Question about Kenwood Car Speakers & Subwoofers

2 Answers

Need wiring diagram for kenwood kdc-w4031 - Kenwood Car Speakers & Subwoofers

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

To my knowledge most Kenwood head units uses the following wiring/color scheme:
Yellow - always on B+12VDC such as the positive terminal of the battery;
Red - switched B+12VDC such as the ACC terminal of the IGN switch;
Black - Ground/chassis;
Pink - not available
Brown - mobile phone mute
Blue - power antenna
Blue / White - remote trigger for external device
Pink / Black - external amplifier control wire
Gray - Front Right +
Gray / White - Front Right -
White - Front Left +
White / White - Front Left -
Purple - Rear Right +
Purple / White - Rear Right -
Green - Rear Left +
Green / White - Rear Left -

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Posted on Jun 02, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,512 Answers

Hi Carol

Everything you need to know about the wiring and installation of your unit can be found from Kenwood here.

I am more than happy to answer any other questions you may have about it, just give me a hoy :) If you still have problems, before you give a rating for this advice, please get back to me and we can try some more things.
Thanks for using FixYa, If you consider the advice I have given you as sound, a FixYa rating is a great reward for my efforts to help you. Cheers.

regards
robotek



Posted on Jun 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenwood kdc mp145 wiring diagram to a 2001 oldsmobile alero


search wiring diagrams for your oldsmobile on google they should have a detailed diagram to help you

Mar 01, 2013 | Car Speakers & Subwoofers

1 Answer

Kenwood kdc-119 wiring diagram


You may download a copy of the manual here. The wiring diagram is on page 19.

Nov 30, 2012 | MTX Ford Explorer/Mercury...

1 Answer

Trying to find a wiring diagram to install my kenwood kdc-mp342u into my 2001 grand am. any ideas?


Please let me know if you have any questions, and thanks for using FixYa.

2001 Pontiac Grand Am Car Audio Wiring Diagram kenwood kdc-mp342u
Car Radio Battery Constant 12v+ Wire: Orange yellow
Car Radio Accessory Switched 12v+ Wire: none
Run a wire to the fusebox for switched power. red
a 14 gauge wire will do--use a 15 amp fuse
Car Radio Ground Wire: Black/White black
Car Radio Illumination Wire: Gray (tape this wire off) none
Car Stereo Dimmer Wire: Brown (tape this wire off) none
Car Stereo Amp Trigger Wire: Pink blue
Left Front Speaker Positive Wire (+): Tan white
Left Front Speaker Negative Wire (-): Gray white/black
Right Front Speaker Positive Wire (+): Light Green gray
Right Front Speaker Negative Wire (-): Dark Green gray/black
Left Rear Speaker Positive Wire (+): Brown green
Left Rear Speaker Negative Wire (-): Yellow green/black
Right Rear Speaker Positive Wire (+): Dark Blue purple
Right Rear Speaker Negative Wire (-): Light Blue purple/black

Amplifier Mounted behind trim in the left side of the trunk.

May 19, 2011 | Kenwood Car Speakers & Subwoofers

1 Answer

Try to make my own harness for kenwood kdc-322 need power diagram?


For the money you spend to make your own and the time it will take to figure everything out and actually build it you could go to walmart or buy the harness. You can get vehicle specific wiring harnesses for under 20 dollars.

Nov 25, 2009 | Car Speakers & Subwoofers

1 Answer

Need wiring diagram for kenwood cd/reciever kdc-mp728


if you get yourself a wiring harnest you wont need the diagram

Aug 22, 2008 | Kenwood Car Speakers & Subwoofers

1 Answer

I want to connect a Kenwood KDC-20011S CD Car stereo to my old 1995 plymouth voyager. Where is a simple website I can go to get a diagram of the wires to connect.


Go to intalldr.com and go to quick wiring info. But on the other hand I would recommend going to an audio shop or even walmart and getting a wire harness. There are so many things that can go wrong when you dont and its quicker to do. All you have to do it color match the harnesses, then plug and play. Good luck
-Andrew Hawkins

Jul 31, 2008 | Kenwood Car Speakers & Subwoofers

1 Answer

Kenwood - KDC-1020, Service Manual or wat each wire is would help as well


This is the standard Kenwood wiring harness from the service manual,
Let me know if you need more help.
I would appreciate a good rating if this was helpful to you.
Thanks
95bf658.gif

Jun 20, 2008 | Kenwood Car Speakers & Subwoofers

Not finding what you are looking for?
Car Speakers & Subwoofers Logo

Related Topics:

424 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Speakers & Subwoofers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Larry Spears
Larry Spears

Level 3 Expert

625 Answers

Are you a Kenwood Car Speaker and Subwoofer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...