Question about Garden

Open Question

Manual for skilsaw model 3400 - Garden

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: I burnt out the motor on my Skilsaw Model# 3400

LOOKING FOR A MOTOR FOR A 3400 SKIL TABLE SAW

Posted on Apr 25, 2010

  • 30 Answers

SOURCE: can I order from anyone a new fence for a skilsaw

Skil is part of Bosch Tools. You can go to their website. https://www.boschtoolsservice.com. Click on "Search for your tool" under tool model # type in 3400. I believe the fence you are looking for is part #860 and costs about $34.00, however I would recommend calling them because there were so many variations on the 3400 that there may be more than 1 fence for model 3400 and you want to make sure you get the proper one.

Posted on Oct 10, 2010

Asbestos 56
  • 191 Answers

SOURCE: looking for cost of replacement

i looked online at places I get parts from. Neither listed the motor as a part the had the aramature for about $70 and the field for about $35. Have you tried the reset button? also it may just need new brushes.(if you see lots of sparks at the end of the motor opposite the blade, look through the air vent slots it is likely the brushes, unplug the saw, and take them out and replace them HERE is a blow up ) the I would think that if the saw is well used and the motor has burnt out. It may be a lost cause. I am not sure what the price of this was new but you can get a reconditioned saw from Amazon for 135 bucks. And it is a 15 amp saw.

Posted on Dec 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MY GIRLFREIND GAVE ME A SKILSAW TABLE SAW AND I DON'T KNOW HOW IT STARTS


On the front of the saw right to the left of the words Skilsaw you will see a large red switch. Pull it out to start the saw and push it in to stop the saw.

Jul 04, 2011 | Skil 10" Table Saw 3400

1 Answer

Looking for cost of replacement motor for skilsaw model 3400 13amp for 10" table saw and where to buy from? Also, is there a 15amp replacement motor that would bolt right in to replace?


i looked online at places I get parts from. Neither listed the motor as a part the had the aramature for about $70 and the field for about $35. Have you tried the reset button? also it may just need new brushes.(if you see lots of sparks at the end of the motor opposite the blade, look through the air vent slots it is likely the brushes, unplug the saw, and take them out and replace them HERE is a blow up ) the I would think that if the saw is well used and the motor has burnt out. It may be a lost cause. I am not sure what the price of this was new but you can get a reconditioned saw from Amazon for 135 bucks. And it is a 15 amp saw.

Dec 07, 2010 | Skil 10" Table Saw 3400

1 Answer

Can I order from anyone a new fence for a skilsaw fence model 3400.


Skil is part of Bosch Tools. You can go to their website. https://www.boschtoolsservice.com. Click on "Search for your tool" under tool model # type in 3400. I believe the fence you are looking for is part #860 and costs about $34.00, however I would recommend calling them because there were so many variations on the 3400 that there may be more than 1 fence for model 3400 and you want to make sure you get the proper one.

Oct 09, 2010 | Skil F0123400AB Na 10" Table Saw, 15 Amps

2 Answers

Users manual for Skilsaw model 3305


I found something on amazon, take a look here: Amazon com Skilsaw manual. I hope this was helpful. cheers

Sep 02, 2009 | Skil Saws

2 Answers

Hi , i have a skilsaw 3400,but the blade is to hard when hand turning it, want to know if it uses ball bearing or another stuff. thanks. pedro pm24h@yahoo.es.


If it is direct drive blade mounted to motor) you will have to remove the motor and check the bearings. Most newer electric motors have sealed bearings. I would suggest that you remove the motor and take it ot an electrical shop (call around first) and have them replace the bearings, clean it up and replace the carbon brushes. Anothe alternative is look for a replacement motor through places like Grangers, Norther Tools, etc.

If it is belt driving check all the components (pulle bearings, etc) for friction.

good luck....gary

Mar 13, 2009 | Skil 10" Table Saw 3400

2 Answers

Table saw skilsaw model number 3400 15 amp


What you are describing sounds like the power is being interrupted somewhere. In my experience, this is usually casued by a bad switch. Try replacing the trigger switch.

Dan

Oct 19, 2008 | Bosch 7 - 1/4" Skilsaw Circular Saw

4 Answers

Manual for Skil Saw model 77 type 17


I have a Skilsaw model 77 type 16. I have the original owners manual and would be willing to fax you a copy.
The manual only lists a part number for the gear oil, it is No. 249. This is for a 5-3/8 oz tube of gear oil. I checked with my local hardware store which services this saw and they called a factory rep. They told the hardware store with shipping and handling it would cost about $17 for the oil! However they also said that a 90 weight gear oil is close enough to solve the problem.
Hope this helps.

Sep 22, 2008 | Skil 7 1/4" Magnesium "Mag 77" Wormdrive...

Not finding what you are looking for?
Garden Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2475 Answers

john h

Level 3 Expert

10993 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...