Need a wiring diagram for myron&davis TFT-LCD color monitor 7 in. model number AXV-070-FB-PA

Myron & Davis wireless headphones are likely designed to be used as Bluetooth headphones. They can sync or pair with Bluetooth-enabled devices such as smartphones, tablets, computers, or other compatible devices.
To use the headphones, follow these general steps:

1. Turn on the wireless headphones and put them in pairing mode. This may involve holding down a button or following specific instructions provided in the user manual.
2. On your Bluetooth-enabled device, enable Bluetooth in the settings and search for nearby devices.
3. When you see the Myron & Davis headphones appear in the list of available devices, select them to initiate the pairing process.
4. Once the pairing is successful, you should be able to use the wireless headphones to listen to audio from your connected device.

Keep in mind that the exact pairing process and features may vary depending on the specific model of Myron & Davis wireless headphones you have. If you have the user manual that came with the headphones, it's a good idea to refer to it for detailed instructions. Otherwise, you can try searching online for the manual or contact the manufacturer's customer support for assistance.

Could of damaged some internal parts sorry

First, you need to look for a model number for the equipment, this will greatly increase the chance of success in figuring out how to install the equipment.

Do you have a manual with your Car Monitor? If you do there will be the frequency that it uses to transmit to your car stereo, probably listed under the audio or setup section.
If you don't I suggest that you call Myron & Davis on 909-796-3199 and tell them your model and your problem, they will be able to tell you what frequency you need to set your radio to. You can also email them [email protected]. Their website is here if you have any other issues.

It could be a game console connection problem, make sure that your Yello RCA output is going in your Video input on the monitor or monitor receiver. You might have a power or voltage problem, if the wrong current or voltage is incorrect then errors and freeze ups can happen, the player wont support the wrong voltage going in. Check your power connections, Video out/input connections and check your voltages.

Good luck.

Make sure to vote and rate me if I helped you. thanks

mobilevideo4 less at $40 plus shipping

Sorry, Myron & Davis are no longer made...I was a dealer and the service end has gone bye-bye.

Need diagram for:
On Flap:
XF000FSCG5P
7 inch TFT LDC Digital Ca...Car Reaf View Camera Combl
Now
On Top:
12V-24V
Pillow TFT LCD color monitor

you could try an fm modulator which allows you to tune your radio to the set frequency and then gives you sound through your speakers