Question about Canon imagePROGRAF iPF8000 Printer
So long as you don't tilt 10+ degrees sideways and 30+ long ways, you allegedly don't even have to bother with the move printer mode; i couldn't get any info out of the so called service engineers by phone after my display said "consumables need replacing, call service", so i didn't even bother with level 1 drainage. I even had steep cambered paths to negotiate. So long as you get 4 people and have a 2 way spirit level each end, coordinate and take care, there shouldn't be a problem. Also, avoid vibration and heavy knocks as on rough floors and doorways
Posted on Aug 16, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You need to boot the printer into service mode.
Hold down the roll/source button and the info button while you are powering on the machine.
This should get you booted into the service menu where you can then access the replace printhead function
When you have successfully replaced the printhead, reboot the printer to get out of service mode,
You may also want to check the firmware version of your printer and update it.
Updates can be found on the Canon website
Posted on Jan 27, 2009
it's a multiple problem....there is no enough ink for the head managment sensor to understand the good function of the print head.
Print a nozzle check to see what is going on
Then come back for more information
Posted on Mar 17, 2009
I have had two of my Canon plotters give this error.message, I had to manually move the carriage unit and replace the printhead. On one of the plotters the error message returned, on the second plotter I was able to go into service mode where it asked me to replace the printhead. I just went though the motions since the printhead was brand new and I was able to get the plotter to function correctly.
Posted on Jun 03, 2009
Tips for a great answer:
Dec 08, 2015 | Canon IPF710 A0 Wide Format Plotter...
Aug 21, 2014 | Canon imagePROGRAF iPF750 Wide-Format...
Oct 12, 2012 | Canon imagePROGRAF iPF8000 Printer
May 19, 2011 | Canon Office Equipment & Supplies
Mar 31, 2010 | Canon imagePROGRAF iPF8000 Printer
Feb 21, 2009 | Canon imagePROGRAF iPF8000 Printer
Dec 22, 2008 | Canon imagePROGRAF iPF8000 Printer
250 people viewed this question
Usually answered in minutes!