Question about Belkin N Wireless Modem-Router F5D8633au4A

1 Answer

Why when I connect my router to electricity and the modem, have all the light on? How can I fix that? Is suppose that when I connect my router to the modem start functioning or I need a CD or program to run it?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 125 Answers

HI Lara,

I got your issue , When you connect the modem-router-electricity ---> you have mentioned that all the lights are ON.

Only the modem is connected to the router not your computer or other devices still all the lights are on then, its obvious the router has gone bad. Try retting the router , Look on the rear end of the router you can find a Pin hole which is the reset button of your router , take a pin or a paper clip and hold the reset for 10sec and then power cycle the router (unplug the power cable and plug it in within 10sec).

If still all the lights are on then I'm sure the router is faulty.

Good Luck!

Thanks & Regards,
Prema.

Posted on Oct 14, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My computer is not connected to the internet


modem and router are working? lights flashing there on modem and router where it suppose to be? restart everything and see starting from your modem, then the router if any, then the computer.

Apr 23, 2011 | Compaq Evo D510 Minitower (Open Box)...

1 Answer

Is the Zoom ADSL X6 modem router supposed to provide connectivity for a 3G Kindle? If so, how do I set things up?


Zoom X6 routers don't work with either Kindles or Nooks- it seems the connect on demand to save power confuses the Zoom router - typically requiring the unpractical fix of rebooting the router every two minutes.

Feb 03, 2011 | Zoom X6 Adsl Modem/router Rohs...

1 Answer

Router wont connect internet


Are you trying to set up the router.
You can do it manually without the CD.
Make sure that your computer is able to go online through the modem.
If your computer is not able to go online through the modem then you will need to call ISP first.
If your computer is able to go online through the modem
then you need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.

Jun 19, 2010 | NetGear RangeMax WPN824 Router

1 Answer

Could not make router to work, Netgear modem adding router.


i suppose you have to connect modem to router's "source" socket and modem to socket "in wall" then reset and reconfig router and you should be ok

Nov 10, 2009 | NetGear WGR614 Wireless Router

1 Answer

Fixing own wifi to dsl modem


I suppose you need to connect the internet using WiFI and not cable DSL . Please follow the below steps.
You need to have a Wireless router in place and connect the DSL to the router , then u need to give an IP to the router.

Configure your laptop to the router device.

Mar 31, 2009 | EnGenius EOC-3220 (EOC3220)

1 Answer

Link light blinking


On these cable modems the link light is supposed to blink when you are connected to a router/pc. If you are hooking up a wireless router new you need to power cycle/reset your cable modem before you hook up the wireless router so that way it can refresh its ip address.

Mar 21, 2009 | Arris Touchstone 450a (CM450) Modem

1 Answer

Connecting the router and the modem


there's a lotta videos on youtube that can help you out, here's a good video.

http://www.youtube.com/watch?v=rEUAAiAIKbw&feature=channel

Dec 30, 2008 | NetGear WGT624 Wireless Router

1 Answer

I have connected my Wireless G Router #F5D7230-4 to the modem as instructed in the instructors manual and I am unable to obtain a internet connection. I have tried to disconnect from modem and router and...


what kind of brand is it? and make sure your ethernet cable pluged in back of router where its supposed to be and reset your modem first when lights start lighting up reset your router...by reseting i mean unpluging power from equipment...hope that helps

Aug 23, 2008 | Belkin Computers & Internet

2 Answers

Hooking ethernet to broadband router and cable modem


Hi Sherry - The etherport port on your modem should be connected to the WAN port on your router. You then connect your pc to one of the 4 ethernet ports on the router. If this answers your question PLEASE rate this as fixed. If you need more help just add a comment and I'll be happy to assist you further. Thanks.

Jeff

Jul 10, 2008 | SMC Universal Wireless Broadband Router...

Not finding what you are looking for?
Belkin N Wireless Modem-Router F5D8633au4A Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Are you a Belkin Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...