A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones). click here to download the app (for users in the US for now) and get all the help you need. Good luck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
To change the time on a prostar 816 you first need to be at a display set (doesn't matter what the extension number is). with the handset down, enter #20 the screen should say MMC DISABLED 1) enter in 1 2 3 4 1 # (that enables programming) 2) enter in #55 the screen should say YYMMDDWHHMM 3) enter in the year, month, day, day of the week, hours and minutes(the day of the week values are 1= mon. 2= tues. etc.) press # when finished.
How do I change the Time and Date on a Merlin Legend system? To change either the Date or the Time on the Legend system, you must
program it from the main System Programming console (MLX-20L). This will
change the Time or Date on all the display phones throughout the system,
except the ATL (Analog) display sets. These phones must be programmed on
each individual set.
How to change the Date in the Legend system:
Press System Program.
Enter date in following format: mmddyy (where MM is the month, DD is the
day, and YY is the year).
Press Home to exit programming mode.
How to change the Time in the Legend system:
Press System Program.
Enter the time in military/24 hour format: HH:MM (where HH is the hour,
01-24, and MM is minutes, 00-60).
ENABLE CUSTOMER PROGRAMMING With the handset on-hook, dial #06. The display shows [MMC DISABLED]. Dial the passcode and 1 and then press #. At this point, customer programming is open. Follow instructions as needed.
TO SET TIME AND DATE::
Dial #55. Display shows [YY MM DD W HH MM]. Dial new information as follows: YY = Last two digits of the year MM = Month (01–12) DD = Day of the month (01–31) W = Day of the week (1–7; week begins on Monday and ends on Sunday) HH = Hour (use 24 hour clock) MM = Minutes (00–59) Dial # to set current date and time. The phone returns to normal use.
And here is the full operational manual: http://pdf.textfiles.com/manuals/TELECOM-S-Z/Samsung%20Prostar%20816%20Plus%20System%20Admin%20-%20Specia.%20Features%20Guide.pdf
To change the date, enter the date in MM.DD.YY format, pressing the decimal key between the month and day (will show as a decimal on the display) and the day and year (will show as a dash on the display). Then, press the Time/Date key (the one that looks like a clock and a calendar). The new date will show on the display. Note that if the month is less than 10, you do need to press the 0 (zero) key for the first digit, even though it will not show on the display.
To change the time, enter the time in 24-hour HH.MM format, pressing the decimal key between the hour and minute. Then, press the Time/Date key. The new time will show on the display. Note that if the hour is less than 10, you do need to press the 0 (zero) key for the first digit, even though it will not show on the display.
Hope this helps! :)
SET DATE AND TIME DISPLAY Should it become necessary to correct the date and time displayed on all of the keysets, due of time change (twice a year), you must first access the customer programs. To access customer programs, open system programming using the passcode you have been assigned. (Default passcode is 1234). You must use a (display phone) LCD 12B or LCD 24B keyset.ENABLE CUSTOMER PROGRAMMINGWhile on-hook, press TRSF and dial 200. he display shows.ENABLE CUS. PROG. PASSCODE:Dial the four digit passcode. The display shows:ENABLE CUS. PROG. DISABLEDial 1 or press the ▲ on the Volume to enable. The display shows:ENABLE CUS. PROG. ENABLEPress TRSF. The keyset returns to its idle condition. The display format is the following: W (Day of the week): Enter 0 for Sunday and 6 for Saturday. MM (Month): Enter 01 for January and 12 for December. DD (Day of the month): Enter a number in the range of 01-31 YY (Year): Enter the last two digits of the year. HH (Hours): Use the 24 hour clock and enter a number in the range of 00-24. MM (Minutes): Enter a number in the range of 00-59.SETTING THE DATE AND TIME1. Press TRSF and then dial the 505. The display shows: OLD: 1102802:0852 NEW: WMMDDYY:HHMM2. Enter the new time and date using the above format:OLD: 1102802:0852 NEW: 1102802:07523. Verify the time and date and reenter them if necessaryOLD: 1102802:0752 NEW: WMMDDYY:HHMM4. Press TRSF to store and exit programming. If you have entered invalid data, you will receive an [INVALID ENTRY] message for three seconds. Reenter the correct date and time. If the information you entered is incorrect, repeat steps 1 through 4.
First to change the clock to a 12 hour instead of a 24 hour requires a bit of CAUTION. You have to go into the technician level of programming so be careful. From a display phone, Press #, ( Programming ) is displayed, enter 20, ( MMC Disabled ) is displayed, enter password ( 1 2 3 4 is default ), enter function 4 for 12 hour clock, enter # to exit. If the time and date are displayed wrong you have to go to # 55 and reset time and date.
YY MM DD W HH MM format. W = Day of week with 1=Monday and HH MM must be entered in Military time even though you have a 12 hour clock set. Good Luck
First, you have to Enable Customer Programming.
- With handset on-hook, dial #06. The display shows [MMC DISABLED].
- Dial the passcode and '1' and then dial #.
(If you don't know the password try 1234, 4321, 9999, etc.)
At this point, customer programming is open...
Next, Setting the date and time.
- Dial #55. Display shows [YY MM DD W HH MM].
- Dial new information as follows:
YY = Last two digits of the year
MM = Month (01-12)
DD = Day of the month (01-31)
W = Day of the week (1-7; week begins on Monday (1) and ends on Sunday (7))
HH = Hour (use 24 hour clock)
MM = Minutes (00-59)
- Dial # to set current date and time. The phone returns to normal use.