Question about Computers & Internet

1 Answer

Trying to get into wireless network but they wont let me in without a password which i dont have, where do i get this. the password i put in is not correct.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 86 Answers

Hi i got your issue .......
You can find the security key by following the steps (only for BELKIN ROUTER)

Step 1: Connected modem>>router>>computer
Step 2: Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer
Step 3: Towards the left corner click security under wireless
Step 4: It will ask you for a password .....leave it blank and click on submit
Step 5: If the security mode is wpa -uncheck obscure psk and you can get the password
Step 6: If its wep security the ten numbers will be the security key

If problem still presists please contact 24/7 belkin technical support 1800-2235546
Thanks.....
With regards ......
Priya ,,,,,

Posted on Oct 14, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wifi works and all but keeps having my two phones put the password in every half and hour. I don't have the disc for it so can't really set it up just connected it to my charter modem.


Try this please:
  1. eHow
  2. Internet
  3. Wireless Internet & Network Hardware
  4. Netgear Wireless Routers
  5. How to Access Netgear Wireless Router Settings
X Must See: Slide Shows
How to Access Netgear Wireless Router Settings Xno-user-image.gif Ryan Bauer

Ryan Bauer is a freelance writer located in Ozark, Missouri. He has written numerous articles and books, including "How to Improve Your Credit Score 100 Points in 100 Days." Bauer is an experienced automotive mechanic and computer technician.
By Ryan Bauer, eHow Contributor , last updated February 24, 2012

72955587_xs.jpg Wireless routers connect computers to a network without the need for network cables.

Wireless routers are used to connect computers into a network without running network cables throughout your home or office. Netgear wireless router settings must be changed using the router's Web-based interface. Any computer that is "hard wired" with a network cable to the router, rather than on a wireless connection, can be used to access the router. From the Settings menu, options such as "Encryptionicon1.png," "Network setup details" and "Passwords" can be customized.

Other People Are Reading

Instructions
    • 1

      On a computer that is connected to the routericon1.png with a network cable, open any Web browser, such as Internet Explorer or Mozilla Firefox. In the address bar, type "192.168.0.1" (without the quotes) and press "Enter." This will bring up the login prompt for most Netgear wireless routers. If that doesn't work, try "www.routerlogin.net", "192.168.0.5", or "10.1.10.1" until the login window appears.

    • 2

      Type "admin" in the Username field, type "password" in the Password field and click "OK." If the password fails, try "1234," "Password" with a capital "P" or "admin". Once you enter the proper credentials, the settings screen will open.

    • 3

      Make any required changes to the settings. Under Security section, it is possible to specify a new username and password for added security. Once you have saved your changes, close the window, and the system will automatically log you out.



Read more: How to Access Netgear Wireless Router Settings ' eHow.com http://www.ehow.com/how_4913660_access-netgear-wireless-router-settings.html#ixzz2H3QQJGxn

Jan 04, 2013 | Computers & Internet

2 Answers

D-Link wireless router forgot password how may I recover or assign a new one


Hi there,

A wireless router password wont be recovered unless you still have the password you can enter or if the router is unmanaged without an admin password.

another option would be resetting your router to be able to get through the router and assign a new password.

here's how: you need to directly connect your computer or laptop wired going to your router not using a wireless one. then reset, make a new network configuration and put your admin password later. dont forget to backup your router config. in a folder together with your password so the nextime you forgot any thing or change anything. just look back to your folder where you put your backup config. and password.

Jun 24, 2012 | D-Link Computers & Internet

1 Answer

I forgot my secuity key for my router. I need to put in a new one- or find the old one. I have a internet tv that will not work without the secuity key -please help


Hi,

Welcome to Fixya. If you need the Security key or Network Key you need to access the Wireless Settings Page.

To access the router page just open a browser then type 192.168.1.1, the Default username is blank and the password is admin. Go to the Wireless Tab select Wireless Security under the Security Mode you will see there Network Key or Wep Key. The Network Key or Wep Key serves as a password or security code on your network to make it secure.
You can also reset the router by pressing the Reset button at the back of it for 15-30 seconds using a Pen and a Paper Clip.

If this works dont forget to say thanks. Thanks for using Fixya.

Feb 16, 2011 | Linksys Wireless-G Broadband Router

1 Answer

Why is my facebook always logged on even without password


hello,
when you log in for facebook dont check the remember account and password box . It wont log on if you dont put password in next time
Thanks.

Apr 30, 2010 | Facebook Social Network

1 Answer

Tried to get on line with ps3 went to network put in enable went to put in wirless went to scan found my internet and it wants me to put in wep dont no what that wep is


WEP is short for Wired Equivalency Privacy and it is a security protocol for Wi-Fi networks.

If it is asking for your WEP, you will need to know what the password you entered into you wireless router was. That same password will need to be entered into the field on your PS3.

If you are unsure of the password, try logging onto your wireless router and check the settings out under wireless security.

To identify your wireless router web page, type the model into Google and look for the online link. If you didn't set a admin password then the default one will still be active.

If you still have questions, drop another post.

OpenSource13

Apr 17, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

Random wrong passwords


Any router that your connecting to wireless, without a password, does not have wireless security set up on the router.

Any other wireless router that you are trying to connect to that does not allow you to connect wireless, has wireless security set up and that same security must be set up on the wireless device (like laptop or desktop, whatever is not connected via ethernet cable.).

Reply back what you find and I will be glad to help more.

Feb 04, 2009 | Adaptec Computers & Internet

2 Answers

How to install linkys without the cd


You can manually install it even without a CD, if you dont know how to do that you can contact Linksys tech support so they can walk you through in configuring it manually , this is the number 800-3267114....

Hope that helps..........

Aug 25, 2008 | Linksys Wireless-G WRT54G Router

4 Answers

2 Wire DSL Wireless modem range expander


you might want to try to change the wireless channel 1. open your internet browser 2. type on the address bar 192.168.1.254/management or 172.168.0.1/management and press Enter 3. type your system password (modem password) 4. go to home network -> wireless 5. change your wireless channel to 9 - 10 if after changing the channel it still wont work please check for EMI (Electro Magnetic Interference) such as electric appliances, hallucinogen lamps, WIRELESS PHONES, satellite dish and or alarm systems. also make sure that you dont put your router on a carpet. usually a good distance between your router and the computer is around 5 - 20 feet with no walls between them since walls also contribute on the interference. one last note, keep your router away from water i.e. aquariums, water dispenser and the like since water contributes to the interference of the wireless signal

Feb 09, 2008 | 2wire 2700HG-B Router (2700HGB)

3 Answers

Bought a new acer aspire 3680 have linksys wireless router it detects it i put my pass in and i


Do you mean password?
Your post is difficult to understand because of the lack of punctuations and capital letters.
Remember, all we know is what you post, so try to be more legible.
Try resetting your router to defaults.

Nov 20, 2007 | Acer Aspire 3680 Laptop

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...