Question about Telex ENG100LA Camera Mountable UHF Diversity Lavalier System with ENG-100 Receiver, LT-100 Beltpack... Microphone

1 Answer

Cam belt-landrover freelander

Hi, my cam belt went on my freelander 3 weeks ago,and i am still waiting for it to be repaired. they said that 12 valves were bent as well. i have no idea how long these things take, but do you think 3 weeks is acceptable?? i keep on to them, but they just keep saying it will be ready for me tomorrow.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 89 Answers

The dealer gives a realistic tool time of 11 hours .This includes removing and refitting the cylinder head , replaceing all valves and grinding and seating the valves.The only extra time they should need is the engineering work which is normally subcontracted.In my professional capacity i would say they are taking too long.

Posted on Nov 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a stagg microphone. its a pgt - 60. At the bottom it has 3 prongs. I have a xlr adapter. I plugged it into my computer and it installed correctly, but when i tried to use it in audacity it didnt...


The Stagg is a condenser microphone... It needs whats known as "phantom power" in order for it to function... Phantom power is a 12-48 volt source that usually comes from an audio console or some sort of pre-amp... You will need either an audio console or pre-amp to hear anything from it...

Feb 05, 2011 | Stagg Microphones

1 Answer

Why is my mic not picking up noise like it did when i first gotit


Double-check on the side of the microphone to make sure you didn't inadvertently activate the 10db pad.  If so, switch it back to the center position.
Also, on the US-122, make sure that the input is set to "mic" and that you have switched the Phantom Power to the "On" position.

Jan 30, 2009 | Behringer B-1 Professional Microphone

1 Answer

Not getting any power in my 3-year-old Sennheiser MKE44P even with a fresh battery inserted.


Battery acid is very corrosive and if you have had a leakage then the acid could have gotten further up into the mic and corroded some of the components, most likely a small power lead from the contact. It is always worth taking the battery out after use, a £3 battery can ruin £300 worth of kit.

Oct 17, 2008 | Microphones

1 Answer

No good sound quality


ARE YOU RECORDING IN STEREO OR MONO

Sep 01, 2008 | Samson C01U - USB Studio Condenser...

1 Answer

Sm58 beta is totally dead


Hi djmalatesta

One could go all superstitious and suggest that it was just bad luck!! It is unusual for one of these industry standard mics to just stop. The most likely cause is the capsule has gone open circuit. you could check this with the 1k range on a multimeter by unscrewing the wind shield and measuring across the . connections to the capsule. If the capsule measures ok, it may be the wiring to the XLR socket at the base of the mic, the switch getting to there. Either way, it can be fixed. Can you meter out the capsule and report back to me what you found?

I am more than happy to answer any other questions you may have about it, please get back to me here, or use the ASK function to go straight to me :) If you are still unsure, have problems, or we need to look at the situation more deeply, then before you give a rating for this advice, hit the ASK button Thanks for using FixYa, If you consider the advice I have given you as sound, a FixYa rating is a great reward for my efforts to help you. Cheers.

regards robotek

Jun 27, 2008 | Microphones

1 Answer

Microphone problem


hi i know this is old but would you like to sell it ?
isit a beyerdyamic m560?

May 29, 2008 | Microphones

Not finding what you are looking for?
Microphones Logo

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Telex Microphones Experts

Rick

Level 2 Expert

611 Answers

Iron
Iron

Level 3 Expert

3018 Answers

GERHARDUS STROEBEL

Level 2 Expert

76 Answers

Are you a Telex Microphone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...