Question about Maytag MER6769 Gemini Electric Kitchen Range

1 Answer

F-2 code displayed with beep went off - Maytag MER6769 Gemini Electric Kitchen Range

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Maytag Master
  • 3,051 Answers

Hello there:
This error code is telling you that the oven is getting too hot and the sensor is unable to read it
meaning at lets say you have it set to 400 degrees and it is heating up it will continue to heat up to about 550 degrees and will thus produce the f-2 error code
The only way to fix this is that the electronic oven controle temperature sensor needs to be checked with a ohm meter it should read (should be 1100? ) on the temperature sensor if not replace it if this is good than you will have to replace the electronic oven controle itself ok?
Hope this is very helpful for you
Best regards Mike

Posted on Oct 14, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to boot dell inspiron one 2020 when it only beeps


the number of beeps will tell you what the problem is the beeps are an error code here are the code list for your computer

Beep Code Description No Beeps No Power, Loose Card, or Short. 1 Short Beep Normal POST, computer is ok. 2 Short Beep POST error, review screen for error code. Continuous Beep No Power, Loose Card, or Short. Repeating Short Beep No Power, Loose Card, or Short. One Long and one Short Beep Motherboard issue. One Long and Two Short Beeps Video (Mono/CGA Display Circuitry) issue. One Long and Three Short Beeps. Video (EGA) Display Circuitry. Three Long Beeps Keyboard or Keyboard card error. One Beep, Blank or Incorrect Display Video Display Circuitry.

May 25, 2014 | Dell Inspiron One 2020 All-in-One Desktop

1 Answer

Locked out


The setup Security Code can be done when the
<Demonstration mode Setting> (page 50) is set as OFF.
• When the Security Code function is activated, the code
can’t be changed and the function can’t be released.
Note, the Security Code can be set as the 4 digit number
of your choice.
1 Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2 Enter Menu mode
Press the [MENU] button for at least 1 second.
When "Menu" is displayed, "Security" is displayed.
3 Enter Security Code mode
Press the Control knob for at least 1 second.
When "Enter" is displayed, "Security" is displayed.
4 Select the digits to enter
Push the Control knob to [4] or [¢].
5 Select the Security Code numbers
Push the Control knob to [FM] or [AM].
6 Repeat steps 4 and 5, and complete the
Security Code.
7 Confirm the Security Code
Press the Control knob for at least 3 seconds.
When "Re-Enter" is displayed, "Security" is
displayed.
8 Do the step 4 through 7 operation, and
reenter the Security Code.
"Approved" is displayed.
The Security Code function activates.
• When the wrong Code is entered in steps 4 through 6,
repeat from step 4.
Press the Reset button and when it’s removed
from the battery power source
1 Turn the power ON.
2 Do the step 4 through 7 operation, and enter
the Security Code.
"Approved" is displayed.
The unit can be used.
In Standby mode
Touch Sensor Tone
Setting the operation check sound (beep sound)
ON/OFF.
Display Setting
"Beep : ON" Beep is heard.
"Beep : OFF" Beep canceled.
In Standby mode
Manual Clock Adjustment
• This adjustment can be done when the <Synchronize
Clock> (page 43) is set as OFF.
1 Select Clock Adjustment mode
Push the Control knob to [FM] or [AM].
Select the "Clock Adjust" display.
2 Enter Clock Adjust mode
Press the Control knob for at least 1 second.
The clock display blinks.
3 Adjust the hours
Push the Control knob to [FM] or [AM].
Adjust the minutes
Push the Control knob to [4] or [¢].
4 Exit Clock adjustment mode
Press the [MENU] button.
The Whole manual is here.
http://www.kenwood.net-disp.com/i/05products/kdc_x789/pdf/kdc_x889_x789_mp828_k_english.pdf

Dec 06, 2007 | Kenwood KDC-MP628 CD Player

1 Answer

3 beeps on startup


Below are IBM BIOS Beep codes that can occur. However, because of the wide variety of models shipping with this BIOS, the beep codes may vary. Beep Code Description Document No Beeps No Power, Loose Card, or Short. CH000312 1 Short Beep Normal POST, computer is ok. No problem 2 Short Beep POST error, review screen for error code. See screen Continuous Beep No Power, Loose Card, or Short. CH000607 Repeating Short Beep No Power, Loose Card, or Short. CH000607 One Long and one Short Beep Motherboard issue. CH000607 One Long and Two Short Beeps Video (Mono/CGA Display Circuitry) issue. CH000607 One Long and Three Short Beeps. Video (EGA) Display Circuitry. CH000607 Three Long Beeps Keyboard / Keyboard card error. CH000304 One Beep, Blank or Incorrect Display Video Display Circuitry. CH000607

Mar 26, 2013 | IBM ThinkPad Computers & Internet

2 Answers

Laptop display went black after inserting a USB cable for iPod.


count the beeps on startup, and makes sure that you count if any are long beeps and short beeps as these are bootup error codes.

Mar 24, 2010 | Compaq (169174-002) - (Refurbished)...

1 Answer

Beep sound continus


I went to google and it seems like the beeps can be problems for different problems in the hardware, this is what one message says,  there are lots of computer beeping answers out there: 1 short beep is your BIOS saying "HELLO I'M OK" 

Standard Original IBM POST Error Codes 

1 short beep Normal POST - system is ok 
2 short beeps POST Error - error code shown on screen 
No beep Power supply or system board problem 
Continuous beep Power supply, system board, or keyboard problem 
Repeating short beeps Power supply or system board problem 
1 long, 1 short beep System board problem 
1 long, 2 short beeps Display adapter problem (MDA, CGA) 
1 long, 3 short beeps Enhanced Graphics Adapter (EGA) 
3 long beeps keyboard card 

Each BIOS company has modified these codes over the years.

May 25, 2009 | Dell Dimension 4600 PC Desktop

1 Answer

I have Fridigaire double oven part# PLEB27T8ACA with F8 code prob


wow, that is so weird...i was just getting ready to write the exact same thing. this last time mine beeped, i just kept letting it beep for several minutes. if kept on. i then went in and pressed all the buttons except for cancel and nothing happened. then i pressed the oven light button. the beeping stopped. not sure if it's coincidence or if that was what i was supposed to press. i will keep messing with the buttons and let you know if i figure it out. i will dread if it beeps all night long.

Feb 14, 2009 | Frigidaire PLEB27T9DC Electric Double Oven

1 Answer

Kenmore oasis electric dryer beeps and displays code F45


We had this error on our machine for about a year before we finally got sick and tired of it. Our dryer was purchased in 2006.

Here is the solution: the code means there is an error on the thermistor. Our thermistor was loose, as were other electrical wires. My husband tightened up all the connections and the thermistor, and we have never had this error again.

However, we will never buy these machines again either, because we have had numerous other errors on the washer and dryer.

Nov 19, 2008 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

F1 code on display pad


That error means the main control board has a internal failure. The board will have to replaced to fix that issue. If you need detailed repair help with that visit the link below:
Appliance Repair Help With Live Chat

Mar 23, 2017 | Amana AOGD2750 Gas Double Oven

Not finding what you are looking for?
Maytag MER6769 Gemini Electric Kitchen Range Logo

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Kitchen Ranges Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Lawrence Oravetz

Level 3 Expert

9587 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Maytag Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...