.
Make sure you have installed the correct Vista drivers and not the generic sound driver in Windows. If you have installed the generic sound driver, uninstall the webcam video software and download and install this Vista sound driver, and then reinstall your webcam video software.
To update Windows Vista drivers:
  • Click the Start button, All Programs , and then click Windows Update . If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
  • Click Check for updates .
  • To see if updated drivers are available, click View available updates . Windows Update will list any updated drivers that are available for devices installed in your computer.
  • If updates are available, click the driver that you want to install, and then click Install . Follow any onscreen instructions to finish installing the available drivers.
You may need to set up the sound settings in your instant messaging program or any other video webcam software you are using with your webcam. Refer to the Help information in your webcam software.

Aug 15, 2010 | Logitech Webcam

1 Answer

Since upgrading to Vista and now windows 7 I cant


Start the "Program Compatibility Wizard".
Tell Vista that you want to install an 'XP' application.
Point the Wizard to the CD-ROM containing the software, and it will install.

Jan 15, 2010 | Adobe Photoshop Elements 2.0

1 Answer

Unable to install scanner


Cant find such a scanner, are you sure of the model "performance", If it is not Vista compatable, ie if Epson have not released a Vista driver, then it is not going to work with Vista.

See Epson web and download driver if available, if not change scanner or operating system or purchase software

Check your Epson product CD to see if it already contains Windows Vista drivers. If the CD indicates support for Windows Vista, follow the instructions that came with your Epson product to install your driver and other software.

If your Epson CD does not indicate support for Windows Vista, DO NOT INSERT YOUR EPSON PRODUCT SOFTWARE CD IN YOUR WINDOWS VISTA COMPUTER because the setup program is not compatible with Windows Vista. Instructions for installing additional software from your CD may be available with your driver download.

Note: If you already have ArcSoft PhotoImpression™ 5 installed on your Windows Vista computer, you may need to install a "patch" program. Go to the ArcSoft website to download and install the patch.

Products that are not Vista compatable are not capatable with Vista, who would figure hey!!

Jan 23, 2009 | Office Equipment & Supplies

4 Answers

Lost software, windows vista


This fix will work for all of the VEO Stingray problems because it gives a good driver download site and it tells you step by step how to get your cam to work with VISTA Good Luck and let me know if this fixed your problems.


1.Go to this site and download the driver you need: http://www.softsci.com/veodrivers.htm

2.Download it to your desktop

3. Don't unzip, install, or plug in your cam yet

4.Search for this in your start menu: Program Compatibility Wizard

5. Of the three choices click the one that says look for the program manually

6. Choose the option for XP

7. Choose the 680 x 420 or whatever it is not the 256 colors

8. Choose to run as administrator

9. Click next and it should change your screen to a real big resolution and then it will start to install the driver

10. Go through the install wizard

11. After it has loaded plug in your camera

12. Try a program that it is supposed to work with

13. Finish the Compatibility Wizard

now everything should work for your cam.
This works with all of your programs that vista will not run.

Dec 21, 2007 | Veo Stingray

1 Answer

MP160 unknown device error in Vista


How do I install the downloaded driver and software?



If you have upgraded to Windows Vista™ from another Windows version or have installed drivers and application software from a previous Windows version, the previous driver and application software must be uninstalled prior to installing the Windows Vista™ drivers and application programs. Uninstallation instructions
Prior to installing the driver software, power off the printer and do not turn it back on until instructed to do so during the installation.


Vista Software can be found here

http://software.canon-europe.com/products/0010392.asp

Select Vista for the OS
Select English
Click Submit

Download software and drivers applicable to
Windows Vista 32 bit.

Install the downloaded software

Dec 18, 2007 | Canon PIXMA MP160 All-In-One InkJet...

2 Answers

Logitech QuickCam STX vista compatibility?


when you were installing the software did a taskbar pop up appear and tell you that hardware was found, and then proceeded to install the cam and inform you that the Logitech STX is now installed and ready for use? If not then the cam may need to be tried in another usb port as of yet it has not been recognised by windows. Also if this is being used on a laptop, sometimes there is not enough power amps being sent be the usb port to recognise, again trying a different port may solve that. If all else fails re install the software again, but make sure windows is allowing the cam to work, as sometimes there is an updater programme that works in conjunction with the cam to update drivers etc, this will probably be being dissalowed by either windows or your internet security programme and any part of the software that is being blocked may be stopping your cam also.

Jun 11, 2007 | Logitech QuickCam Communicate STX Personal...

3 Answers

Veo webcam problems


the problem lies with the driver of the cam particularly the capture execution file. removing the cam and uninstalling the driver from add/remove programmes, then reinstalling the driver software again should cure it and if possible use a different usb port if you have a spare.

May 19, 2007 | Veo Advanced Connect Webcam

Not finding what you are looking for?
Uniden UDW10003 Wireless Portable Video Security Surveillance System Logo

Related Topics:

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Home Security Experts

D. E. Hev

Level 3 Expert

1167 Answers

Coss

Level 3 Expert

1056 Answers

Lawrence Oravetz

Level 3 Expert

9324 Answers

Are you an Uniden Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...