Question about Computers & Internet

1 Answer

The audio in my computer is not functing - Computers & Internet

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

First you need to know, what the chipset for your sound card is. Check your literature that came with the computer first, if you don't have any literatur then we can find it other ways. The best way to find this out is reboot your PC and go into the Bios on reboot, by oressing del as it's booting up, somtimes it's f2/f3, it should display on the splash screen as it's booting wht key to hit, most PC's it's del, some it's f2/f3 and some it esc. Once into the bios go to advanced and you should see audio select this and it should show a manufacter chipset for your sound card, if not. you can go to control panel, system, hardware, device manager, sound and sometimes it will show the sound chipset manufacturer about 3/4 of the way down the page, might something like VIA, Intel, AC97, etc. If this fails , you may need to open your PC, don't do this if you've never done it before, get help from someone that knows what they're doing, what your looking for is a sound chip on the motherboard, or add on card, get the manufacturer name/chipset, from here we can look for a driver.

Posted on Oct 14, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Microwave functing but the turntable not work foowarnd


Did it work before? Some (old) microvawes didn't have tutntable at all.

Jun 11, 2015 | Microwave Ovens

1 Answer

Speakers blown hitachi cp-x2511n


Besides replacing the speaker, you can connect the unit to an external set of speakers such as surround sound, or desktop speakers, depending on what your setup allows.

Nov 12, 2013 | Hitachi Gst "hitachi cp-x2511n xga, 2700...

1 Answer

I have a new canon Image Runner 2530 it has an error code E-000000,


add.funct 2+8 add.funct. copier function clear err ok shut off then on again.

Apr 14, 2012 | Office Equipment & Supplies

1 Answer

I have a 5.8 Ghz phone system. Someone had turned the ringer off both line of one of my phones. How do I restore both ringers?


On the handset,there should be a function or funct button.Hold it down or press it.You cycle through the options by either funct button or directional button(I think funct).Once you get to set rings,I think that is when you use the directional button to set the rings.Keep cycling through options until it is all done.You may have to do it for both handsets.
Good luck!

Jul 05, 2010 | Lands Phones

1 Answer

Royal (Kyocera) KM-2530 Need to add workstation to scanner funct


Go to www.kyoceramita.com for software. Make sure you select the proper software specific to your model and computer operating system.

Dec 01, 2009 | Kyocera Mita KM-2530 Laser Printer

1 Answer

Have a canon ir-5570 w/ error E00000-0010 will not allow me to reset code Any ideas? Tried the reset procedure of ad.funct 2 & * adfunc will not go into mode


press ad.funct. then press 2 & 8 keys at the same time,
then press ad. funct. , copier display shows setup mode go to (function)
tab and press clear error.

Aug 20, 2009 | Canon imageRUNNER 5570 Copier

1 Answer

My joystick buttons i dont know how to use it for different funct


Try going into "control panel" on your computer, then select "game controller", type in the controllers name, then select "add". Thats as far as I can help as I dont have a joystick. But I imagine you go to "advanced" and it will allow you to configure it there. Hope that helps.

Apr 02, 2009 | Video Game Consoles & Games

3 Answers

I keep getting error codes


i am getting error E000001 -0010

Sep 16, 2008 | Canon imageRUNNER 5570 Copier

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...